Added: 2 years ago
From: conleyprecision
Views: 296,074
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (163)

Sign In or Sign Up now to post a comment!
  • thats sweet haha

  • what size tubing did you use in the dragster? cause i want to create my own chassis for a model and possible install a conley in it.

  • It would really be some thing to see it run down a drag strip :D

  • i dont think top fuel dragsters use twin screws, dont they use roots blowers

  • it took me like half the video to realize this wasn't a full scale car

  • I got the plans for one of these v8 motors if anyone is interested

  • That engine sounds sooo cool! I haven't heard one that small have such a "cammy" idle!

  • is that a quick change rear end

  • what kind of shaft do you have connected to the engine and rear end.

  • Wtf is this shit?

  • Does it actually move?

  • @RR1Joel you see the wheels moving? that means yes it does move

  • @faded2blak Yes I do see the wheels moving. Do I see the car moving? No. I have never seen one of these motors in a car that actually is driven.

  • @RR1Joel if the wheels move then that means the car moves....simple as that

  • how fast she go

  • Home improvement "TOOL TIME" MADE ME LOOK THIS UP.

  • these people r rich

  • I think it's very cool...

  • What's the deal with all your guys videos of this POS stinger 609? NOBODY WILL ACTUALLY MAKE SOMETHING MOVE WITH IT! """WHAT'S UP"""?

  • wow i just built a 10.5 outlaw car with a 618 ci blown injected big block ford for the same as this. you need to lower price conley....alot.

  • @Cocokingable1 $20,000? Not. You're running a 618, with forced induction, fuel injection, and can only pull a 10.5?

    You must wipe when you pee. Or you have this set up in a bus.

  • @qwertywrangler hey dumbass 10.5 is the CAR CLASS FOR DRAG RACING. it will run 5.70s in the 1/4 mile

  • @Cocokingable1 Good. I was starting to think you were sniffing glue or something.

  • would this motor be able to move 450+ lbs? i want to make a custom go kart with fiberglass promod mustang body. 

  • monsterous, is that a real alternator?

  • Damn, sounds like my weedkacker

  • So is the engine capable of making something move? Or is it just an idler.

  • @zeppelin67637 You did see the back wheels turning... No?

  • @qwertywrangler sure but, I want to see it actually make a drag run lol

  • @zeppelin67637 Same here.. but, I would be cautious about whoring out a $20,000 RC car.

  • So is the engine capable of making something move? Or is it just an idler.

  • Run the thing. Just take it out and run it.

  • I have made a mess in my pants and there is cream all over

  • Ive been looking for a while and ive yet to see anything with this motor move an inch. :P Anyone have a video of it actually preforming?

  • i soooooo wanna see it do a burnout!!!!!!!

  • There are tons of these Conley videos, but very few that actually show a car in motion... a little irritating. I sure wish I could afford one of these things, it would go right in a quarter scale boat.

  • for the amount of money you pay for this you could get a brand new crate motor.....and then some!!!

  • does it run top fuel?

  • To - @mcf3778

    Regular Gas, 87 oct is recommended.

  • hp?

  • To - @memcu30

    5.5 for the non-supercharged, around 9 HP for the Supercharged version.

  • i kinda want to build a 1/4 scale sc truck with one of these now..

  • Comment removed

  • To - @grillmasterjoey

    Do a search for 1/4 Scale Grave Digger It has a Stinger in it.

    :-)

  • @rcWizzard ive been following the vids and its looking awesum about how much torc do they have?

  • To - @grillmasterjoey

    That I do not know.

  • damn those zoomies make it sound real good

  • Amazing!!! Lets see it run

  • has a bad ass vehicle and never drive it.

  • these should cost more than a real one. I can't imagine the time you've invested. Amazing

  • its bad ass :) realy nice :)

  • thats a cute little jack you got there

  • you know whats funny about Conley engines?  despite how badass they are ive never seen one in action...they are always idling or just grunting but never all out .... is it the price>?

  • Seriously, how much do your neighbours hate you?!

  • @MrSpinalColumn probably not

  • @baptistedeschrevel I was just talking about the noise...

  • @MrSpinalColumn i know :) but rcwizzards neighbors don't hate (they actually really like him) him and he has got a stinger 609 too ... so that why "probably not" :)

  • sounds like a minature dragster engine

  • Are the wheeles from a gokart?

  • Is it just my imagination or is there a tiny little supercharger whine which goes with it. Thats 7K worth right there

  • drop it down just a tad and lets see a burnout :)

  • This is soooo F-ing cool!

  • WHAT the FUCK. 7 big ones for a mini v8? let see what I have in my pocket ive got 102 dollars and 68 cents and some pocket lint. now im looking at 108.62$ hmmm Ill give you the pocket lint ill take off the air filter and shit on it, oh and can I piss in the radiator?

  • i want such an engine in my pocketbike..must be cool :D

  • every single video of a cool Conley V8 setup, is just sitting there.

  • Dear Santa...

  • when you buy it does it come with the tranny and all and turn key ready to go? for $5300?

  • To - @TraxxasTM33

    Yes, Tranny is included, but does not have any gears. Uses a centrifugal clutch.

    A water tank is not included, an oil tank and oil lines & filter are included.

  • is that a 2 stroke or a 4 stroke engine? <3 it!

  • @weetnietgeen yes it's a fourstroke, its got the valves

  • @mr06692 I'd like to hear a 2 stroke version with exhaust chambers all tuned slightly different. Bet it would sound real nice.

  • @weetnietgeen 4 stroke

  • some people never grow up, they just can afford the more expensive toys

  • @joshuahenderson3 indeed. isn't life great?

  • awesome

  • really cool til you crash! LOL!

  • how do i get a job building those?

  • Dude, Bad Ass!

  • lets see a WOT run!!???

  • I thought it was full size.....

  • Everything about that little motor is badass!

  • man that is wicked

  • yeah seriously, i'd rather buy a hayabusa, atleast i can go 200 ON it lol.

  • @HeyMan096 or atleast 30 lol

  • Nice what kind of camera is that? :) very good quality from so close.

  • Dude if i had one of these my neighbours would probably call the cops thinking there is someone doing burnouts in the street!

  • HOLYYYYYYYY SHHHHIIIIIIITTTTTT I WANT ONE

  • wow i clicked on it hoping to see a 606 CID top fuel dragster :(

  • This is quite possibly the sickest thing i have seen in my entire life :)

  • Ive been seeing those big yellow hoses alot lately ... what are they ?

  • @iTzzEuphoriaaaaaa fuel lines

  • sounds so beautiful you should make a v8 with dohc and put it in a ferrari 458 body!

  • I will give you 8000 euro for the model tell me if you sell it. it is not a joke

  • Autocat car?? 

  • hey ill give 6,000 for that model !! nooo bull !!! email me let me know if you will sell it ...

  • $13.5K with tested and installed SC

  • lol it has a little trolley jack under the car

  • How much would just the engine run me?

  • @HeyMan096 5-7 grand depending if you want it supercharged

  • @nitrojunkie1029 thats completely without the rest of the car? damn.

  • @HeyMan096 yep, you can buy a hot rod for about 13,000 might as well buy a cheap full size beater car lol

  • i can listen to this all day

  • Can we get an ET? I wanna see how fast this baby is!!!

  • I need one to piss off the guy that lives two houses down me. Or run his dog down!!!!!!!

  • Couldn't you run this on nitromethane?

  • V8 6.09 ci( nearly 100cc) 5.5 hp at 9500 rpm and it costs now (25:06:2010) $5.695

  • Real live v8 put into a shrink ray, awesome!!, but at $7,500 that is a very expensive toy, and that's just for the engine right?

  • @TRXfiend that is correct

  • i love the fact that you can see all the cylinders firing its music to my ears beautiful piece of art man my complements to you

  • @smackers99 Ps: i just looked at your site and was thinking would it be possible to make working blower flaps that would be extremely sick

  • ya dude its cool.. but put it on a table er something to see the scale..

  • Conleyprecision, how much horsepower does this powerplant put ot?

  • WOW all i have to say everytime i hear this trhing....

  • WAY beyond cool!!!!!

  • you guys should make a mini turbocharger

  • that's for if they make a mini Inline 6 cummins diesel

  • dude make a video of it running please!@!!!! pzlplzplzpzlpzl!!

  • I want one hooked up to a Margarita Machine for the bar...

    should satisfy botth needs...sound and taste... now lets see that thing smoke those fresh slicks..

  • drive it

  • too bad he lives 900km from toronto

  • what fuel do you run in it reg octane gas acohol nitro or a mix

  • so how quick is it on the quarter size quarter mile? lol.. ever thought of doing that?

  • man you are not kidding, that`s just freaking cool i dont care who you are.

    i saw a roadster in hot road about 16 year`s back with a working v8, stearing, radio, disc brake`s. etc.... were you guy`s the builder`s??

  • I just found out about these people  they have a site and they made that v8 they have a few difrent engines too

  • That is, without a doubt, the coolest thing I've ever seen!

  • Awsome when are you making a pass??

    How much? I need one

  • can u put up a video of it moving that thing is so bad ass

  • is their a video of this thing racing or driving

  • the engine its self if $6k

  • actually around $7.5k with the supercharger

  • holy crap thats allot i may get one if i saw one running on a strip and it looked like it ran pretty good times like the one's in dash for cash

  • nice paint job u mak it your self and how much that car set u back ??

  • Great job!

  • Very nice job. Has deeper tone with the blower.

  • one day i will have one.. one day...

  • how much would cost to make one those i was thinking about makeing a big foot

  • where did u get the motor at

  • he makes them

  • i want to make a 1/4 scale Tractor Puller with that engine. YES I KNOW... im a hillbilly. lol but seriously, it would be awesome! to me anyway...

  • god damn, felt almost weird when you zoomed in close. So close to the real thing.

  • AMAZING!

  • SWEET!!

  • god i want one so much

  • i know me to.

  • Very impressive!!!

  • amazing although they only have about 8bhp, I figured they would have much more than a single cylinder engine of same size (100cc ish).

    r these spark/otto cycle?

  • 8hp is allot for such a small engine! Allot of lawnmowers aren't even that much. And those engines are huge by comparison. I want to see this thing make a run down the track!

  • 8bhp for 100cc isnt much, considering 100cc singles on bikes have around 10bhp.

    usually u get more bhp when u have more cylinders per CC as effectively u have more valve area, thats why in years past honda made 5 cylinder 125cc bikes, real screamers they were.

    I think when u get this small the valve stems have to be quite thick so this restrict them a bit as far as inlet flow goes.

    still dam cool!

  • lots more torque, lot lots more

  • I love Thanks for the Video ... put it on Our website if you want Thanks

  • u should rake it rc and fing out what it can do

  • yes yes, It would be be great to see it run under its own power, even a easy short run.

  • how is that a model of a top fuel engine,a long way to go i think!

  • y be critical of something so amazing?

  • (BIPOLAR)pilot

    duh

  • what is the top speed of this and what compresion is it because the rpms shoot up and then down insanley fast,

  • it's just because of the scale. The rotating mass, is so small on it. Also it's supercharged etc.

  • tro bien le stinger 609 avec compresseur y m'en fo un pour mon anniv la franchement chapo et pi le brui bo

  • i was mislead on the size of this thing until you put your hand in the frame after you started the engine! This is an amazing piece of engineering!

  • WOW !!!! Gary this looks AWESOME !!! Congrats !!! I know how much you have gone through to get it " just right". JAC

  • I know this sounds ridiculous but i got wood when i saw this, Conley precision is in FUCKIN' credible!!!

  • not weird at all man!!! i did to!

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more