How To: Airsoft Gun Painting (S&W M4505, H&K G36C, FAMAS F1)

[MrFuzzleWuzzles]

thanks nice videeo man

[dooch9]

@MrFuzzleWuzzles Thank YOU for watching and commenting!

[MrCargod05]

Do u know how to do digital.camo, I think it's the best.

[dooch9]

@MrCargod05 Unfortunately, I have never done a digi camo before. I plan on learning how to do it and possibly post a vid later-on, however. I, too, think its the best camo you can have, especially during an airsoft skirmish in the woods! Thanks for watching.

[EpicMachado]

G36c looks so nice

[dooch9]

@EpicMachado Thanks man. It all comes down to knowing what you want to keep black (by taping it as cleanly as you can) and exposing what you want to paint so you can get that nice 2-tone finish. Thanks for watching and commenting!

[ChineseDude199]

does the paint ruin the texture of the gun

[dooch9]

@ChineseDude199 It depends largely on what paint you use. Most paints will be fine, but be careful and make sure the one u end up using works well on your gun's surface (metal, plastic, etc.) Spraying TOO CLOSE will certainly ruin the gun's texture and will leave bubbles and lumps of paint, so try to spray about a foot away in a slow, sweeping motion to get a nice, flat, even coat. If you want a second coat so it looks better, then do the same slow, sweeping action. Thanks for watching!

[GranTurismo360]

@EchoX3Airsoft Umm, please do not speak as if you're a Call Of Duty Nerd... Just because you play Call of Duty doesn't make you an expert on guns... Or Camoflauges. Camoflauges are meant to blend in with the environment, and avoid being spotted, not for fashion and bragging...

[crazydave360]

Awsome guns btw. How did u even get them in black in the first place?

[dooch9]

@crazydave360 I think they were all black when I bought them... I had to shop at a few stores though (dick's, sports authority mainly) and had to wait until they started to carry realistic looking airsoft guns that were black. Thanks for watching and commenting!

[Toxonic0]

@crazydave360 Almost every supplier in the USA has most, if not all, of their guns in black. It's rare to see a decent quality gun that is clear in the US.

[stevensonblake123]

dude use the wasp camo-yello or oragne 4 primary-then gray-and black its 2 sick look it up

[maxaslagolis]

I HATE GOLD GUNS DERR UGLY!

[XxdamstaxX]

im scared to paint my gun with any paint i have a g36c and i want to paint it orange tiger with a white star somewhere what type of spray paint do you suggest?

[dooch9]

@XxdamstaxX Look for paints that say on the cans that they work well on your guns body type (ie, if your gun is all-metal, look for the paint's "Best Uses" to be metal and you should be fine. The same goes if your gun is plastic or some type of polymer material./ Thanks for watching!!

[slashdeciple99]

did he fart at 4:32?

[OrangeOctopus3]

Sweet video! I'm planning on painting an M14, but I don't know what design to use. Any original ideas?

[dooch9]

@OrangeOctopus3 Tiger stripes!! Those always look sick on an M14. Red and black or red and white alternating would look beast. I would have the stripes going up like this: ^^^^. Just cut-out a pointy stripe like a tiger, hold it up and spray away!

[96kanyeEast]

@dooch9  hey man i have a jg sig 552 commando do u have any suggestions on painting

[dooch9]

@96kanyeEast Wow thats tough cuz its such a nice gun in all black! Hmm.. If I had to paint it, it would prob be a desert camo, kind of like my hk g36 in the video. You could paint some parts desert camo and leave other parts black! That would look sick and would break up really nicely! Maybe a digi-camo would look cool too, but I havent done one b4 so I couldnt help ya there. You have a lotta options cuz its a great looking gun! But in my opinion an all beige desert camo is where its at!!

[96kanyeEast]

@dooch9 thanks for your input man i was actually thinkin bought painting the handguards and the stock desert and leaving the receivers their original metal color

[domtheglitch]

It's Fa-mos, not Fa-maos.

It's a french word. ;)

[SUBdrumnbass]

uh, im ordering a g36c src in august, how does matte white body, with gloss orange and grey digital camo sound? Since you know what your doing, please reply! :)

[dooch9]

@SUBdrumnbass Wow that sounds sick! Make sure the paint(s) you use say that they work on the surface of your gun (plastic, I'm guessing?), and don't over-do/over-paint it, 'cuz it WILL get ruined! Remember to spray in a sweping motion about 10 inches away.  The matte white and the gloss orange paired together will DEFINITELY make it pop and will wow your friends for sure! I don't have much experience with digital camo, but it sounds like you can handle it! Thanks for watching and commenting!

[SUBdrumnbass]

@dooch9 I realised this shit is slightly tricky, so i'm getting a cheap gun as well as the g36, just to test it, and if the cheap one breaks, who give a shit? :L Thanks for the tips, kinda my first time spraying a gun, i've on sprayed cars and bikes. :) Also, that G36 is similar looking to mine? Is it the SRC version? or the better one.

[jemattie100]

Cool video Nice arctic!

[idommimon]

those are from Dick's sporting goods..... right?

[dooch9]

@idommimon The S&W pistol and the H&K G36C are both from Dick's, but the FAMAS F1 is from Sports Authority...

[famas470]

Y do u have to cover the trigger

[dooch9]

@famas470 Since your fingers will most likely be on the trigger, painting it will be pointless because the paint will chip with excessive use. By covering it with tape, you keep the trigger black/original color, so you can fire comfortably and smoothly without having to worry about chipped paint or a slow, squeaky trigger.

[NFS13EPIC]

@dooch9 i want you famas

[dooch9]

@54321Leonardo12345 Personally, I do NOT do that. But you could, because it wouldn't hurt. For example, you may want to do flat then glossy if you want more durability in your paint because you use your gun a lot. Or you can just do glossy then glossy. For my guns, I just give a healthy, liberal, glossy spray back and forth several times until covered, but only once. Then it dries and I do the other side. This way works best for me! Just remember to spray at least 8 to 10 inches away!! Thanks

[sickairsoftpainterz]

its still a great vid though

[sickairsoftpainterz]

how many times did you say umm

[dooch9]

@sickairsoftpainterz lol I know my bad. This vid was up b4 I finished my public speaking course in high school so I "ummed" a lot. I apologize but I'm much better at it now. Thanks for watching though!!

[dannnyp1]

@dooch9 hi im getting new gun soon it called BB G36c (M85) Fully Electric Assault Rifle (Orange) and i was wondering can u show a video how to stop the paint going inside the gun please reply thank u :) nice video any way

[dooch9]

@dannnyp1 Okay, so you want to know how to tape certain parts so that when you do paint it, the paint won't damage the inside, right? :)

[cousinjamie1]

i have a see-through famasF1 and it has no belt or muzzle grip or stand, just a plain one. is it ppossible to paint it solid? or will you still be able to see through it?

also, where can i get a SIIIICCCKKK scope like a reflex? or ACOG it is also not batterie powered

[dooch9]

@cousinjamie1 Yes, you can certainly paint it all solid black! Tape-up the critical parts, like the orange muzzle, trigger, or any gear openings, etc., then go ahead and paint a couple coats of black, if you'd like. Make sure you spray in a distant, sweeping motion (10-12 inches away from gun), and use glossy black paint.

For a scope, you can get a sturdy, reliable, great-looking, accurate TruGlo Red Dot Sight from Dick's Sporting Goods for $39. It's battery-powered, which is better. Thanks!

[cousinjamie1]

i have a see-through famasF1 and it has no belt or muzzle grip or stand, just a plain one. is it ppossible to paint it solid? or will you still be able to see through it?

also, where can i get a SIIIICCCKKK scope like a reflex? or ACOG

[Theperson2121]

hey, nice video. i want to paint an Hk G36C. Gold. but i dont know what to paint, the body, or the Mag, rails, hand gaurd,? also what paint should i use? The HK G36c is absolutly my favorite gun, and i failed a bit painting my pistols. but ive learned. what do ya think. should i do it?

[dooch9]

@Theperson2121 DON'T paint the mag, handle, or any of the (4) rails on the gun. These parts are all subject to much wear and tear, and painting them would be a waste; the two-tone will look sick if you left them black!! For paint, use ANY kind of GLOSSY gold paint that sticks well and wont chip (for example, if it has a plastic-polymer body, get a paint that SAYS ON THE LABEL that it works well on plastic) Deff do it!! Read my description and other viewer's comments for hints/tips. Good luck!!!

[Theperson2121]

@dooch9 thanks but as i was thinking on what to tape and what not, i discovered that simxe my gun is clear theres a problem i found. so you know the red and white Hk G36c label with the 3 pictures of safty, semi, and full. all of the is on a clear body . urs came in black sso its easeir for you to just cover the labal up. i know its not really a problem but i like the label there. should i paint over it?

[dooch9]

@Theperson2121 Some options: if you REALLY like the label, then tape it up but it will still be clear. If you dont think that it will be the end of the world if you paint it, then go ahead and paint it gold. Just beware of the safety issues overall if you cannot see the selector switch options. Before you paint over it, take a picture with a camera of the h-k label and the safety, full, etc. labels and then paint it. When dry, refer to the picture to repaint (if you'd like) those writings.

[Dracado]

I want to paint my JG G36C exactly like you did but I'm terrified... I really don't want to mess it up.

[dooch9]

@Dracado Great gun. And okay, a great tip is to hold the can far enough away, and spray in a sweeping, horizontal motion (if its one solid color). It may take slightly longer to paint, but it wont puddle up and it will look fresh. Also, get a high quality masking tape that sticks really well, and try to get the tape in as many nooks and crannies as you can. Be precise with the tape and picture what it will look like before you paint it. Have fun and let me know if you have any questions!

[Dracado]

@dooch9 Thanks a bunch for all of the tips. I am mainly afraid of screwing up the internals, rather than the paint. I guess I'll just have to use a ton a masking tape (which is fine since I have a TON of it laying around.) Thanks again!

[dooch9]

@Dracado No problem! For the most part, the internals should be fine on the g36C. The only real concern might be that you plug-up the barrel so paint doesn't drip down, and to tape over any moving parts on the outside that could leave an opening to the inside (ie the trigger). Other than that, you should be fine, just use common sense and I'm sure it will come out great! Thank you again!

[mhmuknowimbad]

could you please make a video of you tapping and spray panting the famas i just got one and i dont want to mess it up. thanks.

[renaldasskripka]

can you make a video on about famas, because i have it and i want it to be more cool and look better

[ShootAllQueers]

could you please make a video of you taking apart the smith and wesson 4505, i got the same one and dont wanna mess it up

[dooch9]

@ShootAllQueers Unfortunately, I cannot take apart any of my guns, as that will void any warranty. You will probably mess up your guns even more if you took them apart, anyway; you won't make them any better. However, I can post a video of me taping and painting the m4505, if you'd like, but taking it apart is certainly out of the question... Thanks for watching and commenting!

[707Airsoft]

The beige/tan looks dope on the G36.