How To Remove Bumper On VW Golf GTI

[thegun98]

very helpful :D thanks

[jezbarlow]

Great instructions. Thanks for the post.

[tonyshores]

this video was very helpful so easy when you know how thanks

[jrpslappy]

i like turtles

[EmperorChinn]

Good little video mate, it all helps. Thanks.

[mus82uk]

you dont need to remove the bumper mate:) you just need slightly smaller hands

[BubblegumBrian]

is that the 1.8T or normal 1.8

[sgowland14]

i have the 2011 its imposible to take off

[TheAndyeckles]

Do you have to remove the bumper to replace the lower grill? Mine broke and hoped I could replace it easy enough.

[JcHopZ303]

thank you for posting this it really helped. i have to replace radiator. hit a dog.... any tips for the radiator

[scionttc]

did it today just for fun!

[t0umart0u]

Do you have a tutorial somewhere to remove the rear bumper on a golf MK6 please?

[aadunlap3806]

THANK YOU!! I was taking apart my front bumper today to change my headlights on my Jetta and the Haynes manual pretty much left me in the dark..a lot. This video was sooo helpful! Just wanted to say thanks (: much appreciated

[DudasMiska]

thanks man helps a lot

[mudslider20]

Good job Bud, thanks for putting this up

[TheNewMusicNetwork]

german cars are pretty amazing. japs are good at copying german tech/reverse engineering but they still can't do it well enough.

[ken71607]

im only mad people couldnt figure this out on there own.....just saying

[jpsspark]

do i need to remove bumper to replace leaky rad

[inktoxicated]

it is easy once u see it done its when u never seen it done u start breaking shit lol

[policeman1313]

I just found this in my favorites. I was going to remove my bumper and repaint/repair it, but I tried doing it the Bentley way, and got nowhere trying to remove the locking mechanism. FML!!!!!

[VWJasonGLI]

Thanks for this video I had to install my intake on my 24v vr6

[sfconfidential]

Is this the same way for 98 cabrio?

[Tontino007]

Thanks - you have just saved me £270 to fit a new headlamp (VW authorised dealer) - nice video buddy

[imbaman55]

how about just changing the front turn signal? mine was broken and need to change it.. the lamp that is. Is there easier way than taking the whole front part of my car down?

[wlfpacknwo]

@imbaman55 just push the front of them in and slide one side into the car and pull the other side out takes about 10 seconds then just disconnect the bulb on the wire behind them.. side markers and turn signals on bumper come out the same way.

[Escortgtt]

Thanks you !!!

[billyt4515]

sweet video, i would have never found a couple of those screws

[scrivy123]

thanks so much

i was struggling lol

[golfgtimm]

thanks for this video it was very usefull for me...

[goranm2cool]

This is Great help for me! thanks, Thanks!!1

[mthomas73]

Brilliant & helpful video, I'll be watching it with my laptop outside :-)

[hwyfly]

Thank you SO MUCH for posting this video. I know I would have undone so many unnecessary parts and pieces in trying to figure out how to do what you showed to be a very simple procedure. Wish I could buy you a beer for that.

[hwyfly]

Thank you SO MUCH for posting this video. I know I would have undone so many unnecessary parts and pieces in trying to figure out how to do what you showed to be a very simple procedure. Wish I could buy you a beer for that.

[infntry69]

dude badass. can you show how to put an exhaust system on?

[cabrilo1980]

Awesome. Thank you.

[britishvaluesforever]

Its looks easy! Now to fit my my R32 bumper . Thank god someone posted this.

[tonylockhart1963]

Top guy for posting this. Well done and thanks.

[phaelox]

Thanks

[logmonkey]

Super! thanks.

[poundflicker]

Thank you , plain and clear.

[casper123]

Thanks for making this vid, cleared it up for me. Cheers.

[cantaco]

After a huge headache trying to figure out how to remove the headlight bulbs, plus the H.I.D. wiring from the previous owner, I came across this video. Thank-you, Thank-you. Awesome, easy tutorial. bulb replacement is easy now.

[Chestozo]

Thank you very much! Great tutorial )

[scottbrdy]

hey this vid helped me so much...thanks..ha it was so easy

[DesiGuNDaM]

dude....uo got a video on how to remove the rear bumper? great video... now i can fix on my r32 bodykit... =)

[klramon]

I am amazed how easily you can take this car apart! Well done vw! :)

[whoiszizou]

@klramon VW was made by Hitler obviously it is going to be excellent

[klramon]

@whoiszizou You are a fucking retard! Vw was made by the Ferdinand Porsche!

[whoiszizou]

@whoiszizou You are the fucking retard Ferdinand Porsche designed VW on the request of Hitler. In 1933, with many of the above projects still in development or early stages of production, Adolf Hitler declared his intentions for a state-sponsored "Volkswagen" program. Hitler required a basic vehicle capable of transporting two adults and three children at 100 km/h (62 mph). Hitler chose to sponsor an all new, state owned factory. The engineer chosen for the task was Ferdinand Porsche.

[nutschTM]

@whoiszizou correct, just one more thing to add : volks-wagen=people's car

[SwindleCon]

@whoiszizou has anyone noticed that whoiszizou called himself/herself a fucking retard?

[whoiszizou]

@SwindleCon shut up clever pants

[75kevo]

great video! made my headlight change painless!

kevin

[ohcysp242]

Thanks, this saved me from alot of frustrations (even though the standard Golf MKIV differs a bit from the GTi).

[windoosxp]

Thanks man, this is very cool.

That is a very informative movie.

Even me can do it now.

Thanks a lot from jan

Amsterdam

[gcon92]

did not know about the light switch lol

[VYR321]

Thanks a lot man, good tips! Got any more on MK IV? I also have a black 1.8T GTI.

[bindley954]

Thanks for the video it saved me much time and a great bit of frustration.

[inksinks896]

yh thanks for the help matey i got a hid 8000k light kit went to put it on my car couldnt take out the headlight i called a person to install and he said front bumper needs to come offf so people front bumper offf frist illll post once my hid kit has been fitted sweet people

[Libanass]

I need to remove my rear bumper of my new beetle vert

any videos possible?

[bieli0]

just like me (and probably half the other people out there) i like to work on my car at the most inconvenient times. RIGHT when it get's dark outside. then you can only work with one hand, since the other is holding a flashlight. xD

[vwVDUBvw]

wow good presentation A+ vdubs for life thanks saved me dough on installing new headlight units respect

[808bigpimpin]

Would I need to do this to remove the headlights as well?

[EdiotTom]

If you need to remove the headlights... Yes

[bindley954]

Yes

[mightycarmods]

Excellent video. Helped us with our Mighty Mods videos. Cheers! MOOG

[juan512]

nice!...does anyone know if an H7 HID Kit will fit on a 2003 1.8 gti?...

[bindley954]

Yes it will work.

[MvP1292]

thanks :)

[djclarke]

110% man, thank you!

[pollathavan11]

can you please make a video on how to remove the rear bumber please?

thank you

[ozzy2912]

respect man saved me some £50 good man

[gary178707]

wao grasis

[maemaisagat]

thx for the tipp man ur the best

[MrPhenomenal]

i appreciate you uploading this. saves me the hassle of figuring it out.

[KLA551K]

is this the same procedure for mk3's? i need to replace my front bumper.

[RipRapRob]

Thank you, this was a great help, not having to figure it out myself.

I've just changed the left headlight on my Golf IV (not GTI) and I watched your video just before starting the work.

For others: The procedure is just the same for the non-GTI-model, except my Golf has no sidelights.

Thanks again! 5 of 5!

[motorolla35]

wut do u tink bout angellights on a golf?

[Ryan00Diesel]

I wonder if that is the same way you do it for the mk4 jetta?

[EdiotTom]

Yes its the same for the Jetta too.

[BIGULI1989]

Thanks 4 the DIY video man u saved me some money.

[wakoe923]

amazing vid....with out it i wouldve never been able to do it....thank you

[MavBam]

Thank you SO much! My n/s (UK) headlight got smashed my a bolt on the motorway. All I had to go off was where the screws were on the new replica headlight (only 2 screws on top). It was only when the old headlight didn't come out did I realise that I needed to take the bumper off to get to the other screws (which you have confirmed in the vid). Was going to cost me upwards of £250 p&l! Now, thanks to your vid, it's cost me only £45 :o) Oh Yeah! Gigidy gigidy!

Thanks matey!

Mav

[watchinthevids]

Thanks for the good job on the vid. Just made my day much easier.