advanced hydrogen smoke from a bone cold cell!

[Bobolicx]

i love your vids!

[altairdesouza]

for a generator hydrogenio with 7 boards should be configured as N-+.

[Fontijn5]

i see also sream.. its bad for the engine???

[denis78467]

hello, i have some question to ask, i wan"t to know what size and fat is plates in cm... ? and the space betwen the plates. thanks

[hydrobenman]

Hey great looking cell, can I ask what are you using for the end plates? is that metal or plastic?

[advancedhydrogen]

the end plates are metal [ mild steel] with silicone gaskets to isolate the steel from the chemical reaction of the dc and koh..i have some 1/4 thick 304 stainless plates for my next cell i will post after the holiday fun is over....be blessed bro!

[advancedhydrogen]

cool thanks bing..

[advancedhydrogen]

i thnk we have moved past the present bubbler design because of the massive steam/hho output of the dry cells used above 50 amps!! i still believe that a bubbler is useless after 40 amps with a dry cell!!!

[DMBing]

Final data is in and I Pm'd you the video. I would put the final results in the video response but I really wish peeps would view the whole series to see how I approached this.

Thanks

Bing

[DMBing]

I posted a video response for part one of my series on this topic.

I will have the final video showing my results today.

This might shock some of y'all. It did me.

[advancedhydrogen]

awesome i want to see the video email me and let me know when you upload it!!!

[advancedhydrogen]

some day a lab some where will figure out what this dry vapor is...

[DMBing]

What I am doing to figure this out is this. I am using a refractometer to measure a base of distilled water. I then will run the unit thru my CLEAN condenser and CLEAN bubbler for different time intervals and then measure the difference in the bubbler to the base.

This at least will tell me if the smoke from the tube is indeed burnt KoH gitting to the bubbler. I also have some PH tests and a laser I am going to try as well. I will have this done by weekend and post the vids up. We will find out.

[hydrophoenixx]

Nice dry cell. You can see the vapor but it`s not steam. I`m developing a dry cell and it does the same thing. Some who have watched my videos think the cell is too hot and producing steam but at 120F thats not hot enough for steam. Nice work

[advancedhydrogen]

i have talked on the phone with several youtubers and they all say the same thing what is that visible dry vapor???

[advancedhydrogen]

get this if i put a blue paper towel over the tube it stays dry!!! i am going to make a video of this wierd other wordly event! the gas is dry!!! be blessed!

[DMBing]

Yea, I tried a regular paper towel as well. If you try a mirror and hold the outlet about 1/2" away from the mirror you should (or might) see a vapor trail on the mirror but it dissipates real quick.

That is what had me confused at first. I could not collect the vapor as it dissipated as fast as it could but I could see it in the mirror.

Good luck!

[DMBing]

Nice video. One thing though that I am looking at on my cell is that the (gas) you see is actually water vapor mixed with HHO gas. You cannot see gas. If you place the output hose next to a mirror you most likely will see the vapor on the mirror.

Now where does this vapor come from is the question as the cell is not at the temps to produce steam. My guess so far is it is KoH being burned in the process. I am doing more research into this, but I can tell you that it is caustic to nose tissue. :)

[advancedhydrogen]

that cell got an MMW of 7.15!!! thanks scott

[mytoyatasucks]

that looks better than ur last one, way better. Good going - and going the right way.

[advancedhydrogen]

500 dollars for an assembled and bench tested cell i plan to sell these units soon on ebay! i am trying to get a fair price for 6x6 316 stainless to keep the cost reasonable...be blessed!

[advancedhydrogen]

thank you ! jd.. be blessed my friend...

[jdcmusicman]

Nice man ..