Cheap and effective mods for the Yamaha PW50

[fuckingwhiteman1]

Woww the air fillter look hella gayy but the thing you did with the pipe is smart but u should take out the spark arrestor to sounds way better runs wayy more smooth...

[Kawasakiforlife7]

hahaha that piece in your exhaust is supposed to be there, if you take it out its A) bad for your bike. and B) slower

[domandybiking]

could you tell me how your electrics are setup please i have one of these but the coil is missing so i have numerous wires and i dont know what to do with

[fattzo99]

Do u need to change the mainjet when u remove that blocker from the exhaust??

[domandybiking]

fuck me i bought one in bits from my mate for £5 ( around 8 dollars in your currency)

[HONDASBEST]

octane boster burns up your motor

[orbion2]

Wish i had a camera to show my pw50 xD I learned how to ride on it. Back when i was 5. when i turned 7 i started riding mopeds and the pw50 had been dusting away for almost 11 years. believe it or not but we managed to restart it in under half an hour xD i cleaned it up and tuned it up. it's pimp now. the biggest problem was the steer, as i'm 6"3

[sodomypusher]

does the gas leak from the carb into the radiator hose and clog it up cuz my pw leaks gas out of the carb.

[TheJarhead90]

GET A REAL BIKE!!!!!!!!

[repeatracer]

what happens when you wipe out with that air filter?

[Swatrecon]

You seem to know a lot for a kid that sounds young. Cool.

[199rally]

or just bu 100 octain but im not a doctor so idk

[bigdoo350]

do you know the curve intake

it cost 30 dollars

i use your idea and made it curve

[MrOolliivveerr]

a good way to make them faster is to take the air fillter of completely and fuck me if u want a faster bike just by a 85 or 125 its not rocket science

[TheShellback]

Good job, thanks!

[Spencerian]

Nice Job. :)

[MsDemonify]

Octane booster is bullshit..

[cr500pilot]

You only need octane booster if your motor pings under load.You make the most power with just enough octane booster to eliminate pinging.Any more and it wont do any good.Got that??Eric Gorr can port and do a head mod on that thing for 75 bucks jf you want more power cheap

[danjojomansk8]

hahah i have one of thoses pw 50...i bought it of my friend for 100 bucks...

[jordanwade08]

i cut a circle out of my big filter and put it around the intake with a tie off

[krull196]

i have the same gas can for my rm85

=]

[motocrazy150]

cool. its good stuff

[krull196]

yeah it cant spill

[mrgoldenmatt1]

@krull196 I have the same gas can for my Baja Dirt Bug

[callthemall]

MMT also gives you cancer lol. it's the closest replacement they could find for the lead gas

[motocrazy150]

hmmm gess i shouldnt have spilled that crap on my hands and then went inside to eat...

[nicholasjames42]

i also have a crf150f. i was wonderin if u no of and cheap mods for a jr50

[crf450racer45]

how much dose a bike like that cost used

[motocrazy150]

you could probably find one for under a thousand.

[JsJ2020]

@crf450racer45 i just bought a 2001 in Las vegas for 350. needed a new carb which i found on ebay for 21$. runs great now i wouldnt pay much over 500 for any year.

[dracolyth]

or you could just buy premium gas

[motocrazy150]

thats wat i used but i mixed it with octane booster so it would be better.

[TTRstunta99]

dude come on, the way the filter is sticking out like that, is a dirt magnet. and if you want much more power, do it the right way and mill the head down a few grams to boost compression. also buy a mikuni vm16 carb and re-jet it. and besides, adding octane booster will not do anything at all. the bike was designed to run on regular 87 octane gas...

[motocrazy150]

i actually took this bike in the dirt a couple days ago and the air filter didnt do so bad. besides its not that big and its no problem to clean. also the octane booster does help. it runs better and smokes a lot less. how much does the carb u mention cost?

[tylervanballegooyen]

dude, take the baffles out of the silencer. we did that with my sisters bikee and its noticably different .

[motocrazy150]

ok, how do u do it?

[tylervanballegooyen]

there should be one bolt at either the top or the bottom at the end of the silencerrr if not it should be a rivet and youcould drill it outt.

[thegrudge95]

haha

that looks cool.

let me buy it dude.