i think theyre really cool. they seem like they sound decent. i would put a nice finish and some kind of quick grills and sport em. i have something SIMILAR im doing for a rec room/shop and i came across some jvc giga tube house speakers. although i probably wont use mids or tweeters i think i may throw in the giga tube side "woofers" which are i think 6.5". lol. but theyre actually kinda healthy looking. may not take much power on the coils but they look solid for a little to no budget build.
Shit, you do a fucking nice job... I just built a box for 4 12 inch subs and it doesn't even compare to your boxes... You musta been doing this for YEARS.... lol
wouldnt have wasted any money on these awful drivers =/ even though they might sound nice to you - try building your own frequency switch (or use an active frequency switch) and use some Dome Type Tweeters & Cast Aluminium Broadband Drivers - and youll see the difference ;) and what youve missed there is to calculate the own resonance frequency of each driver - and if you dont have TSP's dont waste money on it. (word from one who builds speakers proffessionally)
@tunecee i did not buy these drivers they are re-used from speakers i already had, what i was trying to prove is that you dont have to spend your life savings to get good sound if you know how to build a good box. They will probably be replaced in the future with dome tweeters and the like. I had a good idea of the t/s of each driver enough to work with. what sorta stuff do you build?
Man that sounds awesome! Your camera did a fine job of picking up the fullness of the speakers. I have some nice headphones on, so that probably helped. Good job man! Looks really good.
but this isnt as T-line design, a T-line port stays consistant all thorugh out the enclosure, yours is more like a tapped horn but its not even that so im not sure what to call these.. and also why so many boxes? if you build a T-line tunned to 40Hz it will play all the way to about 3k! in other words full range output which is their purpose. also you breath in 10 seconds worth of that mdf smoke its the same as eating a handfull of mdf dust..
Quality craftsmanship there barevids, I look forward to seeing the full surround system completed. What AV amp are you using? Migh want to use mono blocks on your T-line speakers for extra umpf & kick.
when i was sleeping i remembered that i once used a tweeter -with an open back- with a 6" woofer in a vented box ,the tweeter farted at low bass and it lost a lot of high notes,it was crossed over but the air from the woofer kept distorting it.going to replace them with cheap dome tweeters.
Hello , while i was sleeping i remembered that i once installed a tweeter in a vented box with a 6" woofer ,the tweeter wasn't sealed and it farted at low bass it also lost the high notes .
Oh and check out my newest video on my rwl2011 channel (for now) which is the new ford focus' advert with Ferrari engine sounds as well as dubstep, dnb + funny speech + fx! Made it for college work believe it or not lol...
Nice gauges in the proton but what are they for lol? Sounds surprisingly good indeed! What's the plan with the car noise now the pioneer you didn't blow up will be at home :P
That SQL is awesome! It was just those speakers hooked up for the music, correct? I though I saw the other speakers free airing but it could have just been camera shake lol,
also at ~ 5:00 .. do you live next to a school or something haha?
Where did you learn to design a transmission line enclosure? if you cant tell me for some reason maby after the builds can you make a video showing off the basics and stuff I would like to build some transmission line enclosures for my 4 8s but i have no clue how to
Making holes with a circle cutter in mdf is really hard. You should first cut a 1mm deep circle and after that you should make loads of small holes which will sort of drain the dust. After making those holes you can cut right through without getting smoke. I must say they sound great. Good job. I can't wait to see the boxes for the 8'' drivers
omg man! you are expert making speaker boxes! in the video the speakers sounds amazing but i think that in the real life those speakers sounds 3 times better :D!
Nice work man, i can't wait to see the video when it's all done ;) .... but whats that song called at the last part of the video ? (that kind of test song for highs, meds en lows) ?
am building an HT my self and i used the sketchup for designing and cutlist plus for the wood cutting you seem to have used a sketchup plug in if you mention it in the description i would appreciate it .
@ABLACKX thanks! i havent used a plugin lol, i just drew rectangles 2440mm x 1220mm and drew on each pannel and moved it around for best fit. then colour coded each box. time consuming but worth it for 100% accurate results 1st time!
@barevids Ok then i must recommend you the program cutlist plus which is awesome for wood or other materials .
And i must tell you that you should put words like diy and ht in the tags so that more people could see this!
and one more thing ,the other circle cutting jig doesn't allow wood to come out that's why smoke come out,so use an in and out motion .can't wait to see them in action and in finish (piano black) ? :P
do you design these t-lines yourself?
tremor1127 1 day ago in playlist Uploaded videos
i think theyre really cool. they seem like they sound decent. i would put a nice finish and some kind of quick grills and sport em. i have something SIMILAR im doing for a rec room/shop and i came across some jvc giga tube house speakers. although i probably wont use mids or tweeters i think i may throw in the giga tube side "woofers" which are i think 6.5". lol. but theyre actually kinda healthy looking. may not take much power on the coils but they look solid for a little to no budget build.
tremor1127 1 day ago in playlist Uploaded videos
try buying a new bit thats the reason its smoking i use them all the time
jc2011NE 2 days ago in playlist Favorite videos
Shit, you do a fucking nice job... I just built a box for 4 12 inch subs and it doesn't even compare to your boxes... You musta been doing this for YEARS.... lol
666xXxXxXx666 2 days ago
Engine management light is on bro :( aha
VinnyZf 2 days ago
please send me a message with all these cuts in inches plz cuz im in america and i just have trouble with that stuff, also will a TS-W2502D2/D4
drwowdrummer 3 days ago
dude they sound amazing even on the camera
drwowdrummer 6 days ago
lol.. i got the same technics amp like you.. ;) i love it
94Atlanta 2 weeks ago
what kind of glue did you use?
eddy94f 2 weeks ago
How many watts are the individual drivers?
they look pretty cheap.. then again looks can be deceiving.
djlobb 2 weeks ago
What software did you use to model your speakers in the first minute of this video?
moofushu 2 weeks ago
good work dude but i cant stand u talking jesus fucck
shomoser12 3 weeks ago
Lol 4:46
MiniMee134 3 weeks ago
FUCK they sound sweet as man. good job!
twistyfish 3 weeks ago in playlist More videos from barevids
what filters are in these?
kjellare 3 weeks ago
wouldnt have wasted any money on these awful drivers =/ even though they might sound nice to you - try building your own frequency switch (or use an active frequency switch) and use some Dome Type Tweeters & Cast Aluminium Broadband Drivers - and youll see the difference ;) and what youve missed there is to calculate the own resonance frequency of each driver - and if you dont have TSP's dont waste money on it. (word from one who builds speakers proffessionally)
tunecee 3 weeks ago
@tunecee i did not buy these drivers they are re-used from speakers i already had, what i was trying to prove is that you dont have to spend your life savings to get good sound if you know how to build a good box. They will probably be replaced in the future with dome tweeters and the like. I had a good idea of the t/s of each driver enough to work with. what sorta stuff do you build?
barevids 3 weeks ago 4
I hate B&Q they suck ass
PsPCRaZy2008 3 weeks ago in playlist Uploaded videos
Man that sounds awesome! Your camera did a fine job of picking up the fullness of the speakers. I have some nice headphones on, so that probably helped. Good job man! Looks really good.
LukesVids269 4 weeks ago
I didn't see any crossovers... ? Are you using active xovers?
robocow2 1 month ago
Your fucking class barevids!
RediffusionMusic 1 month ago
what is the design program you use for box building ?
trevcool3 1 month ago
dimplin rotels!!!
vdennis 1 month ago
Sounds freakin clean.
speakers11223 1 month ago
just saw a t-line video on Vxincars channel, thats what you need! look like you took a few tips from there too?
BassManDanNorthants 1 month ago
but this isnt as T-line design, a T-line port stays consistant all thorugh out the enclosure, yours is more like a tapped horn but its not even that so im not sure what to call these.. and also why so many boxes? if you build a T-line tunned to 40Hz it will play all the way to about 3k! in other words full range output which is their purpose. also you breath in 10 seconds worth of that mdf smoke its the same as eating a handfull of mdf dust..
BassManDanNorthants 1 month ago in playlist Uploaded videos
Quality craftsmanship there barevids, I look forward to seeing the full surround system completed. What AV amp are you using? Migh want to use mono blocks on your T-line speakers for extra umpf & kick.
Joe.
2ndSSBggydbluds 1 month ago
Tiesto 4 Life...nice speeks, good job..put them in line where you sit, not on the floor..
bego2 1 month ago
-_- second time writing
when i was sleeping i remembered that i once used a tweeter -with an open back- with a 6" woofer in a vented box ,the tweeter farted at low bass and it lost a lot of high notes,it was crossed over but the air from the woofer kept distorting it.going to replace them with cheap dome tweeters.
ABLACKX 1 month ago
Hello , while i was sleeping i remembered that i once installed a tweeter in a vented box with a 6" woofer ,the tweeter wasn't sealed and it farted at low bass it also lost the high notes .
ABLACKX 1 month ago
god damn dude o_O amazing work on this stuff!! they sound amazing, just the two of them!! =D
TheSamson50 1 month ago
what speakers are these? and what type of crossovers do you use?
si1entscorn 1 month ago
@si1entscorn oops commented before i finished watching the video
si1entscorn 1 month ago
Man they sound good.
xxjr963xx 1 month ago in playlist More videos from barevids
Great video!
EXOcontralto 1 month ago
Oh and check out my newest video on my rwl2011 channel (for now) which is the new ford focus' advert with Ferrari engine sounds as well as dubstep, dnb + funny speech + fx! Made it for college work believe it or not lol...
RWL2012 1 month ago
Nice gauges in the proton but what are they for lol? Sounds surprisingly good indeed! What's the plan with the car noise now the pioneer you didn't blow up will be at home :P
RWL2012 1 month ago
wow they sound amazing! cant wait til your finished with the build!
cobrabrazeel 1 month ago
would be interesting to listen to these
MrDannyboi16v 1 month ago in playlist Uploaded videos
partsexpress sells some low pass filters you could get a pair of 80-100herts low pass for about 20$ for the pair
omfgg3tlost 1 month ago
@omfgg3tlost sorry high pass
omfgg3tlost 1 month ago
Cool! Did somebody design your t-lines or did you do it yourself? If so where did you find the info?
SharkRangler 1 month ago
That SQL is awesome! It was just those speakers hooked up for the music, correct? I though I saw the other speakers free airing but it could have just been camera shake lol,
also at ~ 5:00 .. do you live next to a school or something haha?
cjdog23 1 month ago
@cjdog23 thanks! Yeah only these hooked up i can assure you. And yes I live right next door to my old primary school haha.
barevids 1 month ago
sounds really warm and rich. good job man.
pr55jjtube 1 month ago
those sound amazing what program did you use to design the boxes.
speakerman705 1 month ago
sounds great!
SPEAKERSRULEMYWORLD 1 month ago
nice man excellent work
keithmoonlethal101 1 month ago
top job, love it!
part 2, come on!!!!!!!!!!!!!
smsno1 1 month ago
@barevids sound fricking fantastic!!!! thats amazing from wat im hearing
igtcx 1 month ago
Where did you learn to design a transmission line enclosure? if you cant tell me for some reason maby after the builds can you make a video showing off the basics and stuff I would like to build some transmission line enclosures for my 4 8s but i have no clue how to
BassPounderX 1 month ago
why didnt you counter sink man :(
zingaudio 1 month ago
awesome sound even through camera. dunno whether to make some mids and highs myself
andythewooferguy 1 month ago
KICK ASS JOB BRO LOVE IT
raidercann1 1 month ago
Waiting on more. Great stuff.
WarEffort 1 month ago
LMAO the speakers are like this emoticon > :O
grannygotswag 1 month ago
Making holes with a circle cutter in mdf is really hard. You should first cut a 1mm deep circle and after that you should make loads of small holes which will sort of drain the dust. After making those holes you can cut right through without getting smoke. I must say they sound great. Good job. I can't wait to see the boxes for the 8'' drivers
PA5cAl1 1 month ago
omg man! you are expert making speaker boxes! in the video the speakers sounds amazing but i think that in the real life those speakers sounds 3 times better :D!
keep going bro! greetings from Chile
xjevxbz 1 month ago 2
Man u know that bigger drills mean slower speed???
Small drill = Fullpower
Big drill = Litle power ..
thats why its smokes so mutch when u drills .. it goes to fast and it gonna burn your tools .
Try to easy upp your triggerfinger and u will maybe get a bether result .. :)
Jimpa31 1 month ago
Nice work man, i can't wait to see the video when it's all done ;) .... but whats that song called at the last part of the video ? (that kind of test song for highs, meds en lows) ?
Bignacho25 1 month ago
this is sooo cool! :D watched at fullscreen
negerauto123 1 month ago
The kids in the background were tripping me out...couldn't figure out where the voices were coming from.
NcHalfrican 1 month ago
those sounded awesome on my computer speakers
Carmiel08 1 month ago
that was fast cant wait to hear the full set up, whats the song that was playing in your car
matstarful 1 month ago
FUCK YEEEAAAAHHH!!! love your work man
ItsMattttt 1 month ago
Thats how Bear Grills makes fire. 6:45
TheDjmille 1 month ago
How much did that lot cost, just out of interest?
AleksandrsLV 1 month ago
nice computer
Micheal153 1 month ago
Sounds nice.
donbehatin 1 month ago
Looks great, sound even better! Thats awesome man, I'm really going to enjoy the series of vids with you putting this together - keep it up!
bassboylowg 1 month ago
Wow they sound great! even over the camera mic! Get a router on the corners and give them a really cool glossy finish :)
BurningArtsStudios 1 month ago
alilte over kill with the drill lol
Micheal153 1 month ago
You need to get a Zoom Q3HD.
carspeakerreviews 1 month ago
Wow that's sick. Any chance you can show how you wired them all up?
DubstepPromoter 1 month ago
I using a circle cutter and i use it with around 550 turns per minute
Bluemchenwiese1 1 month ago
Also well done look and sound wicked .. I wanna build some folded horn's could you help me get a cut specs up ?
dave412r 1 month ago
great work on the t-line highs, When are you going to get your engine management light checked :)
sparkzv1 1 month ago
Hay how do you cut the angles ? on the in side
dave412r 1 month ago
AMAZING WORK !
am building an HT my self and i used the sketchup for designing and cutlist plus for the wood cutting you seem to have used a sketchup plug in if you mention it in the description i would appreciate it .
good stuff !
ABLACKX 1 month ago
@ABLACKX thanks! i havent used a plugin lol, i just drew rectangles 2440mm x 1220mm and drew on each pannel and moved it around for best fit. then colour coded each box. time consuming but worth it for 100% accurate results 1st time!
barevids 1 month ago
@barevids Ok then i must recommend you the program cutlist plus which is awesome for wood or other materials .
And i must tell you that you should put words like diy and ht in the tags so that more people could see this!
and one more thing ,the other circle cutting jig doesn't allow wood to come out that's why smoke come out,so use an in and out motion .can't wait to see them in action and in finish (piano black) ? :P
ABLACKX 1 month ago
@barevids Fkin awesome work. Its just...the drivers look aesthetically shit
bigdima3 1 month ago
great :)
michals91 1 month ago
looks so good!
tehglu 1 month ago