hey i figured ide just buy the tekno conversion since im only 12 and am on a very low budget for this build. I bought the conversion kit, align 600XL, 3s lipo (5000mah), mama sidewinder, 58t spur, new improved clutch shoes, and an esc fan from integy... is this a good setup???
This is a great truck and set up you have and try cutting out the windshield and windows to move air through the truck that will dramaticly bring your temps down.
Yep ordered chassis, transmission and acessories. Front and rear end are the same. Good Luck and use blue loctite on everything. This is a fun build. I spent about 200 on parts not counting motor and esc.
does the mmm come with the wires in like the rest of the brushless setup like the flux blur or it`s do it your self then agin which is better in the erevo the mmm or flux
the MMM esc just comes with wires with the 6.5 mm connectors on the end of it so you have to put your own connectors on it going to the motor, but the MMM combo is already done for you
80mph is amazing. if you plan on running 100mph, you are either gunna have to change the motor and esc or go with a dual set-up. and lower your truck as much as possible. take the rear wing off so you dont do back flips...
HAHA!!!!!! dude really,watching the video seems slower then Really standing there and trying to hold the truck/etc straight,not so easy as it looks from videos.running anything 45mph+ is tough,but seems EASY in videos.
that was 70with 10th
ok wird my 1/16 e-revo vxl does 70 with 3cell 20s 1500 lipo with stock everything
MrJeremy313 1 year ago
What tires are you using? How do you keep them from exploding?
vulyone1 1 year ago
ciao che gomme sono hpi?
giacomopisani 2 years ago
1:12 to 1:18 jesum peats
pedroschanel 2 years ago
hey i figured ide just buy the tekno conversion since im only 12 and am on a very low budget for this build. I bought the conversion kit, align 600XL, 3s lipo (5000mah), mama sidewinder, 58t spur, new improved clutch shoes, and an esc fan from integy... is this a good setup???
MYNAMEISERIK88 2 years ago
This is a great truck and set up you have and try cutting out the windshield and windows to move air through the truck that will dramaticly bring your temps down.
cars05man1 2 years ago
dude! i have a 3.3! did u ust order the e-revo chassis and trany or what! i really want to convert! please post back soon!!!!!!!
MYNAMEISERIK88 2 years ago
Yep ordered chassis, transmission and acessories. Front and rear end are the same. Good Luck and use blue loctite on everything. This is a fun build. I spent about 200 on parts not counting motor and esc.
alvinsmith75 2 years ago
does the mmm come with the wires in like the rest of the brushless setup like the flux blur or it`s do it your self then agin which is better in the erevo the mmm or flux
mh509 2 years ago
the MMM esc just comes with wires with the 6.5 mm connectors on the end of it so you have to put your own connectors on it going to the motor, but the MMM combo is already done for you
shittybill93 2 years ago
80mph is amazing. if you plan on running 100mph, you are either gunna have to change the motor and esc or go with a dual set-up. and lower your truck as much as possible. take the rear wing off so you dont do back flips...
RevoRacer24 3 years ago
that doesnt really look like 70 mph but i geuss it is. also is that the 2650kv motor?
shittybill93 3 years ago
That is actually the 2200kv motor. As soon as I finish modifying some tires to hold up I am shooting for 100mph+
alvinsmith75 3 years ago
you should get some foam tires and run dual 2200kv motors that should be a 100+ mph machine, also could you tell me how heavy it is?
shittybill93 3 years ago
Dang that ESC fan is LOUD,how fricken fast is that thing blow? geese.
Raptorduder 3 years ago
HAHA!!!!!! dude really,watching the video seems slower then Really standing there and trying to hold the truck/etc straight,not so easy as it looks from videos.running anything 45mph+ is tough,but seems EASY in videos.
Raptorduder 3 years ago