Rustoleum Roller Paint Job Done On The Cheap $50 1985 Mustang Convertible 5.0

[Fittest224]

HEY YOU TUBE IF U LIKE THIS VIDEO MAKE SURE TO CHECK MINE OUT I SPRAYED MINE CHECK IT OUT ON MY PAGE

[cruzinloow]

That wing shoulda stayed on whatever you said you took it off of

[NubbyBuster]

Hey man i have a question. I recently just got my grandma's old car (2003 sentra) and it is a silver color, no rust or dents. I dont want to do air brush or anything because i do not have a compresser. I dont know what to exactly to do, but i want to color it all black. What would you do in this situation? Thanks

[Vacationtime247]

@NubbyBuster Check out my 4 minute video on how to do a rustoleum roller paint job for $50. Painting your car with a roller is very easy and it comes out looking awsome!

VT247

[7152pugs]

Great job man. It looks great

[herbieshirby]

I painted my car over 2 years ago using this method and it looks amazing!

[1blooddeath]

hey im almost done sanding my car... and ive spent like a week trying 2 sand it slowly and puddy areas needed and im preatty much done sanding and getting ready 2 primer with rustoleum, after i do that i buy the regular black? or gloss black? or high gloss black rustoleum i want a really glossy finish. what would i need so its a good nice finish not just 2 or 3 layers of paint?

if my question makes sense

[Vacationtime247]

@1blooddeath If you're ready to paint, I'd paint 4 coats of 75% Gloss Black Rustoleum Oil Based Enamel and 25% mineral spirits (paint thinner). People may say this is to thick, but it'll lay down a lot easier, orange peel will be minimal and it will look great when done. Make SURE to wait at least 10 - 12 hours between coats.

VT247

[madmax92gsx]

looks pretty good, did it keep the shine?

[Vacationtime247]

@madmax92gsx Still shined the day I sold the car. Held up even better than expected!

VT247

[truegame01]

i have tan/gold 2000 intrepid and will do this in about a week or so. just wanted to make sure i had the details down...wash it, wet it, sand it, buff it, add black primer, sand it, mix rustolium/mineral spirits, first coat, sand it, second coat, and so on? this might be totally wrong order or way to do it which is why i need u to correct it.

[SuperFrankiePR]

pretty blk

[vfIskullangel]

I did it to my 1996 Camaro RS and it held up pretty good but I've got a million scratches so ill be going over it again this weekend.

[MsCookie1129]

That's the most shity paint job I have ever seen u could have atleast used black primer in a fuckin spray paint can cheap ass

[MW2Rocks3839]

@MsCookie1129 lets see you do better oh wait i cant because the only 2 vids I see you have is of a dog chasing a flash light

[wajalama]

@MsCookie1129 First off, it's a single stage, so there's no need for primer, like the OP said. Second, this is only the first coat, read the damn description.

[twiztid1fiddy]

rustoleum paint like from walmart paint?

[Vacationtime247]

@twiztid1fiddy Yup, you can get the rustoleum from Walmart.  Rustoleum oil based enamel

VT247

[ajhgfhgjbjhbjhb]

Nice paint job dude

[mustanggt011]

thats a firebird spoiler lol hahha

[Vacationtime247]

@mustanggt011 Pretty good eye there! It is a Firebird spoiler!

VT247

[TheScrewable]

@Vacationtime247 0:25 u said thats what it was from

[noobydiablo]

@Vacationtime247 same wing i put on my olds lol. its on my profile

[chuy92]

clean 4-eye

[boutdempapers]

shit looks good...... bout to start my 350 tomorow. u should taken the wheels off and painted em black too

[wilson066]

This paint job is what they nigger rigged. You have and Obama sign hanging in your garage, now it all comes together, u are a cheap bastard that makes his lady hand paint the car in the driveway. wtf?

[408FishStick]

you should stencil MUSTANG in bold white letters on the middle of the front ( behind front wheel well) like the old mustangs have, i thoght it would look cool

[yamaharider4life08]

Do you need a100% minrarl spirit ?

[sladetucker]

i can still see the holes! lol nice paint job but......even some duct tape would have worked!! lol

[alexlabelette]

Damn im looking for painting my whole car with a foam roller and rustoleum ... i want more and more after watching videos like that .. seems like doin an awesome job !!

[TheTalonTsi]

wow that stuff really rolls on that smooth? doesnt have any bumps, and what are a clear coat, can you roll that on too? good job. not bad for a redneck puttin his painting supplies on an oven =D

[c4corvette1984]

Cruisin in my 5.0 withe the rag top down so my hair can blow ! Not to bad lookin you should do the whole car black .

[ButlerCollision]

interesting. i have never heard of that before. it looked good for being rolled on.

[skimbordfreak]

sounds kinda like andy from the office...

[gtobandit1]

I have seen some of your videos and all the projects look very very good. have you ever decided to do graphics with the paint on the cars???

[kezrotube]

i bet the wingo makes the carro go fastero

[Suidakkra]

That's right put the woman to work!!! Lol. Just kidding. Nice job man.

[Vacationtime247]

@Suidakkra Before she came out to help me paint the car she was in the kitchen MAKIN' ME A SANDWICH! : D

VT247

[TheScrewable]

@Vacationtime247 what kind of sandwich?

[LT1HILLINGHOE]

I was liking what I seen until you showed a obama biden poster. Frick and Frack liars as we like to call those two. Most just call them the worst two politiicans ever. Other than that the vid is ok.

[Vacationtime247]

What can I say. I had hope. But they've let me down and lost my vote. What 'change' have they accomplished? Nothing good.

VT247

[Vacationtime247]

Got 2 cars in the garage. One is a 1978 Ford Pinto all original with 29,500 miles. The other is a 1983 Mazda RX7 with 89,000 miles on it and a custom convertible job.

VT247

[rockerdude967]

@alexkills4fun

Obama can't fix anything because he is an ignorant socialist, and don't blame the work of Clinton on Bush like every other moron who endorses him.

[TAYLORsaysomethin]

any problems with streaking or chipping or anything?

[Vacationtime247]

Nope. The Rustoleum is a better paint than was on there from the factory. No streaking cause I rolled over it with a relatively thick coat of rustoleum.

VT247

[olecow3]

Hey, so did you apply a clear coat at all? Im planning on painting my 79 mustang like this, im just curious if the paint chipped at all or anything

[Vacationtime247]

@olecow3 Nope, no clear coat. It's just good old rustoleum mixed with mineral spirits. No Chips, no fade. Rustoleum is a single stage, no need for a primer either.

VT247

[CarTuner48]

lol nice, it doesn't look bad at all maybe it was because it was wet but, looks nice lmfao

[Neverthebroken1]

A poor mans fix it has me laughing yet its so awesome im mad i didnt think of that i love poor man ways for every thing its a way of life hats to you!! PS please make more videos for me to watch lol

[Vacationtime247]

@Neverthebroken1 What can I say? I'm a cheap bastard, lol.

VT247

[andyroo89]

I am doing the same paint job on my car and I was wanting to know what products/brands you used to polish the car and I protect the paint? Also in what order? like polished the paint first then applied the product to protect the paint or vice versa?

[Vacationtime247]

@andyroo89 Most any type of commercial wax works. I like to use wax that doesn't leave a lot of residue. Meguiar's polish is probably the best. But if your looking for a really nice paint job then you're best bet is to wet sand, buff and polish. If going this route, use Nortons Liquid Ice.

[ndubecky2494]

i thought you werent supposed to use oil based paints on cars?

[Vacationtime247]

Rustoleum is an enamel. Basically old school paint similar to what was used on cars years ago.

VT247

[gl75]

Great Job man,

i love it when i make something messy into a masterpiece and your getting there!

keep it going

[0VeilSide0]

I know you positioned the camera at the OSAMA BIDEN poster on purpose! LOL

[Vacationtime247]

Noticed that after I made the video...lol! I'm still waiting on 'CHANGE'. Comon' Obama, let's see it!

VT247

[Shaun589]

for $50, that actually looks pretty good. have you ever thought about claying, polishing, and waxing the red portion? (or maybe just wax it) i think it would really bring out the red since it looks a little faded/cloudy in some areas judging by the video. but anyways, i think it looks great.

[Vacationtime247]

Thanks! For the faded paint, go over it with 1500 grit and knock down the edges. Do the same thing as the lower section but with the top, use clear enamel / laquer.

VT247

[newelld13]

nice video, i'm going to be painting my conversion van today with this method. I'll be putting a vid up as well hopefully!

[Vacationtime247]

Hope your van comes out good! It's not that hard, just wear old clothes.  Post a Video Response up top.

VT247