um, im a noob to the rails, but i looked on your website and i saw measurements such as 12'' and stuff like that, so i took a ruler, and measured mine and it ended up being 6'' on a standard bushmaster upper with a solid A frame front sight post.... am i measuring it wrong, or do i just have a short hand guard?
A shaved FSB will fit it, so most after market low-profile blocks should work. It's not nearly as finicky as Larue rails when it comes to what blocks will fit.
With the 7.2 and 7.6 inch, is there any advantage of one over the other? I know the 7.6 needs a low-profile gas block, but other than that is there any real difference?
Unfortunately this will NOT fit a piston system. The rail is very small compared to the standard quad rail and does not allow enough room for the piston to operate. Thanks!
Well I emailed your Tech support a few weeks ago with technical specs of the piston kit. He told me it would clear. Should I send you the specs too? I want to make sure I don't waste my money.
Not true. You can use an Adams Arms piston kit on it. It works perfectly on my AR15. So the TRX might be able to accept the osprey piston kit. Hope this helps :)
Thanks bro!...but I decided on the Samson Evolution rails instead. Those will except piston convsersions and are very similar to the TRX....Also you can use the stock mil spec barrel nut.
No...the NEW TRX alpha allows you to use the standard barrel nut...the previous TRX was a proprietary barrel nut. The Samson Evo works off your stock barrel nut.
what kind of plate carrier is he wearing
bluntboyzAirsoft 2 weeks ago
What's the difference(s) between the Troy BattleRail MRF-RX and Troy BattleRail TRX? Would like to know before I buy the wrong one. Thanks!
HawaiiRebel 3 weeks ago
hows this compared to the omega rail?
rsxtypes06usdm 5 months ago
um, im a noob to the rails, but i looked on your website and i saw measurements such as 12'' and stuff like that, so i took a ruler, and measured mine and it ended up being 6'' on a standard bushmaster upper with a solid A frame front sight post.... am i measuring it wrong, or do i just have a short hand guard?
HeroHasGuns 7 months ago
forget the rail! I WANT THE MULTICAM TRUCK!
DESERTCRISIS 7 months ago
Im getting this or the YHM similar one.
YOWHATTHEHELLUP71 7 months ago
if i want to get this rail what would i have to do remove my FSB and get a gas block i just bought a RRA and would really like to have this put on?
jtmoney606 8 months ago
Will it clear a Stag model 8?
navyman8903 10 months ago
What size gas block do you need to install in order to accommodate the trx?
Gmaker202 1 year ago
@Gmaker202
A shaved FSB will fit it, so most after market low-profile blocks should work. It's not nearly as finicky as Larue rails when it comes to what blocks will fit.
opmike343 1 year ago
@Gmaker202 I can tell you a YHM Specter block will NOT fit underneath it. Most other lo pro ones will though
JSpradley123 1 year ago
With the 7.2 and 7.6 inch, is there any advantage of one over the other? I know the 7.6 needs a low-profile gas block, but other than that is there any real difference?
JSublime1 1 year ago
Im getting one fuck it bye bye MRF
miltnxc123 1 year ago
haha I want to know more about the Tactical Buick
cupcupculpable 1 year ago
does any know if this can fit the osprey piston kit?
clap5 1 year ago
@clap5
Unfortunately this will NOT fit a piston system. The rail is very small compared to the standard quad rail and does not allow enough room for the piston to operate. Thanks!
TroyIndustries 1 year ago
@TroyIndustries
Well I emailed your Tech support a few weeks ago with technical specs of the piston kit. He told me it would clear. Should I send you the specs too? I want to make sure I don't waste my money.
clap5 1 year ago
Comment removed
clarencemiller3 7 months ago
@clap5 I don't know of any slim profile tube stocks that can fit a piston system for any AR.
redmunkee 1 year ago
@clap5
Not true. You can use an Adams Arms piston kit on it. It works perfectly on my AR15. So the TRX might be able to accept the osprey piston kit. Hope this helps :)
clarencemiller3 7 months ago
@clarencemiller3
Thanks bro!...but I decided on the Samson Evolution rails instead. Those will except piston convsersions and are very similar to the TRX....Also you can use the stock mil spec barrel nut.
clap5 7 months ago
@clap5
for the TRX rail you can use a standard AR15 barrel nut. Not sure for the Samson Evo rail.
clarencemiller3 7 months ago
@clarencemiller3
No...the NEW TRX alpha allows you to use the standard barrel nut...the previous TRX was a proprietary barrel nut. The Samson Evo works off your stock barrel nut.
clap5 7 months ago
lol, ya nice truck.
nameless535 1 year ago
Nice rail and a cool paintjob on the truck in the background.
crewgadjy 2 years ago