Apexi WS2 cat back on Prelude

[mons757]

That shit sounds like ass bull shit

[Vanquished12]

@mons757 happy trolling

[HexagramMan]

i want a really low tone exhaust for a lude what should i look for?

[Vanquished12]

@HexagramMan Not really sure, it's been a long time since I was doing exhaust tone research. You might not want the WS2 muffler cause it's pretty quiet. The best advice I can give to you is to do youtube searches and see what you can find for tones on different ludes.

[choyleefutkid1]

@Vanquished12 Hey thanks for the vid, is there any muffler that is quiter then the apexi ws2

[Vanquished12]

@choyleefutkid1 When I was in the market for an exaust it was between this one and the HKS Sport exhaust. I think both of them are pretty quiet. I think Magnaflow's might be on the quiet side as well but I'm not 100% sure on that one. Thanks for watching.

[ericprodrift]

@choyleefutkid1 mugen twin loop is quiter

[choyleefutkid1]

@ericprodrift yeah but its expensive, i see shit expensive cuz i dont got a job lol :P

[ericprodrift]

@choyleefutkid1 i can get one for 100 euro inireland haha

[choyleefutkid1]

@ericprodrift really? must be fake over here in the U.S.A God Bless America, its like close to $1000 cuz real mugen isnt cheap.

[Skaterrocker842]

@choyleefutkid1 Look on the Prelude exhaust section of Andy's Warehouse (dot) com. I am doing exhaust research right now and looking up most of the exhaust that they sell.

[ryhawkeye]

how much apexi exhaust cost

[Vanquished12]

@ryhawkeye I think it was like $400 or so w/ shipping, but that was almost 3 years ago so I'm not sure how much they go for these days

[Vanquished12]

@riley2291 I got mine from HandA-Accessores . com I think they are getting limited on the colors available so you might have to get some of the pieces painted....not 100% sure about that though.

[hondarida5]

Sounds Clean!!Where did you get the exhaust from?

[Vanquished12]

@hondarida5 

[Vanquished12]

Thanks for the comment! I got my exhaust from OptionImports but that was quite a while ago, not sure if they still have the WS2 for the lude. Might be worth to check out.

[hondarida5]

Sounds Clean!!

[HondaGuy1212]

I love the sound, and an EBP Prelude, nice! You still have your Prelude?

[Vanquished12]

@HondaGuy1212 Thanks man. Yeah I sure do still have the lude. Has ~135k miles and planning on keeping her till the day she dies. It's a lot different since I took this vid. Full OEM lip kit, CF hood, tinted tails, Depo lights, etc... Good stuff! Thanks for watching mate.

[mizzprez1]

is this without the silencer attached?

[Vanquished12]

@mizzprez1 Nope, no silencer with the WS2. It's pretty quiet naturally.

[ericsyutubeaccount]

poot

[knallmeannn]

sexyyyy. raaaar!

[Niche79]

Wow just flippin through the vids tonight ive seen so many EBP ludes and I thought they were rare! haha I never see one around at all and any meet I attend Im normally the only one with one. Then again, your in NH and im in FL! haha

[Vanquished12]

@Niche79 Honda only made the EBP's in 2001 and only 2,500 were manufactured out of the 58,000 total 5th gen Preludes. So approximately out of every 23 Preludes one of them is going to be an EBP, so not too rare I guess but yeah I don't see any 5th gens up here in NH in general but on the forms they're by far the minority but not extremely rare. But when you're talking about imports in general 5th gens are rare and the EBPs are like SUPER rare amongst those haha. Thanks for the comment brother.

[kevinm1981]

sexy sounding

[tomaspimentel]

eww y glossy get flat paint =D pwns on tuners

[dirtbikemike69]

@tomaspimentel Rattle can flat looks like cheap rice shit.

[tomaspimentel]

yess... it does when u do it with spray paint from homedepot. go get it done at a legit paint place and tell me flat black doesnt look sexy

[tomaspimentel]

ahah fail xD you can see ur reflection on da bumper xD

[Vanquished12]

@tomaspimentel that's what glossy paint will do to you haha

[shawnster44]

MAN i don't know what to get.. either this or the Tanabe Hyper racing medallion. Both produce awesome low tones. AH!

[cletedawgthewalmart]

sound nice man

[uzaqq]

sounds great man good vid.. definately one of the best exhaust systems out!

[drakuons]

you could also show the sound on when car is runing because on idle the sound is diferet from that when you are driving .

[ruscfox]

Wow fantastic! I needed a new muffler on my 01 Prelude and I think I've found it. Thank you for sharing this video :)

[Vanquished12]

No problem-o. Glad it was useful to you!

[donnyinlakai561]

My WS2 seems much quieter than yours. I have a magnaflow high flow cat on mine. what else did you have when you took this video?

[Vanquished12]

@donnyinlakai561 hmm.. I can't quite remember but I'm pretty sure I just had this cat-back and a V2 intake (stock header) I think that was about it. I also shot this video while the exhaust was still being broken in. Hope that helps

[Thrash3rSkateRock]

that actually doesnt sound bad dude, I like it cuz its not fucking farty and rice, im buying a prelude and looking for some non gay rice sounding exhaust

[Vanquished12]

Yea dude that's why I got the WS2 exhaust it doesn't look like your typical rice exhaust and it doesn't sound like it either. Best of both worlds in my opinion.

[1sickprelude]

i have the same on my 93 lude love it and i dont scrape at all and i have it lowerd 1inch with tokico gas shocks

[Vanquished12]

damn man you're lucky. I scrape like mad and I'm lowered about 1.3" on Tein S-Tech's. But I do love the exhaust. Thanks for the comment

[civiccvcc2]

same exhaust I have on my accord with a H22 swap. love it!

[Vanquished12]

Nice! Yeah I love it to, definitely a non-ricer exhaust. :)

[sargeant002]

Nice setup bro - I can't wait to start working on my Si!!!

[atvman1000]

i dig the sound.nice exhaust.

[fluxcapacitor510]

I scrape all the time since i put the ws2 on, heard its a common problem.. You have any problems with the piping hanging low behind the catalytic?

[Vanquished12]

It's actually not as bad as I thought it would be. I have only scraped it once and I have gone over some nasty bumps with it, the only time I scrapped it was going up a pretty steep ramp that went up and flattened out very quickly and it scrapped a little bit (I haven't been to that car wash since). So out of the 3 months or whatever I've owned (living in New Hampshire aka not the flattest of states) it I have only scrapped it once I am pretty satisfied with it.

[fluxcapacitor510]

Damn thats not bad at all! I scrape an average sized speed bump.. I measured my clearance before and found i clear the WIDTH of a soda can by less than an inch.(keeping in mind i am lowered 1 1/4") Sounds like maybe your mounting hooks just line up better than mine or your not lowered?.. anyways, nice looking and sounding exhaust!

[Vanquished12]

Yeah I assume so. I tried to install it myself but the bolts were just melting off when I was hitting it with the PB blaster so I had my mechanic install the cat back for me. My ride is lowered about 1.3 inches and yeah it seems pretty good to me, I guess I was just lucky. Thanks for the complement on the exhaust, take it easy.

[INoelNoelNoel]

i live in the city and cops are ass holes their does this make to much sound .?? or does it only make a lot when u rpm it

[Vanquished12]

overall it's really not that loud at all, but if you keep the RPM's low it sounds stock.