what if you dont use a pedal, i just use the distortion on my head but wanna minimize the feedback, i dont wanna change my settings though, i like the tone i get once i start playing its just the feedback once i stop is pretty bad.
@raysocietysystem Im wondering the same thing i prefer not to use pedals and just plug straight in but when im not play my guitar and the volume is up i get all this hum and feedback
i have a question. i have a metal muff going into a noise suppressor on my pedal board. the noise gate dosn't mute the feed back coming from the metal muff pedal. should i connect it to the FX loop on my amp head?
@craigmcarthur1 i just switch from guitar/ metal mufff/ noisegate/ amp to guitar/ noisegate/ metal muff/ amp. I've been hearing a lot about how you are suppose to put a noise gate at the end of an pedal chain, well it's before my muff pedal and i get no feedback at all so that solves my problem. thanks
And im playing through a peavey 6505, do you think this could help clean up that hissing feedback that comes from the amp itself. I figured if i tried the 4 cable method it could get rid of that preamp humming.
my delay pedals tempo very faintly comes through my amp, like a clicking noise. Would this sort this out? and if so would it just be best at the end of the chain completely? Jake
I have a question. Does it only eliminate noise when there is no guitar being played or does it kind of "clean up" you actual guitar playing too. I was wondering because it's hard to tell in these videos (sound quality)
@baconbag i play out of a Peavey 6505+ and when you use the ns-2 on the lead channel i REALLY notice a difference of it cleaning up while your playing. especially when doing picking patterns. The peavey has a tendency to amplify all the little mute noises your palm will make. you can get away with it if you're amazing a palm muting, but with the ns-2 i think its a lot more forgiving in the really high gain spectrum.
wen i play sweet child o mine but i let the notes ring there is a horrid noise of all the notes chumbled 2gether wud the NS-2 fix it so there is no blurred noise please respond quickly
some people use two noise suppressors, i was just wondering why would someone do that. is it because the amp itself gives a lot of feedback without any pedals so u need one for the amp and one for the pedal? How does it work
i know this remove the noise when the OD is turned on the combo. i have a squier hss and it has not a good pickup, so i have a pretty loud noise on clean too. this will also remove, or only on OD??
If used incorrectly in can suck tone considerably. As with any pedal it can potentially colour your tone. SO use with caution and only buy if you have a real need for it. If you have a noisey setup it is worth looking at the other potential causes, pickup and amp quality and settings, cable quality, power suppy quality etc
Great vid! My amp, or something with my gear is very noisy, I think it's the calbe couse I have a chair with wheels on, so I've "driving" over them a couple times, do you think it's only couse the cables?
Yup damaged or poor quality cables can cause noise. Power quality power supply can cause issues aswell. Most likely cause is amp settings and the electronics of your guitar
Wow, that guitar looks great in that light. I haven't taken the pickguard off mine yet but this is inspiring. Also my new pickups don't have covers (cream neck and cream and black bridge). So it's a little less shiny.
If I get noise during my playing while my amp is on the highest overdrive setting (Insane - Spider IV 75 Watt) Will this pedal reduce that or is it something else causing that noise? Look at some of my videos you might be able to hear what im talking about, please comment or PM me back.
you really want to get rid off the noises and have more effects than you can handle? very simple, buy a gforce or prophecy rack and get a sinple pedal board to control it. go pro dude...all this peoples are creating tons of noises
I got a Crate GX10 120 watt Combo Amp and everytime I put it past 2 if gives horrible feedback but awsome gain and distortion.Would this pedal help take away that static sounding feedback without messing the gain or distortion?
I think I actually like the sound better without the noise gate. Without the gate there seem to be more dynamics present which adds an extra dimension. Guess it's a matter of taste though.
One question: I wanna buy this pedal and put all of my 'dirt' pedals in the chain of the NS. BUT I have a single coil Tele which also hums. Will it also get rid of the hum of my guitar? Or only of the pedals in the chain? Please awnser
Dude, in 1:07, When you finsh your part and try to mute your string, There is some kind of sound coming out befor it getting quiet! Is that your Delay effect ( Or maye Chorus ) or thats the Time NS-2 Nneeds to get ride of Noise and acts like Noise Gate ?????
Hey there. Thanks for the demo. Really cool.question. I use a Big Muff Bass on my 5string. So lots of distortion = lots of noise. Would this noise suppressor help? or is this pedal meant for just guitar? Thanks much in advance.PEACE
Hey man, i just bought one of these and i nee help on how to use the knobs and how to hook it up through my FX loop. Do i send it through the input output jacks on the pedal, or the send and return?
Two ways to use it. One is in front on the amp so Guitar -> Input NS-2 -> Output NS-2 -> Input of amplifier. The Send NS-2 -> in input of effects -> Outpur of effects -> NS-2 Return
hey i have a question i just bought mine yesterday and it wasnt takin away any of the quality and was taking away all the hssssss and feedback and stuff but i tried it again this morning and it took away some of the quality of only one of the distortions can u help me fix this?
Check the pickups are grounded and potted properly. Poor power supply to the pedals and the amplifier can coz unwanted noise. Hi Gain boosting pedal will always amplify any noise within your signal path. Better quality pedals, better quality cables, good power supply will all help and noise suppressor like the NS-2 can be used to help reduce the noise
I have a few pedals in the NS-2 Loop. So the NS-2 is plugged into the direct input of my amp. And the pedals I want to noise suppress are connected via the NS-2 send and return loop. That make sense?
hey bro nice video. my friend is letting me use his ns-2 but when i run straight from my guitar to my amp head it does really do anything for the feedback or hum. do i need to run it through my loop on my amp to get it to cut down on it. andalso is this pedal made to work like a gate and get rid of feed back or just hum.
If your trying to reduce the feedback and hum from your amp, your probably best to put it trhough the amps effects loop meaning its in effect between your pre amp and power amp. Putting it in front of your amp is more designed for elimiating noise created by other pedals
hey im using a Les Paul Ultra with its factory pickups through a Boss ML-2 Metalcore pedal into my Line 6 Spider IV an also a Peavy Valveking halfstack sometimes, the metalcore pedal really has insane hum an squel while im not even playing, but great tone, if i had the NS-2 pedal, would it cancel out the squel an noise during silent parts of a song? for example, im playing with my metalcore and then i just stop playing, will it make it silent? please give me info an help. thanks again.
All Along The Graveyard The Night Watchman Takes Us On An Instrumental Journey As We Listen For The Sounds Of His Guitar To Guide Our Way ....Inside...By Darrell Deese Im a guitar Player That No One Cares To Hear But Loves To Hate
i put it after the CS2 n den in b/w send n return i put my dist pedals n eq7n then output of ns2 to my modulation n time effects n den finally to amp....
I have a Fender Strat and a Fender 65R Amp. When I turn the amp on, (Bridge Pickup) There is a massive buzz, But when I turn it to (Bridge and Middle) There is no buzz. Would this pedal help?
Hi Adam, it sounds like you have a grounding problem with the bridge pickup. So either it isnt grounded properly or needs re potting. I would take the guitar to a guitar tech to have the electronics checked over before making any purchases.
fender strats have single coils so if you have the switch to just one coil then you'll have buzz
if you switch it to 2 pickups at one like brigde and middle it kindof acts as a humbucker and gets rid of some of the buzz but nothings works like a real humbucker
Just a question...I was looking into a Noise Supressor but had a question about how they worked. There's an amp at school that I use for Concert band, Jazz Band, and some other courses. It's a Fender Amp (M-80 Chorus I think it's called) with built in chorus and overdrive channels. Would the noise supressor do anything for built in distortion? Or does it only effect what's between your guitar and the amp? Thanks.
@Botdra no none that i can notice but i am running an esp ecplipse into a h&k so it has huge ammounts of sustain.the only thingi noticed was the pick attack seemed to be a little tighter.oh i have it in the effects loops now and it sounds the same as running it into the front end
@boogieou818 Perfect! I did see one demo comparing this to another Supressor pedal and I did hear some tone sucked out though...any problems for you with hi-gain?
none at all i mainly use the hi gain channels and sometimes a ts-9 as a boost and i cant notice any difference maybe those guys had their settings wrong
Nice one bro, I'm gonna go buy one for my Line 6 stack because with their Insane distortion with my Ibanez 7 string has some hella unwanted noise even with the built in gate it gets just above the threshold. I bet your helping Boss sell quite a few of these lol Thanks for that video, very well made. Nice set up too man, I need one of those Line 6 looper stations too :-)
In this video i think I am using a basic DC power brick. I currently use a Gig Rig Power Generator to power my Pro 14 and the I use the Pro 14 9v DC out to power 3 Gig Rig Power Distributors. This allows me to power each pedal individually
not quite, noise supressors reduce the level of the noise, ie. supress it; and noise gates don't let a signal through until it is above the level of the noise (effectivly removing it completely as the signal from the guitar should be alot higher than the noise, so when you play it drowns out the noise).
but most noise supressors have some sort of noise gate attatched them so in that respect they are the same
I am not diminishing -or trying to do so- your video. I find it to be a most delightful idea to post well-organized videos like you did (with text during the video, testing one pedal without the other and so forth). It's a tremendous step for someone who wants to find a ''personalized'' sound on his guitar.
But in the same time your replies are even better! I mean come on you must have noticed: ''haha. you're special''
hahahahaha I mean -call me crazy- but that's what I call ''hilarious'' man!
''God help the planet if you choose to reproduce'' I mean, I bet that's the best reply on youtube.!!
Also notice that you're wearing a Pink Floyd Tshirt, which can only be a good thing, especially when holding a guitar and having that stuff in front of you.
This comment has received too many negative votesshow
dats soooooo funny mannn... never heard nything funnier.. fine.. ur band kinda rocks dude.. but still, i just cant give up the fact ur video is still like shit..
I agree. Your being a noob doesnt alter anything. Judging by your poor diction and overall tone you are not the sharpest tool in the box. Combine that, with the fact your clearly a jackass and your opinion is rendered mute.
Any need for all those pedals ? you need practice
ggiul1256 2 weeks ago
is there any use for this pedal for acoustic guitars?
praisewiththestrings 3 weeks ago
HAWKE! Is that you?
UltraDaveDude 3 months ago
Did You notice tone loss using NS-2 ? Thanks!
Great vids !
RightBrainsMusic 4 months ago
Russell Brand? o.O
Scarecrow1302 5 months ago
holy fuck i want that guitar
jackfn1234 6 months ago
i love all you're pedals man! awesome
TheMetallicaMan666 6 months ago
what if you dont use a pedal, i just use the distortion on my head but wanna minimize the feedback, i dont wanna change my settings though, i like the tone i get once i start playing its just the feedback once i stop is pretty bad.
thanks.
raysocietysystem 6 months ago
@raysocietysystem Im wondering the same thing i prefer not to use pedals and just plug straight in but when im not play my guitar and the volume is up i get all this hum and feedback
hendrix1222 5 months ago
ISP Decimator is so much better though
vaibanez87 7 months ago
i have a question. i have a metal muff going into a noise suppressor on my pedal board. the noise gate dosn't mute the feed back coming from the metal muff pedal. should i connect it to the FX loop on my amp head?
ahpuchdro2 7 months ago
You cold try yes, it may not work. Feedback is probably more likely to be due t the settings on your Muff. Try rolling off the gain a little.
craigmcarthur1 7 months ago
@craigmcarthur1 i just switch from guitar/ metal mufff/ noisegate/ amp to guitar/ noisegate/ metal muff/ amp. I've been hearing a lot about how you are suppose to put a noise gate at the end of an pedal chain, well it's before my muff pedal and i get no feedback at all so that solves my problem. thanks
ahpuchdro2 7 months ago
@ahpuchdro2 plug into the noise suppressor first, then into your distortion. SHA!
kingurbane 5 months ago
@kingurbane listen to the the man, noise supp is first in line every time and if you have this get a compression sustain pedal
ingeniousblues 1 month ago
does it silence feedback?
carnivorecrusher 8 months ago
It can do if the correct settings are dialled in. It may affect the overall tone in this case however
craigmcarthur1 7 months ago
RUSSELL BRAND!
Himynameislan 8 months ago
So many effects man. Eric Clapton would have your head! Not that Eric Clapton is that relevant to this video or anything
SnollaSnax 9 months ago
looks like you have every pedal known to man right there
wussupmonkey 9 months ago
Very cool riff!
And im playing through a peavey 6505, do you think this could help clean up that hissing feedback that comes from the amp itself. I figured if i tried the 4 cable method it could get rid of that preamp humming.
Thanks in advance!
MichaelLozano12 10 months ago
my delay pedals tempo very faintly comes through my amp, like a clicking noise. Would this sort this out? and if so would it just be best at the end of the chain completely? Jake
jakeyboy2929 1 year ago
russel brand with short hair?
harvey288 1 year ago
omfg i hate ephiphones
RandyFoxKiller 1 year ago
@RandyFoxKiller Whats wrong with Epiphones?
xManicSubsidalx 11 months ago
@RandyFoxKiller Please post a link to see your Gibson.
TouchMyHandHoles 10 months ago
Great demo man.
And your song Adam's Apple by your band Vinyl Future kicks ass haha.
Keep the Music alive!
crow66693 1 year ago
Holy shit! That thing rules! Nice guitar though, the same as Chris from Less Than Jake :)
PunkRockCovers 1 year ago
is this pedal affect your tone? what setting should i have for it? i undestand if is to less i get the buzzing noise but what if is to much? thnx
Dust0fNation 1 year ago
zjeb
emil057 1 year ago
you kinda look like Russel Brand
Daver869 1 year ago
What is the pedal beside your Noise Supressor , the white with red letters
22HeroHeroine 1 year ago
@22HeroHeroine I believe its the Boss Compressor.
firewolf2462 11 months ago
I have a question. Does it only eliminate noise when there is no guitar being played or does it kind of "clean up" you actual guitar playing too. I was wondering because it's hard to tell in these videos (sound quality)
baconbag 1 year ago
Only when ur not playing
craigmcarthur1 1 year ago
@craigmcarthur1 does it suck tone?
ihaveaverybadcold 7 months ago
It can do depending on the settings dialled in
craigmcarthur1 7 months ago
@baconbag i play out of a Peavey 6505+ and when you use the ns-2 on the lead channel i REALLY notice a difference of it cleaning up while your playing. especially when doing picking patterns. The peavey has a tendency to amplify all the little mute noises your palm will make. you can get away with it if you're amazing a palm muting, but with the ns-2 i think its a lot more forgiving in the really high gain spectrum.
metalnorm555 9 months ago
If you don't buy an adaptor soon, all those batteries will be quite expenzive! :-)
MrSfoose 1 year ago
Everything runs off mains
craigmcarthur1 1 year ago
Where do you put it on your pedal chain order?
fattirevsbud 1 year ago
Depends what ur trying to do. I can go in the aps fx loop, I tend to run gain pedals thru its loop in front of the amp
craigmcarthur1 1 year ago
wen i play sweet child o mine but i let the notes ring there is a horrid noise of all the notes chumbled 2gether wud the NS-2 fix it so there is no blurred noise please respond quickly
guitargod891 1 year ago
some people use two noise suppressors, i was just wondering why would someone do that. is it because the amp itself gives a lot of feedback without any pedals so u need one for the amp and one for the pedal? How does it work
Valtchanovv 1 year ago
0:01 to skip the add
charleseladas 1 year ago
exelente pedal, man lo tengo es una masa....
perrorojometal 1 year ago
you suck
featherston16 1 year ago
such a beautiful guitar
DVGTS1 1 year ago
what in the ns2's effects loop?
sk8357 1 year ago
i know this remove the noise when the OD is turned on the combo. i have a squier hss and it has not a good pickup, so i have a pretty loud noise on clean too. this will also remove, or only on OD??
adamxp1524 1 year ago
I only need it for the efx loop to put my big muff and rat in. Will they sound the same or does it screw with them too much?
joshie4330 1 year ago
great vid great sound great guitar palyer and amazing guitar.....
maxsorridente 1 year ago
dude you need a board for all those pedals, maybe you have one, I don't know. Carrying all of those individually to a show must be a bitch!
SJP444 1 year ago 2
Yeh I've got a few pedal boards of different sizes, so when I go to a gig everything is pre wired and powered from DC
craigmcarthur1 1 year ago
Hi, I was thinking of buying this pedal. Does it suck a considerable amount of tone out of your guitar sound? And is this pedal easy to use?
iradj 1 year ago
If used incorrectly in can suck tone considerably. As with any pedal it can potentially colour your tone. SO use with caution and only buy if you have a real need for it. If you have a noisey setup it is worth looking at the other potential causes, pickup and amp quality and settings, cable quality, power suppy quality etc
craigmcarthur1 1 year ago
what a diffrence!
samick94 1 year ago
Great vid! My amp, or something with my gear is very noisy, I think it's the calbe couse I have a chair with wheels on, so I've "driving" over them a couple times, do you think it's only couse the cables?
robban97swe 1 year ago
Yup damaged or poor quality cables can cause noise. Power quality power supply can cause issues aswell. Most likely cause is amp settings and the electronics of your guitar
craigmcarthur1 1 year ago
@craigmcarthur1 Thanks for awnsering!!
robban97swe 1 year ago
whats the name of just this song ?
dannysamurai 1 year ago
Its in the video title and the video description
craigmcarthur1 1 year ago
Wow, that guitar looks great in that light. I haven't taken the pickguard off mine yet but this is inspiring. Also my new pickups don't have covers (cream neck and cream and black bridge). So it's a little less shiny.
GuillermoSmyser 1 year ago
Awesome demonstration and gear.
InspiredProphecy 1 year ago
it kills your tone at least a bit, doesnt it?
josemi21 1 year ago
0:01
DoubleBarrelGuitar 1 year ago
If I get noise during my playing while my amp is on the highest overdrive setting (Insane - Spider IV 75 Watt) Will this pedal reduce that or is it something else causing that noise? Look at some of my videos you might be able to hear what im talking about, please comment or PM me back.
TopshelfXPT700 1 year ago
you really want to get rid off the noises and have more effects than you can handle? very simple, buy a gforce or prophecy rack and get a sinple pedal board to control it. go pro dude...all this peoples are creating tons of noises
Mr0ro 1 year ago
Is this just a type of noise gate. Nice riff.
guitdude09 1 year ago
dude you got a shit load of pedals but still nice
emokidsinthecorner 1 year ago
i need that shit
BUFFW 1 year ago
would this cure all the noise problems i have with Eruption?
MeanGreenMovies 1 year ago
I got a Crate GX10 120 watt Combo Amp and everytime I put it past 2 if gives horrible feedback but awsome gain and distortion.Would this pedal help take away that static sounding feedback without messing the gain or distortion?
crow66693 1 year ago
i have a very heavy feedback problem with my amp but i want to keep the highs and the gain in, does it help if i buy this NG?
theflavasava2 1 year ago
I think I actually like the sound better without the noise gate. Without the gate there seem to be more dynamics present which adds an extra dimension. Guess it's a matter of taste though.
Solarnawg 1 year ago
I got a noisy amp...would this help?
edwardtang1977 1 year ago
Yup it might, work out what is causing the noise irst. Is it definitely the amp, or is it power supply, quality of cabling, guitar etc
craigmcarthur1 1 year ago
are u using NS2 at the end of your effect chain or as first pedal???
guiterockermanu 1 year ago
I use the ns-2 at the start and run all the drive pedals on my board thru its loop
craigmcarthur1 1 year ago
One question: I wanna buy this pedal and put all of my 'dirt' pedals in the chain of the NS. BUT I have a single coil Tele which also hums. Will it also get rid of the hum of my guitar? Or only of the pedals in the chain? Please awnser
Guido
MoonlightShadowlolz 1 year ago
fuck my life thts a hell lotta pedal.
ArthursChannel 1 year ago
thanks man this helped alot
FallenSldr 1 year ago
Comment removed
hamidlespaul 1 year ago
Dude, in 1:07, When you finsh your part and try to mute your string, There is some kind of sound coming out befor it getting quiet! Is that your Delay effect ( Or maye Chorus ) or thats the Time NS-2 Nneeds to get ride of Noise and acts like Noise Gate ?????
Nice video and well played ;)
hamidlespaul 1 year ago
Is it recommanded to use it when doing solo with sustain???
eticom1 1 year ago
not bad....is there any pedal that can emulate better than ns-2?
THEDEATHCOREMARSHALL 1 year ago
not video related but dude you look exactly like my friend ray, like its uncanny how much you look like him haha.
spiritofjosh 1 year ago
sweet riff :D
acuity67 1 year ago
Hey. Are there any other noise supressors than this one which are not too expensive. It ain't expensive but i want to compare it..
MeVazer 1 year ago
as for me, i don't have any pedal, then the NS-2 doesn't changes anything with my sound right?
rerean 1 year ago
Im guessing you have too much money.
Disasterpeice01 1 year ago
Hey there. Thanks for the demo. Really cool.question. I use a Big Muff Bass on my 5string. So lots of distortion = lots of noise. Would this noise suppressor help? or is this pedal meant for just guitar? Thanks much in advance.PEACE
patient1234 1 year ago
Hi,
My grip is noise of amp´s drive channel. I wonder if if will work too.
VelhosNovos 1 year ago
Would the Noise Suppressor work fine on a bass? I get some noises when I play sometimes, can be a pain. Especially when playing with the band.
Prof3ssrBrando 1 year ago
This has been flagged as spam show
Whats this pedal do anyway?????
Todd9141 1 year ago
Comment removed
Todd9141 1 year ago
great demo man.
i really need to get one along with about half of the shit you have. jesus man, your gonna start a structure fire!!!
haha.
thanks
legendofakira 1 year ago
Hey man, i just bought one of these and i nee help on how to use the knobs and how to hook it up through my FX loop. Do i send it through the input output jacks on the pedal, or the send and return?
GuitarRocks23455 1 year ago
Two ways to use it. One is in front on the amp so Guitar -> Input NS-2 -> Output NS-2 -> Input of amplifier. The Send NS-2 -> in input of effects -> Outpur of effects -> NS-2 Return
Or effects loop: Amp Send -> NS-2 input -> NS-2 output -> Amp Return
craigmcarthur1 1 year ago
@GuitarRocks23455 if you need a video of the effects loop i can make video becasue someone asked me the same question no you need a video?
posiedonpowertrio 1 year ago
@posiedonpowertrio Yeah that would be great, thanks man
GuitarRocks23455 1 year ago
not a pedal question! guitar! how was the set up on that when you got it? is it a good player
syncosync 1 year ago
I bought it from a bandmate who is a handy guitar tech so when I got it had an excellent setup.
craigmcarthur1 1 year ago
hey i have a question i just bought mine yesterday and it wasnt takin away any of the quality and was taking away all the hssssss and feedback and stuff but i tried it again this morning and it took away some of the quality of only one of the distortions can u help me fix this?
S2Cband 1 year ago
i like how you set up the pedals in a horse shoe shape
7stringkid 1 year ago
I think i need this, but can you tell just really good it is in reducing buzz, and is there any other way to reduce buzz?
Also, does the NS-2 colour the sound or just reduce noise?
ubad00d 1 year ago
See the answer about 3 comments below. Cheers
craigmcarthur1 1 year ago
Ok, thanks dood :D
ubad00d 1 year ago
my amp makes a really annoying buzzing noise when i have the distortion on would the boss ns-2 reduce the noise my amp makes?
JaredL19 1 year ago
Check the pickups are grounded and potted properly. Poor power supply to the pedals and the amplifier can coz unwanted noise. Hi Gain boosting pedal will always amplify any noise within your signal path. Better quality pedals, better quality cables, good power supply will all help and noise suppressor like the NS-2 can be used to help reduce the noise
craigmcarthur1 1 year ago
Do you have the ns2 plugged directly into your amp or at the end of you pedals?
kalebgriffin1993 1 year ago
I have a few pedals in the NS-2 Loop. So the NS-2 is plugged into the direct input of my amp. And the pedals I want to noise suppress are connected via the NS-2 send and return loop. That make sense?
craigmcarthur1 1 year ago
Yea man. Thanks a lot
kalebgriffin1993 1 year ago
Looked it up ..
Thanks !!
durarail 1 year ago
Hey .. Can a single NS 2 go through both the fx loop and the front of the amp simultaneously ?
durarail 2 years ago
Not to my knowledge
craigmcarthur1 2 years ago
Yes it can.
Look up boss ns-2 x connection on google.
MightyPwned 2 years ago
hey bro nice video. my friend is letting me use his ns-2 but when i run straight from my guitar to my amp head it does really do anything for the feedback or hum. do i need to run it through my loop on my amp to get it to cut down on it. andalso is this pedal made to work like a gate and get rid of feed back or just hum.
xXmeXx1000 2 years ago
If your trying to reduce the feedback and hum from your amp, your probably best to put it trhough the amps effects loop meaning its in effect between your pre amp and power amp. Putting it in front of your amp is more designed for elimiating noise created by other pedals
craigmcarthur1 2 years ago
alright dude thanx so much.
xXmeXx1000 2 years ago
hey im using a Les Paul Ultra with its factory pickups through a Boss ML-2 Metalcore pedal into my Line 6 Spider IV an also a Peavy Valveking halfstack sometimes, the metalcore pedal really has insane hum an squel while im not even playing, but great tone, if i had the NS-2 pedal, would it cancel out the squel an noise during silent parts of a song? for example, im playing with my metalcore and then i just stop playing, will it make it silent? please give me info an help. thanks again.
xaudiboyx 1 year ago
It can be used in this way yup. Need to be careul with the decay time tho so it doesnt colour your tone
craigmcarthur1 1 year ago
This comment has received too many negative votes show
what i have to do for play master of puppets?how i have to setting my amp and what effect?wich distortion ecc
SergioSlasher 2 years ago
nice collection there dude! ...would need a massive pedalboard hahaa.
what's the dl4 like?
NevvyC 2 years ago
I like the DL4, its versatile and having the looper is very handy
craigmcarthur1 2 years ago
This has been flagged as spam show
All Along The Graveyard The Night Watchman Takes Us On An Instrumental Journey As We Listen For The Sounds Of His Guitar To Guide Our Way ....Inside...By Darrell Deese Im a guitar Player That No One Cares To Hear But Loves To Hate
trixie10121 2 years ago
great effective little noise supressor
9graff9 2 years ago
I need one
erniesux 2 years ago
excelent video. no annoying talking, no bull. just show me how it works, great band to dude.
loketron 2 years ago 26
what is the order of putting the ns2 in the loop
i put it after the CS2 n den in b/w send n return i put my dist pedals n eq7n then output of ns2 to my modulation n time effects n den finally to amp....
is dat correct?
deathmetallica2nd 2 years ago
I have a Fender Strat and a Fender 65R Amp. When I turn the amp on, (Bridge Pickup) There is a massive buzz, But when I turn it to (Bridge and Middle) There is no buzz. Would this pedal help?
- Adam
drockadam6 2 years ago
Hi Adam, it sounds like you have a grounding problem with the bridge pickup. So either it isnt grounded properly or needs re potting. I would take the guitar to a guitar tech to have the electronics checked over before making any purchases.
craigmcarthur1 2 years ago
Alright then, Ill get that checked out!
Thanks,
- Adam
drockadam6 2 years ago
no most strats have mad feed back coming from the bridge pick up to answer your question Adam yes this pedal would help eliminate the buzz
naulty3500 2 years ago
fender strats have single coils so if you have the switch to just one coil then you'll have buzz
if you switch it to 2 pickups at one like brigde and middle it kindof acts as a humbucker and gets rid of some of the buzz but nothings works like a real humbucker
crackanese23 2 years ago
Hey Adam, I have the same problem with the same set up. (fender strat, fender 65R) did you find out what the problem was? Thanks.
1222VALENTINO 1 year ago
Gracias por tu video, amigo.
franRW 2 years ago
Just a question...I was looking into a Noise Supressor but had a question about how they worked. There's an amp at school that I use for Concert band, Jazz Band, and some other courses. It's a Fender Amp (M-80 Chorus I think it's called) with built in chorus and overdrive channels. Would the noise supressor do anything for built in distortion? Or does it only effect what's between your guitar and the amp? Thanks.
Botdra 2 years ago
It is possible to put the ns-2 in your amps effects loop to elimate noise from the amplifiers pre amp section
craigmcarthur1 2 years ago
Ah, that's what I thought. Thank you though!!
Botdra 2 years ago
i run mine straight into the front of the amp and it works fine and it doesnt suck tone at all
boogieou818 2 years ago
Do you ever have problems with it screwing with your sustain?
Botdra 2 years ago
@Botdra no none that i can notice but i am running an esp ecplipse into a h&k so it has huge ammounts of sustain.the only thingi noticed was the pick attack seemed to be a little tighter.oh i have it in the effects loops now and it sounds the same as running it into the front end
boogieou818 2 years ago
@boogieou818 Perfect! I did see one demo comparing this to another Supressor pedal and I did hear some tone sucked out though...any problems for you with hi-gain?
Botdra 2 years ago
none at all i mainly use the hi gain channels and sometimes a ts-9 as a boost and i cant notice any difference maybe those guys had their settings wrong
boogieou818 2 years ago
@boogieou818 Perfect! Thank you so much for your help!
Botdra 2 years ago
I believe you may have just sold me on the pedal. From the sound of it, it does exactly what I'm looking for.
PlatypusVomit 2 years ago
I like your style Dude!!!
leomanism 2 years ago
what the fuck this isnt hardcore????
this stinks omg
sidbergs 2 years ago
oh. my. god. you have a shitload of pedals.
metklok 2 years ago
Nice one bro, I'm gonna go buy one for my Line 6 stack because with their Insane distortion with my Ibanez 7 string has some hella unwanted noise even with the built in gate it gets just above the threshold. I bet your helping Boss sell quite a few of these lol Thanks for that video, very well made. Nice set up too man, I need one of those Line 6 looper stations too :-)
nlovett420 2 years ago
lol u use a line 6 head as a stack?
Xxsynysterg8sxX 2 years ago
very well made video
gaud2029 2 years ago
lympheneas
....
is sprung off his ass on your dick and balls
SummersEnd805 2 years ago
What?
craigmcarthur1 2 years ago
So it works on the principal of a threshhold noise level? Nice demo.
andros1984 2 years ago
More or less. Similar to frequency limiting
craigmcarthur1 2 years ago
What are you using to power your pedals?
Deneteus 2 years ago
In this video i think I am using a basic DC power brick. I currently use a Gig Rig Power Generator to power my Pro 14 and the I use the Pro 14 9v DC out to power 3 Gig Rig Power Distributors. This allows me to power each pedal individually
craigmcarthur1 2 years ago
jesus i need to get one of them!
yngwieshred11 2 years ago
i don't think Jesus is handing out pedals man...probably should look at guitar center instead.
JustinRasbach 2 years ago
Should i get the boss ns-2 or the isp decimator?
kalebgriffin1993 2 years ago
ISP i would say
craigmcarthur1 2 years ago
Alright man, thanks.
kalebgriffin1993 2 years ago
So Noise Suppressor is the same as Noise Gate.
Sry for stupid question but i dont know about that alot =)
I got noise gate in my Digitech RP-150 and i dont know if this is the same. Does that clean your sound to?
zupanman23 2 years ago
Yup more or less the same thing. It will allow you to reduce or limit the amount of hiss or background noise caused by the effects your using.
craigmcarthur1 2 years ago
not quite, noise supressors reduce the level of the noise, ie. supress it; and noise gates don't let a signal through until it is above the level of the noise (effectivly removing it completely as the signal from the guitar should be alot higher than the noise, so when you play it drowns out the noise).
but most noise supressors have some sort of noise gate attatched them so in that respect they are the same
masterboi31 2 years ago
I am not diminishing -or trying to do so- your video. I find it to be a most delightful idea to post well-organized videos like you did (with text during the video, testing one pedal without the other and so forth). It's a tremendous step for someone who wants to find a ''personalized'' sound on his guitar.
But in the same time your replies are even better! I mean come on you must have noticed: ''haha. you're special''
hahahahaha I mean -call me crazy- but that's what I call ''hilarious'' man!
lympheneas 2 years ago
Great video. But most importantly: your replies!
''God help the planet if you choose to reproduce'' I mean, I bet that's the best reply on youtube.!!
Also notice that you're wearing a Pink Floyd Tshirt, which can only be a good thing, especially when holding a guitar and having that stuff in front of you.
Very good mate! Very very good!
lympheneas 2 years ago
Thanks
craigmcarthur1 2 years ago
why dont we all get along
edge299 2 years ago
This comment has received too many negative votes show
mind ur own business u motherfucker.. dont add to the situation.. or u want me to fuck u up as well?
gawamarabunta 2 years ago
Haha, you are special
craigmcarthur1 2 years ago
This comment has received too many negative votes show
dats soooooo funny mannn... never heard nything funnier.. fine.. ur band kinda rocks dude.. but still, i just cant give up the fact ur video is still like shit..
gawamarabunta 2 years ago
shut the fuck up you slant eyed cunt. Hes much better than you on guitar you fat shit
99drunkenmknkey99 2 years ago
hello there... Do you know if the gt8 has the noise suppressor built in?! thank u?!
cosimoriccio 2 years ago
Yes it does
craigmcarthur1 2 years ago
wow, that noise suppressor helps a ton, completely eliminated your buzz without taking away from your tone, nicee vid man.
KatastropheFS 2 years ago
This has been flagged as spam show
gosh..stop it man.. u talk like god..
render mute diction bullshit.. yeah yeah..sum nice english class ur having~
yeah jackass.. yeahh.. u n ur stupid nothing-significant video.. u stupid piece of shit.. fuck ur own mom will u~
gawamarabunta 2 years ago
Haha. God help the planet if you choose to reproduce.
craigmcarthur1 2 years ago
well, me bein a noob doesnt change the fact that ur videos still suck~
gawamarabunta 2 years ago
I agree. Your being a noob doesnt alter anything. Judging by your poor diction and overall tone you are not the sharpest tool in the box. Combine that, with the fact your clearly a jackass and your opinion is rendered mute.
craigmcarthur1 2 years ago