Added: 3 years ago
From: miltonautosales
Views: 90,335
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (130)

Sign In or Sign Up now to post a comment!
  • this truck is amazing!

  • Truck has been off road everybody look at the exhaust tubing stained brown I've owned dozens of lifted trucks that was spotless underneath and the exhaust tubing was stained

  • Comment removed

  • pavement princess

  • lol ice cold AC my ass if he had the other light turned on i'd believe him, but he had setting for outside air. Recirculating air makes it ice cold

  • @infringinator You must not have noticed that it was middle of January and I had on a fleece. Recirculate would not have made it any colder it was like 35 degrees outside!! Thanks for your expert opinion though

  • @miltonautosales we were both wrong and now im going to give the expert opinion because I looked in my owners manual. The A/C button is the one with the snow flake symbol. You use that button for A/C. We had it set to the vents being open and thats mainly used for heat. Although I got ice cold air, I didnt have the air compressor running to make A/C...This is a badass truck but I still win because it wont officially be ice cold air unless the A/C is actually activated. Im an amateur lol

  • @infringinator my ac is ice cold even when its not on recirculate so dunno whats wrong with your car.

  • @slapoutz I wasnt using the AC the right way. It sucks spending $40,000 and not knowing all the buttons

  • @infringinator i know all the buttons and use recirculate but it still can be ice cold when its not on recirculate.

    what i accidentally leave my recirculate off my ac will make me freezing even in 90 degree weather.

  • @slapoutz well its 10 degrees so Im using heat!

  • @infringinator lol my heater also makes me hot and even when its 20 degrees here in AL after a while of being in the toaster i have to turn the fan on. and thats in cold weather =P.

    also i really dont understand paying that much and not using the truck for what its made for lol. when i get a truck its gonna get beaten. just like my car does haha. got so many dents and scratches (specially on the back bumper) from dropping crap on it and whatnot.

  • id call it a dent....

  • just wondering if you guys still remember how much lift was on the truck? im looking at one the same year and everything but i cant tell how tall it is in the pictures.

  • is this sold and where is it located and how much?

  • @SATX704 I am sorry but this truck sold 2 years ago.

  • im in love

  • What does the z71 package come with?

  • @XJOJO411 Skid plates and off road suspension

  • @miltonautosales is the off road suspension just a little lift or something?

  • How high is the lift???

    And also the size of tires and rims??

    If u can answer that I'd appreciate it thnx

  • milton, TN?

  • @TheMstrmuse1 Milton Ga

  • take that body lift off, too high

  • how much was this lift.?

  • @TheHondaryder17 We bought this truck already lifted

  • @deepsr yeah you do to pull out the other trucks lol

  • this video is 2 years old. It's sold!

  • How much?

  • this truck has a 2in body lift in it...so id say its a 6in lift. 

  • How tall is the lift? please let me know

  • do you have a link to your auctions cause i couldnt find them

  • Man you get the greatest trucks... didn't you have the Really Nice Silver Dodge like 99'ish with the 10" lift?

  • @RoGQuizzno Thanks!! Yeah I had the 99 Dodge!! That thing was HUGE!!

  • @miltonautosales Correction,,,It was a 2001

  • sorry if i seem to be asking the same question that everyone else is asking but i just sat her at home looked on ebay and on google and yahoo in search for those pacer rims please let me know what type of rims those are and what exact size tire that was ? id really appreciate it and so would everyone else... seems everyone keeps asking the same question... and i have the exact same truck ... pretty excited to get those tires and rims. shit ill pound pavement any day lol .

  • @caliwood909 No sweat. I sold this truck in Jan 2009. If I could remember the exact size I would share it with you. Probably 35x12.50x16 but I am not positive. Try a local wheel and tire shop to find out what size you should put on your truck! Take it easy and thanks for viewing the video!

  • very nice truck! What size lift and tires? Thanks man

  • @NICK00065 I think it was either a 6 or 8 inch lift. The tires were 35's I believe

  • Brings back old memories of my 99.... Great video...

  • sold? i can't find it on ebay lol

  • @TraxxasTM33 that is because it was old in January of 2009

  • sexy

  • The tow hooks are upside down because of the gay body lift. But i must say that this truck is a nice pavement pounder.

  • hey what are the wheels called? who are they made by?

  • What happen to the tow hooks?

  • @ModXowned What do you mean? The tow hooks are there and they are fine.

  • @miltonautosales I guess there suppose to be bent like that for that truck lol mine are straight

  • @ModXowned it's a chevy, you dont need tow hooks...

  • @Deepsr You need tow hooks to pull out the Fords!

  • The shaking u had was because its a fab tech lift...

    

  • @Bigtrystan Wrong,,changed the tires and it corrected it. A Fabtech lift does not cause shaking if installed properly.

  • so how much did you sell it for? and where is the test drive video??

  • @xPolarGamingx Watch the video again,,I just added a link within the lower right corner of the video that links you to the test drive video

  • Omg i love this truck its so nice, getting me one just like it soon

  • size lift?

    size tires?

  • how many mpg would u get in that?

  • its seen mud... just been cleaned after.

  • ok fabtech is good but rubicon express is so much better. And body lifts are junk

  • monster HA

  • @superduty25073 Made Ya Look! HA HA HA HA HA HA HA HA HA HA HA!! and HA!

  • Oh yeah,,,and 39k other viewers!

  • i would take that mudding till the tires fall off if i had a truck like that...... oh wait i do haha just a smaller lift and a 6.2. liter

  • IF YOU DONT TAKE IT OFFROAD THEN YOUR PUSSY SURE ITS A NICE TRUCK BUT THATS A WASTE IF YOU DONT TAKE IT MUDDIN

  • what size lift does that have on it ??? i just bought an 01 just like it if i put a 4in lift would it sit that high?? thanks

  • i need a truck like that

  • It's a 6 inch fabtech on 285/75/16 which are equivalent to like 32.8", and a good brand of lift especially for ifs trucks is BDS

  • it 2 bad it a chev

  • do you find alot of trucks like that cuz if you do let me know

  • nice beadlocks

  • its a bad thing you guys arnt located in idaho cause you seem to have the trucks im looking for. 3 months from now im gonna start looking for a bigger truck. s10 just aint doin it for me haha

  • were are you located at and how much is that truck

  • Atlanta Ga,,,,it sold 11 months ago

  • dammnnnnnn nice

  • this is a nice truck.. im looking to get something like this when i get back from Iraq

  • i agree i would put that thing through her paces on the hills behind my house

  • the proper way to keep it clean would be to put fender gap guards on, come over to gwinnett and i'll show you a lifted truck that could do something in the mud, i like the truck don't get me wrong but it's not even geared for offroad thats a pavement pounder, good luck on the sale.

  • This truck sold 10 months ago after being online for only 4 hours. Thanks for invite however.

  • how wide are those tires

  • still a nice truck just figured if you do al of business in saling lifted trucks than you might want to know a thing or two about them.

  • I do not understand your comment. The grammar is horrible. If you want to take a stab at me, at least know how to speak!

  • nice truck

  • the brackets that are labeled fabtech are fabtech tbar drop brackets the actual torsion bar crossmember is factory the fabtech brackets just lower it. and fabtech is an OK lift but not very desriable if you are looking for top of the line as it only drops the front suspension 4" while lifting it 6" which creates bad angles on the front suspension a good lift would keep the angles in stock position making it ride smoother and cause less wear and tear on ball joints,tie rod ends etc..

  • A year later and the new owner still loves how it rides.

  • @miltonautosales

    Umm, he is selling it though. So I'm not too sure if he loved it THAT much...

  • Comment removed

  • @ScoobyBaseball probably because he bought something he couldn't really afford

  • probably because he bought something he could not afford

  • lol lets be honest here man you really don't know much about lifted trucks right? you may specialize in selling them but you don't specialize in knowing about them. first off those things you refer to as "long and short arm" would be known as the torsion bars and compressions struts. the tbars are the springs which hold up the front of the trucks suspension the compression struts reinforce the front suspension as it flexes and the "fabtech crossmember" is not a fabtech crossmember at all

  • I had my first lifted truck 20 years ago,,,how bout you? I never claimed to be an expert, but I am sure that I have forgotten more about lifted trucks than you have learned

  • I never said the angles on the front suspension were horrible enough to make it ride bad i said they weren't in stock position :) meaning they will cause more wear on tie rods,ball joints,idler/pitman etc. you owned your first lifted truck 20 years ago? i own my lifted truck RIGHT NOW not to mention i install lift kits as side work. To put things into perspective I'm 6' tall and i can walk under my mirror :)

  • and the comment wasn't a stab at you it was to educate you :) oh and i never portrayed myself as an English major either but you learned a thing or two from my comment haha. you've forgotten more about lifted trucks than i have learned? hmm that would make you a lift expert that forgot alot of shit. you would have to have amnesia to forget as much as i know. "long arms short arms" lol wtf did that come from? was it just because one of the bars were longer than the other? HAHAHAHAHAHAHAHAHAHA

  • wow looks amazing, how much did u sell it for?

  • absolutely amazing truck, shouldve been an easy sell :)

  • only a 5.3l that the only thing thats bad about the truck

  • is it still for sale?

  • Sold it 10 months ago...sorry

  • Wow! What an intelligent comment! Amazing you can call me an idiot without ever meeting me. You must be a genius

  • ur a fucking faggot...do you wanna buy a muddy ass truck or something? shut the fuck up bitch how you gonna talk shit about someone cleaning a truck..people will talk shit about anything u prolly drive a 85 isuzu 2 wd u fuckin hater

  • i would but more sized tires

  • "lets test the heater out instead....... wow ice cold" haha 9:22

  • klololololol

  • i think he likes the truck ;)

  • lolololol

  • r u shure u didnt just buy a brand ne truck and try 2 sell it cuz u woulr have 2 do alot of work on it 2 make it that clean but nice truck anyway!

  • i have an 1996 chevrolet Tahoe. I would like to put a big lift kit on it but not too big, 6in or so. what type of lift should I use andhow should I do it?

  • I have the same model truck and My truck is twice as high and has a 12" bulletproof suspension lift , fabtech might be a great name in racing but doesn't give u the same product as their race trucks , bulletproof suspension is way better in my opinion , better quality metal and way more stable and also offers the dual shock system , u should check Em out

  • spray in bedliner!

  • but 285/75/16 are the same of 31/12,5/15 as tires and wheels

  • no u got the rims wrong they r both 16 inch rim and 285;s r closer to a 33 inch tire

  • that tire size is 33X11.50R16

  • is it sold how much

  • Monster truck??? WTF are those 33" tires, maybe?.. lmao.

    The vibration is the busted shock on the drivers front. You looked right at it. 4:37. It's not just a screwed up boot. the body of the shock is not pointed at the end of the shaft.

    If you want a lifted truck there's only one right way, Solid axle. All of these shitty independent front lifts are a major headache. It's not that hard to convert, and it's a LOT cheaper.

  • VERY TRUE

  • what kinda of rims are those and how big are they? like 16inch or some?

  • that has to be a 12 inch lift

  • wow. 1500. gas. IFS. what else can be wrong lol, nice truck though.

  • it is! haha yeah I just wanted a truck I could afford...and i like the raised look. It does need exhaust though...its really quiet right now

  • looks like a street hugger to me

  • weak ass exhaust lol

  • They should put some Straight Pipes, Headers, and Cats.

  • put 38in tires and ill buy it

  • I bought this one! Thank you guys it's awesome

  • What size lift is on it?

  • 9 inches i think. It's either 6 or 9 they said.

  • NIce. I didn't stay and watch the entire thing. I am about to be getting a 1500 so I am trying to find shit and get ready for a shopping spree. Lol

  • it aint a six lol

  • do you mind if I suggest something to film in your videos?

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more