@fishblade2 its good for all guns in my experience. hoppes number 9 plus is really the best but they dont make it anymore so if you can find it grab it
I use break cleaner, let it evaporate and then use Ballistol. When I had a stainless gun I just threw the barrel and the cylinder in soapy water followed by Ballistol again.
@TheDarkVII yeah you get alot of sexual vocabulary boosts in this field. nipples. nipple picks. nipple wrenches. ram rods. barrel plugs. balls. ball rammers. lube. thats just off the top of my head. there's probably more.
@cuntwafer That is way funny, and way true. I grease my balls so they go down the barrell smoother and to avoid chain fire.. I also used an 1861 colt till I wore it out and rebuilt it. Just goes to show that making your balls blast can be rough over time.
1) Remove the cylinder from the gun, remove all of the nipples. 2) Soak the cylinder in some warm water. 3) Flush the powder out from the open nipple hole. Get out as much powder as you can.
4) try either:
A) pressureized air, (over 30 PSI) you may be able to simply blow the ball out from the nipple hole using an air nozzle.
or
B) Try gently tapping out the ball from the back (Nipple) end. Use a stout piece of wooden dowel rod.
hey friend, i need to know how to take out a loaded shot without firing it, do you know? i dont wanna fuck with it and blow my hand and more important my gun apart
any ideas on how to get it to seperate easier i just bought one at a yard sale today it was a kit that got half way put together and never finished. couldnt pass it up only paied 2 dollars for it. yes two not twenty. but ya i was just gonna shine it up and put it on the fire place but i got lookin at it and its in really good shape i just cant get it to seperate and i dont want to use a cleaner that will ruin it is w-d 40 ok
@andrew0901280 wd40 is excellent for it but if you dont want to use it then your other options could be this thing called chemtool. it breaks up anything no matter how bad it is or just really hot soapy watter. but yeah wd40 and some patience will probably work. carburator cleaner, or brake cleaner works. even starting fluid for a diesel will work.
Excellent instructional - thanks man
acrooney 1 month ago
You Remind Me Of WOLVERINE
bobcrawman34 6 months ago
Things I learned:
1. The dude has a rockin' ponytail.
2. I won't clean my pistol like a scrub anymore.
3. Used Fabric Softener sheets are good substitutes for cleaning patches.
itachi1303 6 months ago
is butches boreshine good for cleaning all guns or would be something more recommended for black powder cleaning?
fishblade2 7 months ago
@fishblade2 its good for all guns in my experience. hoppes number 9 plus is really the best but they dont make it anymore so if you can find it grab it
cuntwafer 7 months ago
Love the idea about using the ram to get a well shot and dirty barrell off the frame on a colt, is brilliant thanks. great vid.
lenthesniper 8 months ago
I use break cleaner, let it evaporate and then use Ballistol. When I had a stainless gun I just threw the barrel and the cylinder in soapy water followed by Ballistol again.
pim1234 8 months ago
"Flush the powder out from the open nipple hole"...what is this...the JOY OF SEX?
TheDarkVII 1 year ago
@TheDarkVII yeah you get alot of sexual vocabulary boosts in this field. nipples. nipple picks. nipple wrenches. ram rods. barrel plugs. balls. ball rammers. lube. thats just off the top of my head. there's probably more.
cuntwafer 1 year ago 6
@cuntwafer LMAO that almost turned me on a little bit...just a little...
TheDarkVII 1 year ago
@cuntwafer u forgot cock
bronson123411 10 months ago
@cuntwafer Don't forget cock. Lots of cock.
itachi1303 6 months ago
@cuntwafer That is way funny, and way true. I grease my balls so they go down the barrell smoother and to avoid chain fire.. I also used an 1861 colt till I wore it out and rebuilt it. Just goes to show that making your balls blast can be rough over time.
1966Daywalker 2 months ago
Removing a loaded ball, without firing it out.
1) Remove the cylinder from the gun, remove all of the nipples. 2) Soak the cylinder in some warm water. 3) Flush the powder out from the open nipple hole. Get out as much powder as you can.
4) try either:
A) pressureized air, (over 30 PSI) you may be able to simply blow the ball out from the nipple hole using an air nozzle.
or
B) Try gently tapping out the ball from the back (Nipple) end. Use a stout piece of wooden dowel rod.
trainguy1218 1 year ago
hey friend, i need to know how to take out a loaded shot without firing it, do you know? i dont wanna fuck with it and blow my hand and more important my gun apart
darkshadow916 1 year ago
i take all apart, screws, nipples and everything. so much fun and you know its clean inside and out.
glynamus 1 year ago
ok thanks for the tip
andrew0901280 1 year ago
any ideas on how to get it to seperate easier i just bought one at a yard sale today it was a kit that got half way put together and never finished. couldnt pass it up only paied 2 dollars for it. yes two not twenty. but ya i was just gonna shine it up and put it on the fire place but i got lookin at it and its in really good shape i just cant get it to seperate and i dont want to use a cleaner that will ruin it is w-d 40 ok
andrew0901280 1 year ago
@andrew0901280 wd40 is excellent for it but if you dont want to use it then your other options could be this thing called chemtool. it breaks up anything no matter how bad it is or just really hot soapy watter. but yeah wd40 and some patience will probably work. carburator cleaner, or brake cleaner works. even starting fluid for a diesel will work.
cuntwafer 1 year ago