Pulsing Hydrogen Fuel Cell while Charging Battery (OU)

[Abrec66]

Dear Sir Hoax! Could you give out the plan of the setup you shown? Coil details and so on? I'd like to to repeat it with some another load instead hho generator. Could you?

Thank you

[MrAnguswangus]

Excellent vid! It does so much already but the coil could also turn a wheel...lol.

[capacitor70]

Same is in my mind doing it soon. Have you seen Danial dingle cell, it requires battery connection for few minutes after that it gives electricity back and produce gas. It looks same concept....Tesla switch is basic for all over unity device, It breaks the balance of nature to get oscillation (work done)

[TheHermeticAlchemist]

did you charge the battery with a battery charger? plugged into the wall? or how are you charging the battery?

[metalpresstv]

I'm a big fan however I am fearful your getting power from the grid coming in from your pulse meters power line. If you show one amp of power going to your transistors- kinda hard to read as its pulsing.. I would imagine that is where your charge is coming from considering your not in shamanic frequency's. Your pulse charge is coming from the meter and not the battery's power right?

[5tevef]

This is cool if it's real. I have to wonder when your handle is sirHOAX. You couldn't hook this up to my car could you?

[FormalScience]

Excellent!!

[magneticjem]

SWEET !

[prototype9000]

stanley meye and tesla pulsed the electrcity and 2 differrent waveforms at 2 different frequencys using a mag amp if i ever get one im definatly going to try

[flipster12000]

Nice resonant configuration. Did you wrap the bifilar coil around a ferrite rod? if not, that is what is missing. also when you get done with your Lawton circuit, try to get resonance with several octaves/harmonics. Multiple or compound resonance might be the key that everyone is missing.

[10987rk]

how the heck do you know where to plug everything in and what you need to make all this..electronics can be very confusing for a blonde guy

[ashtweth]

Your using high voltage spikes (Bedini effect) to condition the batteries and create dendrite growths (self charging effect) on lead acid cathode, you absolutely RAWK man, Dam ..can you please email me how you did this, i can explain more, about how the spike bat tests are done. AWESOME WORK Man, i support open sourced engineers and am part of a non profit org panacea-bocaf dot org you deserve GRANTS

[tree6014]

So, was that a closed loop (eg the battery was the only power source)? Or, was it connected to another source?

[haneyht]

Sir Hoax I have been looking for people who have a working myers system and I hope you can help me I am building a system to run a lawn mower. Could you help me with the circuitry. This is the first time i have posted a response to a video. So I'm not sure how this is supposed to work anything you could provide would be nice.

Thanks

[0ddba11s]

You can now buy chargers to recharge standard dry cell batteries many times with pulsing.

[0ddba11s]

However your meter will see a charging current rise but this is a pulse, were as the current consumed to drive the CCT is continuous.

So the question is did your battery lose charge over 2 hours or gain?

[0ddba11s]

If you look at the Dave Lawton D14 plans the last page shows a bridge rectifier and 2 electrolytic caps connected to a 10W bulb.

He claims at resonance he gets a brighter bulb and the cell and electronics runs colder. (Cold electricity) you may have gone one stage farther to charge the original battery.

[sirHOAX]

Building a LAWTON Circuit as we speak. Should be interesting to try two pulses through the coil. Check and see output over bridge rectification.

Regards, --S

[overunitydotcom]

Very, Very interesting video.

Please publish the circuit diagram,

so we can replicate this.

How exactly is the coil wired ?

?

Please come to overunity dot com

and explain in detail.

Maybe you extract the free electrons

that go out, when water is dissociated ?

Many thanks. Regards, Stefan.

[sirHOAX]

Its funny tho, this process has successfully re-conditioned my drill battery (Milwaukee 18-Volt Battery). Appears to hold a better charge. So their is some uniqueness to this process that people must take notice to.

Regards, and don't be afraid to replicate!

[crazzieg]

So what we have is a basic low frequency tank circuit. The cell acts like a electrolytic capacitor and the transformer is acting as the inductor. Guessing at the the size of the inductor you have,would be around 3 to 5 henerys and the cell capacitance .5 to 1 uf. This would lead to a resonance of around 112.5 Hz

So I'm guessing you are running on harmonics. I would like to see you slowly sweep the freq from say 50 hz to 5 khz and note the V/I.

[radzikiem]

I was going to suggest the same thing. This is serial RLC circuit, so with proper frequency you will have voltage resonance for sure.

[sirHOAX]

Well now its time to try it with higher voltage, hopefully will get a video out to everyone if the rectified house current (120V-DC) works.

Regards, sirHOAX :=)

[honda4004]

so if you have ionised water would that relate to natures lightening as i believe tesla was intrigued by lightening and its frequency and reaction on water in the air around...

[m3sca1]

hey honda!check my high voltage in a fog experiment.

[m3sca1]

im guessin this circuit is similar to the lawton reproduction of s. m3yers circuitry???does the water stay cold?

[sirHOAX]

Yes the water stays ice-cold.

[m3sca1]

wot about the coil? does it get hot??im going to try this with a toroid....nice 1 hoax

[harpersteven]

still waiting on a price??

[sirHOAX]

Going to get the parts you want today, and get a total and everything that you need. Sorry for the wait, but today I'll have a response.

[harpersteven]

thank you

[plengo]

So cool. Great ideia. Have you notice that you had small spikes on the begining but by the end after playing with the amps and frequency and comming back to 100ma you have higher spikes? I think is because after increasing the amps and frequency you had the "ions" on the battery moving so they are now showing some inertia when you come back. You could increase OU even more if you push the ions fast enough and them. Reduce amps and freqs to the point that the inertia will produce the extra.

[vbludov]

it would be helpful to see the output current vs input. same with voltage.

[sirHOAX]

This coil is so small, it is not even made to specifications that bedini and others state. So my only conclusion is if it is working at a small scale. What happens at a larger scale, with more windings made to the bi-filer coil.

My next attempt is to make a HUGE coil - possibly 5-windings on the bi-filer. Maybe 3800ft long, or only 1000ft. This coil is only wound with 36ft or so, imagine more.

[sirHOAX]

All I am trying to show is that resonance is there. It can be captured. Nothing more nothing less. If it turns out to be over-unity, then so be it.

[vbludov]

I like your experiment, I asked the question about the [output] Current and Potential because if you had an increase in either of the two without decreasing the other, you have an overunity. don't be discouraged by locked mind people or failures.

[m3sca1]

the bi-filar used by lawton has 100 turns 22 swg wire on a 3/8"ferrite rod.Also mentions toroid instead of rod,just harder to wind.

[harpersteven]

could you drop me a email at impondering@gmail dot com

[sirHOAX]

Ok, will get a message out to you.

[redviper101]

Is all this being ran by the battery alone?

[harpersteven]

i sent you a youtube mail please read

[jabrinka99]

Great vid

[ktservicescorp]

Ok...the hho cell is acting like a capacitor for the back EMF if I am not mistaken, the collapse in the magnetic field is creating voltage in the secondary winding. Are you using one battery for this experiment? Since I don't have the frequecy machine that you have, I suppose I can adjust my bedini motor to create the same frequency ranges. Although I cannot measure it, I can tune it. I am also not swift with electronic circuits (excuse the ignorance) but mofset transistors are needed why?

[sirHOAX]

Honestly in regards to tuning, it might be as simple as placing the magnets on top of the bifiler coil. Listening for pitch and adjusting the amperage that is going through the coil from the pulse to the hho-cell. Give it a go with your bi-filer coil. Do post results.

Its the one main deep cycle charging the smaller battery in combination with the hho-cell. Regards, --S :=)

[harpersteven]

well done... keep going

[tvryb]

WOW, those spikes really do look like the same thing Lindemann was getting. very impressive

[sirHOAX]

It is putting out sometype weird energy. Almost like it changes based on 2ndary coil with what is sourcing the bridge. Hope to build more. -heh-- Regards, --S :=P

[gibs7]

Hi Sirhoax. If I understand well, you are pulsing the primary of your coil, and the secondary is connected to the bridge rectifier. If it is so, I think that one side of the wave is back EMF and the other side is pulling current from your primary. Have you tried a diode instead of the bridge? Just to pick up ONLY the back EMF. Interesting vids.

[mielectric1]

very nice Sirhoax, could a large cap on the charging battery side help capture some of those better than a battery, the reaction time on a battery to voltage change can be a bit slow sometimes.

[sirHOAX]

Its rather weird how it is operating, almost like every battery i add it somehow compensates with adjustment otherthan predetermined current draw of .100mA-1A .. Regards, --S

[thinkofwhy]

I can understand how a back EMF can be used to charge a battery as it dissipates out of a circuit after an EM pulse (as depicted is some videos on YouTube), but as an average Joe, I don't understand what's so interesting about what you're doing. So you can charge a battery and power HHO at the same time? Why would Joe find that interesting, or think it's overunity?

[introvertebrate]

Nice work! Though could we see a schematic of this circuit? Don't really understand how the bridge recitifier is hooked up to the coil to charge the battery. is the power going threw one strand and the recitifier connected to the other?

ps. Ironically Tesla didn't invent the Tesla Switch ^_^ no one is sure how it got that name!

[sirHOAX]

Yes but provided Tesla knew about this energy before the advent of modern day measuring equipment like the oscilloscope. That is what is referenced to, his main understanding.

[ktservicescorp]

got it.... I am showing 20v off the bridge. I will hook up the bridge to the charging battery then to the hho cell postings on the way.

T

[marthale7]

Awesome, I want to do that! :) So how do you tie in a Frequency generator to the power source? ( sorry for my ignorance )

Great work!

[Justin2355]

Awesome video!