hey im building an 02 gt like yours but with a 76mm and i was wondering what you might recommend for a transmission? i want to lose the 5 speed for a good auto for more consistent runs
@immikeurnot When I put the car together about six years ago, cars at about 800 WRHP or higher were having spark and timing problems with the 4.6L coil on plug setup when paired with a standalone system. So I kept it simple and tossed in a distributor. Now with the advances in the new F.A.S.T. or the BigStuff 3 I would go coil on plug if I were to do it again.
@mrdragking13 The car does see a decent amount of street driving; but it's far from actually being legal to drive on the streets. However last time I got pulled over all I got was a no front plate ticket.
This is one great car !! Two valve mod motors can & do rock some power, all you gotta do is start working on one & not be intimadated by the technology.I found them to be almost as easy to work on as the push rod motors. KEEP GOING FASTER !!
Simply beautiful!!!! Extreme props for this accomplishment. I saw that car for sale out in the south bay craggies' in Cali! I would have loved to have the money awesome peice of machinery.
what a crock of useless shit. I`ve saw 10 second fuckin sierra roadcars (yes ones tha tgo round corners) . What a waste of money. Your whole life and time ploughed into a pointed small cock substitute. I bet your wifes getting banged by a neighbour as we speak.
wow nice fucking ride.. i gota 98 302 stroker sohc with a t76 ball bearing turbo 16psi and a shit load of other mods more like a 10 sec street car yours is outa hand are you running pump gas?
danielchambliss i'm gonna have to respectfully tell you you don't need a drop kit or a spacer to put 315s on your car cause i have them on mine and like you have room to spare but i don't have any spacers on mine
hey rsi i am going to respectfully tell you that you are incorrect. I have 315 drag radials on my mustang. I do not have rolled fenders. You have to lower the car 2 inches and add a inch and a quarter spacer. They fit with room to spare.
They can actually be bored and stroked to a 5.3, once you have gone that far though SC's and TC's cant be used due to the thin cylinder walls. U probably know this though.
OK I got ya, yeah man the most you can bore and stroke one of these out to and still maintain enough cylinder wall thickness to run a SC or a TC is 5.1 thus making it a 308ci. This is the same set up that the 2001 MMFF GT Ice Box runs.
@ACDC88 i heard that the old 5.0 wasnt really a 5.0 it was a 4.9, but the new 5.0 is really a 5.0. thats what motor trend said. they did all the math and everything.
@racingkid87 I don't know but now I know that Lil Jon remix this song when he made "throw it up". Had to listen to it 4 times because I knew it sounded familiar before I remembered where I heard it.
Hey guys hes got a parachute.....that means he goes fast!!!!
mountainmaxbrapper 3 weeks ago
Is there somewhere I can go to find the complete specs on your car because I would like to look into an almost duplicate build. Thanks in advance.
ironaddict11 1 month ago
Rocket on wheels baby !!!
therhythmslave1 1 month ago
only 11s
GwoodBloodz 2 months ago
nice!
OffTheWall158 2 months ago
Mustang on fatties and skinnies=sexy. Saleen mustang=super sexy. Saleen mustang on fatties and skinnies=sexiest god damn thing on eart!
hugoortiz05 3 months ago
hey im building an 02 gt like yours but with a 76mm and i was wondering what you might recommend for a transmission? i want to lose the 5 speed for a good auto for more consistent runs
mattstang281 6 months ago
Nice! That thing is NASTY! Love it!
Holocaust429 6 months ago
Ok, I have to ask. Why a distributor?
immikeurnot 6 months ago
@immikeurnot When I put the car together about six years ago, cars at about 800 WRHP or higher were having spark and timing problems with the 4.6L coil on plug setup when paired with a standalone system. So I kept it simple and tossed in a distributor. Now with the advances in the new F.A.S.T. or the BigStuff 3 I would go coil on plug if I were to do it again.
FastIntentions1 6 months ago 6
@FastIntentions1 Thanks for cluing me in!
immikeurnot 6 months ago
wow...... great reply!!!!
sonirichards 6 months ago
Sweetest car I've seen in a long time !
slow281gt 7 months ago
how much rwhp this car had at the time?
tucubanito305 7 months ago
What song is that playing
revdimara 7 months ago
MMR Modular Power baby - new engine getting ready to go in soon, we are hopping to see the Fast intentions guys go in the 7's !!
MMRMUSTANG 8 months ago
@MMRMUSTANG
My 665 hp 2v has been sporting a MMR 900 shortblock for about 5 years now and can still trap 135.
jivepepper 8 months ago
@jivepepper how much did that mmr shortblock cost? Ive been really interested in buying one of those
Sk8FalIen 5 months ago
@Sk8FalIen
3200 shipped from Cali to WV. I also got their oil pump, notched pistons, and the upraded Arp fasteners instead of the regular arps..
jivepepper 5 months ago
@MMRMUSTANG Yessssssssss. Drop your prices just for me? :) lol. When I start the turbo build, im going with the MMR 900 shortblock. MMR = Kick ass
A4Eaton 7 months ago
is that a logan intake manifold
Mustang2160 8 months ago
there are faster Mustangs, but holy shit what a great video!!! excellent combination of video and music, FIVE STARS!!!
MauGT1 9 months ago
2V POWA!!!
GTMustang2k 11 months ago
Love the mustang and the music, both were amazing :)
Kairi9194Sora 11 months ago
WOW
autobodymencom 11 months ago
wow did you pull that with your full interior?????
andrewmccall2000 1 year ago
@andrewmccall2000 That was with full interior minus the back seat. The car weighs 3460lbs with the stereo and all.
FastIntentions1 1 year ago
is this street legal?????????? what is the fastest street legal 2 valve gt?
mrdragking13 1 year ago
@mrdragking13 The car does see a decent amount of street driving; but it's far from actually being legal to drive on the streets. However last time I got pulled over all I got was a no front plate ticket.
FastIntentions1 1 year ago
This is the sickest 2V I have ever seen !!! And everyone is on the 4v bandwagon these days... Way to kick ass in a GT
eustispanther 1 year ago
GREAT RIDE
zacmistychary 1 year ago
Music Fail.
TheDartblockstang 1 year ago
@TheDartblockstang Hey, Hey take it easy on my music!
FastIntentions1 1 year ago 8
@FastIntentions1 Dude screw that... the music and the stang are sick ! Makes my procharged 2v look like it's going in reverse !
eustispanther 1 year ago
@TheDartblockstang
ur a fag
drgnracin72 7 months ago
@drgnracin72 fuck you man.your fuckin video sucks and your channel.
TheDartblockstang 7 months ago
This is one great car !! Two valve mod motors can & do rock some power, all you gotta do is start working on one & not be intimadated by the technology.I found them to be almost as easy to work on as the push rod motors. KEEP GOING FASTER !!
02mustangboy 1 year ago
Nice gt!
mrmarciocruz 1 year ago
Simply beautiful!!!! Extreme props for this accomplishment. I saw that car for sale out in the south bay craggies' in Cali! I would have loved to have the money awesome peice of machinery.
jose619451 1 year ago
Amazing Great Job!!
Live2Crawl 1 year ago
133 60 foot
FastIntentions1 1 year ago
just wondering if your motor is a stroker or not and how long it takes you to spool? also is it a t4 ot t6?
ttony281 1 year ago
what song is this?
smotorsports 1 year ago
street legal? please answer thanks
greekooo3 1 year ago
60ft????
Fromthehipglock30 1 year ago
what a crock of useless shit. I`ve saw 10 second fuckin sierra roadcars (yes ones tha tgo round corners) . What a waste of money. Your whole life and time ploughed into a pointed small cock substitute. I bet your wifes getting banged by a neighbour as we speak.
cupcakeflake 1 year ago
HOLY SHIT!Supra smasher!
amdelux1 1 year ago
jesus!
urahara300 1 year ago
this inapropriate , how dare you put porn on the internet
lote1234567891011 1 year ago
so sick.nice mustang.its not street legal is it???
romanich12 1 year ago
wow nice fucking ride.. i gota 98 302 stroker sohc with a t76 ball bearing turbo 16psi and a shit load of other mods more like a 10 sec street car yours is outa hand are you running pump gas?
makaveli828 1 year ago
man that cars awsome, can you list some of the modifications
MoOkstErChOokSteR06 1 year ago
this beast is built right car and motor great job. look how clean and straight she launches good god.
kraden18 1 year ago
Is there any recent video ?
Any motor spec.?
play03boy 2 years ago
Comment removed
SalkowskiMotorsports 2 years ago
I will be your huckleberry!
Get it going again Danny!
TwinBullitt 2 years ago
Shit that 2V is a fucking beast. I know you destroy cars on the road:)haha
03GTmustangGT03 2 years ago
danielchambliss i'm gonna have to respectfully tell you you don't need a drop kit or a spacer to put 315s on your car cause i have them on mine and like you have room to spare but i don't have any spacers on mine
buffant 2 years ago
hey rsi i am going to respectfully tell you that you are incorrect. I have 315 drag radials on my mustang. I do not have rolled fenders. You have to lower the car 2 inches and add a inch and a quarter spacer. They fit with room to spare.
danielchambliss 2 years ago
Actually the car has a pair of 28/10.5W s on it which are wider than a 315 by about a half inch.
FastIntentions1 2 years ago
I was just throwing in my 2 cents worth. I changed my setup. Still a 315 but i took out the spacers and flipped the quad shocks upside down.
danielchambliss 2 years ago
awesome !!
oiler31 2 years ago
Good work Danny!! Keep it up.
jaybquick 2 years ago
no 10.5 are the widest u can fit with stock fenders
rsi123 2 years ago
slicks and d/r's you gotta roll the fenders......
GODSvendetta 2 years ago
hey just wondering with the 28x10.5's, did you have to modify anything in the rear end to make them fit?
studweiser2005 2 years ago
No on a 99 and up mustang a 28/10.5 S not the W will fit with plenty of room. It takes a 6.5 to 7 backspacing on the rim.
FastIntentions1 2 years ago
Holy BATAMAN !! sick 2V power there !!
please post another vid when its making the 1100 whp !!!
ry855 2 years ago
them perfect looking wheelies
RrMurph18 2 years ago
best mustang video made yet
FoxIsMyBitch 2 years ago
very impressive anyone know how much power it makes
meanstang02 2 years ago
At the time of the video 970 RWHP. The Car now makes 1100 and has gone 8.70 @ 160
FastIntentions1 2 years ago
whats the name of this song? f'**king sick car dude
cobra50stroker 2 years ago
does anyone know what tires he was running? are they 10.5?
pmac21 2 years ago
most likely no but people do shit like that so maybe
FoxIsMyBitch 2 years ago
28/10.5 ET Drag
FastIntentions1 2 years ago
Thats is a sick ford, Check out the wheel stands. Ford > Chevy never equal.
RicoSuave229 2 years ago 3
That is a fucking ungodly turbo. Bad ass stang. What's the dyno numbers on it?
gr3at07 2 years ago
does any one know the name of this song?
fausty786 3 years ago
requiem for a dream
AllGo5oh 3 years ago
Thanks
FILIPINOTUNER 2 years ago
very fast stang
fordkinglimpbizkit 3 years ago
thats one nice 2v
chrome98gt 3 years ago
Thats Mad tq.!
TwinBullitt 3 years ago
Guys guys its a 2v! Thats very impressive for a 2v!!!! I just wonder how much money was put into that car?
bullittben50 3 years ago
that is one bad 2v!
k20b18h22 3 years ago
i want one =D
undead600 3 years ago
sick video.. i used to work for these guys :)
runslikeachicken 3 years ago
I'm not criticizing, but I'm just wondering how you ended up with a Halo 3 song in this vid lol. Very nice vid btw
Black217 4 years ago
i saw this car at their shop..sick.
dspielman 4 years ago
wow very impressive
00freightshaker 4 years ago 2
One question, it says its a 300cid, but then it says its a 4.6, wouldnt a 300 be considered a 5.0?
ThreePointThree 4 years ago
a 4.6 can be stroked to a 5.0 but still be a 300CID
mustangwner2003V6 4 years ago
They can actually be bored and stroked to a 5.3, once you have gone that far though SC's and TC's cant be used due to the thin cylinder walls. U probably know this though.
cafeevil 3 years ago
OK I got ya, yeah man the most you can bore and stroke one of these out to and still maintain enough cylinder wall thickness to run a SC or a TC is 5.1 thus making it a 308ci. This is the same set up that the 2001 MMFF GT Ice Box runs.
cafeevil 3 years ago
no a 300ci is a 4.9,a 4.6 is a 281ci,a 5.0 is a 302..just thought id clarify for you
jagerslayer 3 years ago
Most Motor companies round up, And besides what could those Chevy fags call it if it was a 4.9. only a rustang no more 5.slow. LOL.
cafeevil 3 years ago
actually 302 is 4.9, and 307 is 5.0, ford just rounded their 302s up and called them a 5L but their are actually a 4.9
ACDC88 2 years ago 4
you a 4.9 is a straight 6 and its a 305 for a chevy and 302s are 5.0l, they both are 5L
BayernMunchenFan11 2 years ago
@ACDC88 i heard that the old 5.0 wasnt really a 5.0 it was a 4.9, but the new 5.0 is really a 5.0. thats what motor trend said. they did all the math and everything.
FordsBetter516 10 months ago
vay bee süperrrrrrrr
kaptagel 4 years ago
lol epic enough music :) ?
mxmang 4 years ago
Badass homie.
steeda98gt 4 years ago
wow.............. very badass.
drgnracin72 4 years ago
Awesome! Proof that 2v engines can be kickass too!
What music is that? Does anyone know?
racingkid87 4 years ago 11
hell yeah!!! I'm addin a 2.1L Kenne Bell in about 5 months. 425rwhp at 9lbs with all my other mods!!!
all i know about that song is that its in Requium for a Dream
spaldingpm 4 years ago
Throw It Up- Lil Jon and the Eastside Boys, has that same tune, but thats not the real song lol.
ford50stang 4 years ago
@racingkid87 I don't know but now I know that Lil Jon remix this song when he made "throw it up". Had to listen to it 4 times because I knew it sounded familiar before I remembered where I heard it.
huntergluck 1 year ago
This is Sparta!!
convar89 4 years ago
wow so badass ... Turbo FTW!!!
700hpV6 4 years ago
pimp!!!
socalmustangs 4 years ago
Very nice geting in the 8's
jivepepper 4 years ago 2
very nice!!!
01gt46 4 years ago
This is Madness.
KinhWilliams 4 years ago