IPSC USPSA my 18.19 second run with my glock 17 racegun

[1234tbell99]

are you still shooting a carver ? have you made any changes ? i found that shooting 9 major that the 3 port comp just wasnt keeping the dot where I wanted it I have Bobby Carvers 4 port comp coming in tuesday and my 11.lb im going try a 13 and 15 pound recoil spring and see what kind of results I get ...

[trevormcneil76]

Thanks for proving that a g'luck race guns can kick some a**

[84MFK]

That run was sweet

[40calfmj]

regarding the glock open race guns do u have to to replace the stabilizer springs ?

[firepower50665]

go to the USPSA website and look up the local clubs theres a ton of them

[ARBuilder1776]

How do you get into comp shooting in Ft. Bragg/Fayetteville area?

[lovshooting]

I have almost the same setup. I have a carver mount and c-more sights like you as well as a 10 port comp from carver. I have a ccf slide and I have lowered the ejector port as well as changed the lsb spring (stronger one) and used an non-lci extractor. I am still getting stove pipes... I am about to give up on this setup... I am using 8.1 grs of hs-6 sitting on a 125gr jhp hornady (cone one) with 1.11 oal. I don't know hwat else to do... : (

[teeroux]

Pretty derned rude folks talking behind you.

[40calfmj]

may i ask whats your powder load and brand ? bullet wt. is 115 ? is it ipsc approved or uspsa approved only .

[1234tbell99]

@40calfmj im using a 124 gr montana gold HS6 7.2 check out my race glock vids



[bcolmenar]

Sir,

What is reload recipe for making the 165PF in your open division? I will also be using a g17 racegun very similar to your set up. Please let me know. Thank you.

[1234tbell99]

@bcolmenar im using a 124 gr montana gold hp and HS6 7.2 gr

[690sm]

Would it be a lot more faster if you engages the steel first and starting with a long stick then engage the last four paper? just asking as i do not know the COF. Thank you.... Great run by the way!!!

[firepower50665]

@690sm it was faster to engage the paper and leave the steel for last it was 18 pieces of steel. when you engage steel you might or might not knock them down. not knocking down steel can be frustrating and throw you off of the rest of the stage. i started with a large mag of 27 then after all of the paper was done i reloaded another 27 rd mag to engage the steel fresh mag= fresh start on the steel.

[echeesekid]

@firepower50665 how did you get a 27 round mag?

[1234tbell99]

@echeesekid check out bobby carver race glocks in jacksonville fl, at bb-enterprise I video of his parts

[firepower50665]

@690sm we also had to leave our mags on the blue barrels so i had to place my mag strategically on the course to accomodate the way i shot the course.

[690sm]

Great info. Thank you...Again, it was great watching your run...

[appletreecone]

holy crap ! is that thing even a glock anymore ? well done with the mods !

[TheDastardlyDildo]

you turned your glock into a plasma blaster.

[bpowersman5000]

Martin, are you doing gunsmithing at all?

[firepower50665]

yes i am a certified gunsmith

[bpowersman5000]

I was wondering if you'd want to help mount a scope on my Mosin Nagant?

[firepower50665]

yes i can is it 8 or 7mm?

[bpowersman5000]

7.62x54r, I think you are thinking Mauser. I need to wait a bit before I buy the scope mount (We just paid a shit ton for all three of our cars). Maybe sometime we could go shooting like way back in the day.

[firepower50665]

ahh yes i agree i was thinking mauser wow im too used to all of this new shit coming out and i forget about the good ol wood and steel  yea dude that would be fun

[bpowersman5000]

We'll have to go out before it starts to snow, you still got my number?

[Dragunovluv]

are u a left handed

[chowken312]

yea it has to be Open, as he has optics.

and he shoots in A class? I bet he could go into Master with that speed

[firepower50665]

well since everyone wants to know here it is... its a glock 17 OD green, lone wolf slide with a lowered ejection port just above where the serial numbers would be on a regular glock, kkm match barrel ,with a bill carver custom compensator, non captured guide rod with a 12 lb spring. bill carver mount with 6 moa cmore, dawson ice magwell, ghost rocket 3.5# trigger disconnector , ill do a vid on it in more detail in the near future. i shoot A class for now.

[maximillianof98]

cool shooting with cool gun.

can make a vid on the gun? a short review or something on the mod you had done on it.  wanna have a closer look.

thanks.

[kiddvc3]

ipsc/upsa with glock 17 are you shooting minor?

[Blackjackal45]

cool, is that a cocking handle mounted on the back of the slide ?.. interesting..

[firepower50665]

yes its a slide racker made by a company called SJC it replaces the rear sight notch on the back of the slide and sets itself in place with an allen screw

[pittsky]

Nice shooting man!