PSP TUTORIALS: How to assemble your PSP 1001 Part 3/3

[andrew79483]

i waltched part 1,2,and3

[HashSidd99]

wait did this work after you put it back

[Mrhackeable]

Ok ummm i've done all the steps for take apart and assemble it but i had the same problem as u it turns on and the lcd turns so liitlle that u can hardly see by turning to the lihgt it looks kinda red... what should i do?

[Natetheboss9]

I have watched all 6 of the videos on how to disassemble then reassemble your PSP. It was educational and entertaining for me. With that being said I will not follow your DIY when I do mine! You broke several parts during tear down and assembly and failed to go back and show us what not to do! If you claim to be a pro, like you claimed in one of your earlier videos please make sure you know what the hell you are doing! I did not thumb down or up. It still helps! Thanks!

[ReyistheBeast]

@Natetheboss9 Hey dude thanks for watching. Before I made this video i took my psp apart several times and had no problems, but when I made the video all kinds of dumb stuff was happening. But i understand where you are coming from. Thank you

[HashSidd99]

@Natetheboss9 I agree he sucks at this stupid fucktard broke my 250 dollar limited edition psp anyways lets all sing in harmony ...... fuck you reyisthebeast

[HashSidd99]

@HashSidd99 by the way I was just kidding he fixed my psp motherboard thanks dude i suscribed

[HashSidd99]

@HashSidd99 my psp was 160 not 250 and to all fucktards who told this guy that they broke it suck it up bitches because he took his time to show you how to assemble and disassemble

[Natetheboss9]

I have watched all 6 of the videos on how to disassemble then reassemble your PSP. It was educational and entertaining for me. With that being said I will not follow your DIY when I do mine! You broke several parts during tear down and assembly and failed to go back and show us what not to do! If you claim to be a pro, like you claimed in one of your earlier videos please make sure you know what the hell you are doing! I did not thumb down or up. It still helps! Thanks!

[findyourway19]

hey so did you end up getting your psp working? What was wrong @ReyistheBeast

[inyourface48]

Your videos rule. I took it apart blew the dust out (I had dust bunnies living in my PSP) and put it back together, and now my R trigger works again. XD

[ReyistheBeast]

@inyourface48 Thank you for watching my good friend.

[DarkNemesis25]

what ever happened to putting that tiny spring back in... i dont see you put it back in any of the videos..

[gonzoJONinYOURmouth]

How did you fix your psp dude? I did everything step by step

[Lampaizzo]

@gonzoJONinYOURmouth

yes you did everything step by step :D but in the video 1 maybe more step missing thats why your psp not working like his:D

[Conker347urD34D]

was a big help

[dabozuk]

Good videos, used it to put a new shell on, but I ended up with 3 screws left over, what the hell? Anyway, kudos for posting the vids, mine turned on and plays fine.

[MaximLee1993]

9:43 hahahahaa!!! i love how you just play it cool like.... "umm yeah.... basically thats how you put it together guys! ^_^ " and your thinking to urself *FUCK!! MY PSP BROKE :,( *

[ReyistheBeast]

@MaximLee1993 You made me luagh so hard dude! LMFAO. Thats exactly what happened!!!

[HashSidd99]

@ReyistheBeast did it break ?

[UnderCoverOfStrokes]

Alright I got it to work, it turns on and so does the screen but it stays black. Instead of saying the Sony shit.

[ReyistheBeast]

@UnderCoverOfStrokes LMFAO...well at least it turns on.

[UnderCoverOfStrokes]

I'm sorry if I'm annoying you but you're the only person I really trust here, I fixed the power I just need to fix the LCD, I'm sure it works it's just the door to lock it down to the motherboard broke and I'm kinda stuck.

[UnderCoverOfStrokes]

And its weird because I took it apart and tried to turn it on and it did, but I could only hear it turning on.

[UnderCoverOfStrokes]

Dude my door for the LCD broke both the little one and the big one, can I glue it with wire glue? I mean the actual ribbon cause the little door that keeps it in completely broke and I lost it. And it won't even turn on at all any ideas? Please help.

[TheBloodline619]

lol i was freaking out cus mine wasent turning on and im like omg mother fucker but then i realized i forgot to put in my battery lol

[ReyistheBeast]

@TheBloodline619 LMFAO...WOW!

[TheBloodline619]

@ReyistheBeast hey did you give me thums up for my comment jw? im kinda new to youtube

[FourBrothersC]

if you dont have that small ribbon that goes to the LCD hooked up just right the screen wont come on

and one note make sure you completely power off you psp

[Pyrodude465]

My stupid psp cover plate wont go back on now

[ReyistheBeast]

@Pyrodude465 something is loose....try to get that motherboard in place with all the screws

[yellowfellow]

thanks man. this really really helped so much

finally got my creamy green cover on haha

[ToxicReaper117]

lol why would you even take it apart in the first place xD???

[ReyistheBeast]

@ToxicReaper117 To change the Back Housing.

[masterdigix]

I did all that and was left with one tiny screw what should I do? by the way mine turn on but the dpad dosn't move properly...

[ReyistheBeast]

@masterdigix START ALL OVER! Watch my video again and make sure you have every screw screwed in VERY TIGHT.....your d-pad might not work properly becuase of 1. Ribbon not plugged in right ....2. The screws are too loose....3. You broke it..lol...

[Viankennels]

ok you know at the end here when you say the hardest ribbon to put back is the tiny one from the led screen...ok on my actual board the door came off the board itself. just popped off...Now what? Can it be glued or sodered into place again?

[Viankennels]

found out this is the PSP LCD Screen Backlight Ribbon Cable Connector Socket, and it is typical that it needs to be replaced. So I am going to have to order one and solder it on. I also ordered a solder gun to do this...lol And since one of my speaker wires popped off I will be soldering those as well....see even a 40 something mother of 3 can do these things. Given detailed youtube instructions...lol

[ReyistheBeast]

@Viankennels WOW....thats awesome....Thanks for watching!!! But the door shouldn't be soldered on, you can just pop it back in.

[kindem]

thanks a lot it help me too much i think i got ripped the rubbon that was glued jaja lets hope that is nothing fails thanks

[ReyistheBeast]

@kindem HOPEFULLY.....good luck buddy

[BrainzIRL]

Thanks for posting the guide was a great help, just replaced my wifi board :D

[tryTWOresistClicking]

ok, I did everything the screen turn on and everything, but the umd disc reader wont read my discs, it just spins and doesnt read, PLEASE HELP

[ReyistheBeast]

@tryTWOresistClicking OH NOOOO......Bad news....if it doesn't read the disc then your gonna have to open it all up again....and go straight to the UMD....Make sure you have the ribbons all plugged in....and hopefully you didn't touch the lens that reads the UMD.

[tryTWOresistClicking]

@ReyistheBeast so, Im going to have to replug in the ribbons? I hope it works , Im doing it right now

[tryTWOresistClicking]

@ReyistheBeast I see whats wrong now, the rubbon that was glued got ripped =\

... that sux

[ReyistheBeast]

@tryTWOresistClicking That does suck....but if you have your PSP Hacked you don't have to worry about that....you can just download the games

[MrLukeySkywalker]

how do you take off the back of your psp? 

[ReyistheBeast]

@MrLukeySkywalker well you don't take the back part off. The back part is like the foundation to the entire PSP....you just keep going until you reach the end....THATS THE ONLY WAY!

[heroesrheroes]

I am having the same problem that you had at the end. Did you manage to resolve it? If you did, could you let me know how?

[yo0s1]

@heroesrheroes

will i did but im still working on it they say that i was the black light fuse on the mother bored that u just have to bridge them together. n is F enh hard to do

youtube.com/watch?v=b0oN-TJcCI­M thats the link that will tell u how it fix it let me know if u done it cuz im still practicing on how to bridge it lol

[ReyistheBeast]

@heroesrheroes Yes i did! I just had to puch the ribbon from the screen into the motherboard a Little harder. I am lovin my psp

[yo0s1]

dude i wounder did u ever got ur psp fix cuz i have the same problem as u just wondering i did the same thing over n over again n it just wont light up