1/4 Scale Grave Digger Part 11B - What does "Scale" mean

[kaimanadauluahunta]

Srry I just watched the video again and I meant to ask about the 1/10 scale

[rcWizzard]

To - @kaimanadauluahunta

Chassis by JPS Products, Inc at jpspro. com

[kaimanadauluahunta]

Cool video. If u find the time can u make a video on the 1/8 scale. Thanks:)

[rcWizzard]

To - @kaimanadauluahunta

It's still a clear unpainted 1/8 scale body, not much to show.

[barracuda253]

I like Baja better than the rest ones.

[jasonsbradley]

can u tell me where u get the small digger

[rcWizzard]

To - @jasonsbradley

My basement, it's scratch build. Check out video parts A, B and C

[smartymanify]

this video is shitt if tose badd boys dont run

[MrDannytenerife]

But dos it drive???????

[rcWizzard]

To - @MrDannytenerife

Working on that part. Have you seen my other videos?

[bayou250s]

I have the same baja buggy

[FourDollaRacing]

Moral of the story: your subscribers aren't too bright!

[JetMech72]

You started with a nice reference, the Sprite can, but you failed to pick it up and set it next to the 1/4 scale truck. :(

[rcWizzard]

To - @JetMech72

I see your point, my bad.

[JrinINDY]

@rcWizzard still cool cars though..

[clslwskjw]

bhwjdbhsgfd



[rcWizzard]

To - @clslwskjw

English Dude! English.

[ilvstrngwmn69]

nice truck

[tylerboy09]

i love that you have a skeleton in the 1/4 !!!! COZ its a grave digga!!!!! love it.

[1091jordan]

i have the 1/5 scale Kingmotor 5B. It's fast and its freakin awesome.

[xThexProx69x]

@rcWizzard awesome work on the 1/4 scale one ! Keep up the work man

[xThexProx69x]

Where could i get the 1/10th and 1/4 scale ?

[rcWizzard]

To - @xThexProx69x

The 1/10 is from JPSpro. com

The 1/4 is from my basement, it's scratch built.

[dubois4452]

y roule pas ? --'

[geniusme2010]

Sum1 shoot that f**king bird.

[biggmoves]

the birds in backround had qartet going....cool trucks

[Sublime865]

Is it the full width of a monster truck (they are about 12 feet wide so 1/4 scale would be 3 feet, maybe, hard to tell in the video) but maybe that's just cause there aren't monster truck tires on it. I've never concerned myself with scale. I use it mostly for categorization (to compare something to my Savage I look at 1/8th, my Firestorm 1/10th, etc). Best of luck to you, I know enough about customs to know what an undertaking it is, and it looks great!

[rcWizzard]

To - @Sublime865

The tires should be 3 inches wider, each. Width is about 30 inches.

Thanks.

[Aniquilathor]

@Sublime865 sssssss

[wickedeagans]

man i love ur 10th scale one man.. u make that one to im guess? i love it man

[rcWizzard]

To - @wickedeagans

The aluminum parts are from JPSPro. com

Thanks.

[marcot401]

What a beautiful place you live

[SuperAodClan]

Got the orange rc its so fat 60mph iv got a video on ma channel take a loo

[cygan2002]

it's so stunningly quiet on where you live

[shabbysminitruckin]

all you do is talk i want to see that bastard run

[rcWizzard]

To - @shabbysminitruckin

Check out part 22.

[rcWizzard]

To - @shabbysminitruckin

Which one ???

[TimTim11111111]

Nice models, Is that a Conley in the 1/4 or is it a dummy?

[rcWizzard]

To - @TimTim11111111

Did you see my other videos?

That's no dummy!

[ibbong420]

Keep up the work man i have been following your build for a couple of years, when i found it while looking for Conleys. Some of these people on here are so stupid there not even worth your time explaining it to them. They will never learn or understand what your talking about. cant wait to see if your cooking something else up.

[flybaby95]

i love the little 1/24 scale one



[1973dodgestepside]

Im glad you have all that money to blow on them toys...............

[TheAdventuresClayMan]

Not 1/4 scale, 1/4 of a grave digger would be the size of its wheel/bigger then that

[rcWizzard]

To - @TheAdventuresClayMan

Grave Digger #20 is 16 feet long, my truck is 4 feet long. 1/4 scale, Yes!

[TheAdventuresClayMan]

@rcWizzard Wait wqhat does #20 mean, is that not the real one?

[rcWizzard]

To - @TheAdventuresClayMan

Yes, I'm referring to the real GD #20 Truck. I asked Dan Bright, the builder of the GD Truck(s), and my Aluminum/Stainless Steel Welder, he verified it's 16 feet long, give or take a few inches. What were you using as a reference when you said "Not 1/4 Scale" ??

[TheAdventuresClayMan]

@rcWizzard It just looks so huge, like one of the wheels is like the height of 2 people

[rcWizzard]

To - @TheAdventuresClayMan

You said "wheel" again, I think you meant Tire. A Monster Truck tire is 66 inches tall (or diameter) that's 5.5 feet. I'm 5' 8", so I'm (1 people) 3 inches taller than a MT tire. You ever watch Monster Jam?

[resdes213]

@rcWizzard an averge car is 16 feet long the gravediggers like 25 feet long

[rcWizzard]

To - @resdes213

Dude, you're off by 9 feet. Grave Digger #20 is 16 feet long.

[olderanddecrepit]

@TheAdventuresClayMan I agree. Before I scrolled down and saw your comment I immediately noticed the wheel size and gaged it from there. Too small.

[pwnerbros]

that is not a 1/4 scale it is way to small

[rcWizzard]

To - @pwnerbros

"way to small"?? How long do you Think a 1/4 scale version of Grave Digger #20 should be??!!

Comments like yours I normally say check out Part 11B, but you're here. Have you ever seen an HPI 5B??

[mAdMoNkEy012345]

i want that sprit

[sbeer6er]

you can totally ride the 1/4 scale

[doriancalebgonzales]

where did you get that full sized can of sprite?!?

[rcWizzard]

To - @doriancalebgonzales

My refrigerator.

[timpos546]

And this is a ATV and this is a Car :D

[andreiyoungonebest]

WOW lol you acctauly have that much remote control cars WOW

[Duckyistrippin]

it didnt look 1/4 scale until you showed it next to a baja 5b. Ive got a baja in the shop right now {dont ask} and that thing is BIG. Your monster truck makes it look tiny!

[badbrad2271]

get a life!!!!!!!!!!!!!

[rcWizzard]

To - @badbrad2271

I will, when I get bored with this one!!

[forestfire10101]

Let me explain something to you dumbfucks. This is 1/4 scale Grave Digger. Because if Grave Digger Is really 16 ft, then a 1/4 scale model only needs to be 4 ft. Do the math

[Skormm]

@forestfire10101 Yea, but this truck isn't 4ft....

[rcWizzard]

To - @Skormm

It's 46.5 inches long. I'd call that 1/4 scale.

[Skormm]

@rcWizzard Sorry, I'm new to the RC world so I'm not really that familiar with the scales. Are the tolerances pretty loose? It just doesn't seem like if you multiplied that truck x4 it would be as big as the real thing. I mean 4 x 46.5 is like 16 feet long, but it just doesn't seem like this truck would be as tall as the real thing, but I didn't really get much perspective in the video. How tall is it?

[rcWizzard]

To - @Skormm

Right now it's in pieces. It's around 30 inches tall.

[TheCountrycrawler]

Damm some of you are very rude . He has made a bad ass machine that most of us can only dream of. Good job now you haters and judges STFU this is bad ass

[Left4Dead3232]

My bad, I did miss a comment, and sorry.



[rcWizzard]

To - @Left4Dead3232

What part of my comment did you not understand?

[nerdyrcdriver]

@Left4Dead3232 left4dead, doesnt sound much like rc, I could be wrong. I agree that his 1/10 looks more like 1/8 rc class. But it is probably 1/10 scale to the real thing. I know in person that his hpi baja is a huge car rc wise. 16/4=4ft long. This guy knows his stuff

[TheDrakenZ]

@Left4Dead3232 16/4

[Left4Dead3232]

@TheDrakenZ What did you mean by that? did i miss something

[rcWizzard]

To - @Left4Dead3232

It appears you missed my comments to u.My first reply to your first comment was:

You should do some research before you assume something. (you know the meaning of 'ass u me' yes?!)

Grave Digger #20 is 16 feet long, what's your definition of a 1/4 scale version?

Your reply was:

What?

Then I replied with:

What part of my comment did u not understand?

Your 1st comment was:

Your definition of scale is way off buddy, don't make a video about something you haven't researched

[codydorman420]

Are any of those gas?

[rcWizzard]

To - @codydorman420

The 2 big ones are Gas.

[WeWhereYoung]

Damn thats a big can!!

[MrCameraMan825]

can i have one?? :)))

[rcWizzard]

To - @MrCameraMan825

Sure, go to ConleyPrecision. com

[squirrelkiller247]

did you build that 1/10th scale?

[rcWizzard]

To - @squirrelkiller247

Yes, it's all Aluminum by JPS Products, Inc.

[sharkchild696]

man u sure are full of maney to posses all that cars

[rcWizzard]

To - @sharkchild696

Not when it's spread over 20 years.

[TheLolipop854]

geill



[battlefieldSFDclan]

Drive the damn truck

[rcWizzard]

To - @battlefieldSFDclan

Watch my other damn Video's!!!

[MrMacisbeast]

hey i have a savage 4.6 how could i make the decals flame for grave digger body if i bought it and what kind of tires what whould i need to do

[rcWizzard]

To - @MrMacisbeast

Check out part 11. I used Parma blank and flame masks.

Have you seen the Jumbo Kong tires?

[SuperSamUK1]

That dosnt look 3.2feet long

[rcWizzard]

To - @SuperSamUK1

That's because it's 3.875 feet long. (46.5 inches)

[manorcraft64]

rubish vidio

[911Ljskyline]

ahaaa the 5b was small

[ledzepcamaro67]

where can i get one of them 1/4 scale trucks?

[rcWizzard]

To - @ledzepcamaro67

On e-Bay If you're lucky. Other wise you have to make them your self.

[sl1mey]

"scale" is not hard as long as you have any basics in math with fractions.......but I guess americans (yes I am one) are retarded if they don't have a calculator....

[teosuperman]

0:45 invisible monster truck

:):)

[Eddievjr5]

he used lawnmower wheels. haha thats cool

[202Braaap]

I think my weiner is about a 1/4 scale too..

[TheSkateBuds]

how big is a 1/18

[rcWizzard]

To - @TheSkateBuds

A 1/18 scale Grave Digger #20 should be 10.67 inches long.

[CREED523]

Is the small one signed by dennis anderson

[rcWizzard]

To - @CREED523

Yes, that's when he gave me the name Wizzard.

[TheSupertecnology]

make a video of the biggest one running in grass or something like that! wow it sounds amazing!

[rcWizzard]

To - @TheSupertecnology

Check out part 22.

Thanks.

[toggerlord]

hey with these sizes is there like an average size for each scale

[rcWizzard]

To - @toggerlord

Well, Grave Digger #20 is 16 feet long. So divide by the scale to get the proper model length.

[iloveumarilyn]

is it remote control car???

[rcWizzard]

To - @iloveumarilyn

Yes. :-d

[24colors1]

sick



[stopurdeadmate]

i have a feeling this gut likes gravedigger!!! lol my fav to

[sowhiteandnerdyful]

can u sit on it and drive?

[rcWizzard]

To - @sowhiteandnerdyful

No.

[rcWizzard]

To - @sowhiteandnerdyful

No.

[mick0maticNL]

@rcWizzard Offcourse you can just build a propper rollcage and righten up the suspension a bit and go for it !!!!!!!

[rcWizzard]

To - @mick0maticNL

What do you mean by "build a proper roll cage" ??

[Violetcrime]

How is that supposed to help? You didn't explain anything, just showed off the models stating the scale of each.

1/4 scale, for those who misunderstand how scaling works, means the object is 1/4 of EACH of the DIMENSIONS (NOT volume) of the original, 1/4 width, 1/4 length, 1/4 height, meaning the scaled object is actually 1/64th the volume of the original (1/4 * 1/4 * 1/4 = 1/64).

Similarly, the scaled object occupies 1/16th the area (w*l) of the original (1/4 * 1/4 = 1/16).

[rcWizzard]

To - @Violetcrime

Good Grief!!

So if Grave Digger #20 is 16 feet long, how long should a 1/4 scale version be??

It's Not about volume. That's why my 1/4 scale version does not weight 2500 lbs.

[Violetcrime]

@rcWizzard

o.O I have to assume you didn't actually read my post? I said very plainly that it's about dimensions (each, separately), not volume, in an attempt to convey that which your video and description failed to.

Ex. Should average densities be equal, your 1/4 scale model should weigh 156.25 lbs. if the original is 10,000 lbs.

[rcWizzard]

To - @Violetcrime

Well I did, but it was late.

Thanks.

[imthesonofjorel]

@Violetcrime i dont know what you wrote...but i belive you!! why are you on youtube? dont people as smart as you need to be doing something intelligent like the guy in limitless? its hard to soar like an eagle when your surrounded by turnkeys!! and your putting yourself right in the flock of turkeys by going on youtube looking up rc cars videos 8 ) you prolly counted all my grammar and mispelling things on this comment...btw just to get it out there...im a 2 handicap golfer...random i know....yw

[Violetcrime]

@imthesonofjorel Just trust me, I'm totally right. I'm here with MENSA's efforts to ensure only 100% accurate info on youtube. You're right, normally I wouldn't mingle with peons; you all smell like cabbage and beer, even through the internet, but I'm giving back to the community. Trust me; the RC community isn't anywhere near as bad as those weaboo nerds; sheesh. I wasn't going to say anything, but, 14 grammatical mistakes: if I didn't know any better, I'd say you were trying to screw up.

[imthesonofjorel]

@Violetcrime-----ok well i dont know about the your with mensa thing. i dont know/care what it is. no offense to you of course. but im also a good reader of people (excellent holdem player) i dont buy your funny isshh about why your here with mensa....lol.... but i was randomly thinking. maybe you could help me out in life!?! your a smart/maybe wierd 40 year old guy. but if you have connections with someone important. which im sure you do. somehow tell them about me.

[Violetcrime]

@imthesonofjorel MENSA is a group for geniuses (read: better than you in every way). Typically we're too smug and self-absorbed to do anything but turn our noses up, but we've really taken this 'no falsehoods on YT' thing to heart. You're welcome.

As for helping you out in life, I know this guy who dresses like a flying rodent; typically I'd rather hang out with my man Mr. Wayne, but, see, this weirdo has a respectable supply of kryptonite...

[imthesonofjorel]

@Violetcrime 8 ) good for you!! i dont like utility belts!! i dont need one....nor will i ever wear a sachel! as for being better than me in every way....LOL.... give me credit for a few things.... 1 - scratch golfer 2 - until 6 months ago (got a job). the only money i had coming in was from texas holdem winnins at my local card room 3 - anything involving eye hand coordination!! <--- super cereal about that one. but in the long run you'll live longer do too not hurting your body all the time

[Sodiumreactor]

that 1/4 scale looks way to small for that scale....

[TheRevolutionWolf]

I would love that in my garage altough not the grave digger shell maby........naah grave diggers awsome

[trellabor]

It needs a trailer fitted with a small recliner, so you can have it tow you to the corner store for beer. :)

[zacharybg17]

so youre saying the actually grave digger is 4 times larger than your 1/4 scale rc with would mean it would take 4 of yours to make one regular grave digger which is not right it would take like 100 of yours to make a real gravedigger

[rcWizzard]

To - @zacharybg17

WOW!

I don't mean to be rude, but did you have problems with fractions in school?

OK, so looking at the truck in the video how long do you think it is? The 5B is 30 inches long, so lets say my truck is 3 feet long,(that's 6 inches longer) you think the real Grave Digger is 300 feet long? Actually Grave Digger #20 is 16 feet long, so tell me, how long should a 1/4 scale version be?

[blindtoo]

@rcWizzard

Not to be rude, but to answer your question, if the real version is 16 feet long, then your 1/4 scale would be 4 feet long, not 3 feet. 3 feet long makes it a 1/5 scale.

[rcWizzard]

To - @blindtoo

I was using the 5B as a reference. Yes, my GD is 4 feet long.

[HeaDShoTzZHD]

@zacharybg17 No he means 1/4 scale of the 1/10 Scale xD

OMG! I need to stop thinking right now xD

[IMBOOBYFUL]

@zacharybg17 -.- its like 1 to the 4th power

[23JDMHONDAS]

and you have nothing better to do on your day off ? 

[rcWizzard]

To - @23JDMHONDAS

I'm doing it!!!

[MacThizzit]

I miss gravedigger but i dont see mt on anymore

[trapped45]

WOW!! Never seen them that huge before

[mrjdenton]

wat is the point of this vid

[rcWizzard]

To - @mrjdenton

To help the Youtubers that seem to have a hard with what scale means. I got so many comments that my GD was not 1/4 scale, so I compared it to others.

[SASQUATCH109]

1/4 SCALE MY MOTHER FUCKING ASSHOLE.

[rcWizzard]

To - @SASQUATCH109

Good morning class, welcome to Math-101.

Pop quiz today.

If Grave Digger #20 is 16 feet long, how long should a 1/4 scale version of it be?

[SASQUATCH109]

@rcWizzard Whoa hey haha. I'm sorry, my friend and I sometimes share an account so he wrote that.

[kitesandrobots]

@rcWizzard you really think that 4 of those together would be as big as the real deal? That is more like a 16th scale, if that. THIS IS SO FAKE

[rcWizzard]

To - @kitesandrobots

Good morning class, welcome to Math-101.

Pop quiz today.

Grave Digger #20 is 16 feet long, how long should a 1/4 scale version of it be?

[coolentx]

@rcWizzard ooh ooh its 4 ft. long right?

[kitesandrobots]

@rcWizzard Sprite Can X 25 = Grave Digger #20 ?

I think ya need to head back to college, teach'. JKJK Love the work you've doing though!

[TheMysterion01]

@rcWizzard - 4 feet!

[dougransley]

@rcWizzard blue?

[rcWizzard]

To - @eadesryan1

Have you seen parts 20 thru 22?

[iluvmyaxe]

someone makes good money

[D1D1P]

bjpenndotcom liked this

[HUBULLET1]

how much was the 1 4th scale

[rcWizzard]

To - @HUBULLET1

I have not added up all the receipts yet, but around 4k, not including the engine, or labor.

[staggerleeee]

yikes.. lawn tractor tires on the 1/4 scale!! thats serious!

[omgitstheawesomekid]

the 5b looks tiny compared to that thing!

[ihazPB]

lol the 1/4 scale will take someone out no problem

[MyMetalmaniac666]

How big is a 1:16 scale buggy

[rcWizzard]

To - @MyMetalmaniac666

10 to 12 inches long.

[PRacrePerAcre1]

Awesome R/C, I had a savage also and I like the Grave Digger both yours and the real one but those scales do not necessarily mean that they are that size compared to their real counterparts. The large 1/4 Grave Digger model is not a quarter the size of a real monster truck, no way. Neat rides though!

[rcWizzard]

To - @PRacrePerAcre1

Grave Digger #20 is 16 feet long, that's from Dan Bright, the guy who built it, and does my aluminum welding. So how long should a 1/4 scale model be...... Mine is 4 feet long. 1/4 Scale, yes?!!

[PRacrePerAcre1]

@rcWizzard Well then I stand corrected. Do you have videos of the large one performing, I'd love to see it lol.

[rcWizzard]

To - @PRacrePerAcre1

Just fun'ing with you.

Did you see parts 21 and 22?

[PRacrePerAcre1]

@rcWizzard No but I will make sure to check it out.

[ramiejose]

wooooooooooooo hpi 5b

[tafstar156]

so, then the wheels on the real truck should be only 4Xs wider..

[rcWizzard]

To - @tafstar156

Yes. However to be true to scale these should be 3" wider.

[MicahLeviClark]

The 1/5 looks fast!

[xsmokedoutx]

what model is the 1/10 truck?

[rcWizzard]

To - @xsmokedoutx

Modified Clodbuster with JPS Aluminum chassis, gear boxes and axle tubes.

[xsmokedoutx]

@rcWizzard looks killer!

[ganymedeIV4]

your a idiot if you don't understand scale ratios.

I've got a 1:8th scale Yukon Denali with dual 351 speed motors and dual 18.2v batteries!

Too bad my front transmission is shot to hell from trying to climb up stuff, so it makes clicking sounds from the spline gear skippin'