Ever thrown a rod? how about a block?

[turneynicholas]

I think his power train warenty just ran out

[japhethwar]

Is it bad when you run over your own engine. insane

[HUMMVE100]

At 0:17 the driver shit his pants.....

[DBbyDesign]

i once saw a video of a drag racer do that. but the driveshaft twisted the entire frame just before and tore the entire car apart. wonder if someone on here has posted it.

[m35a2pirate]

The tractor threw up an engine!

[goldenguns4u]

just imagine the power that thing created just to do that. Truly remarkable

[madvids100]

Those are some shiny pistons you have their.

[camaro88iroc]

just a flesh wound!

[rustyATV]

Running a little boost?

[Intense951]

They use the glows to start dumbass.

[mrmoparcory]

They run off glow plugs

[lonewolf211]

$500 fine for littering ain't it?

[MrChugwater]

Nothing a few rolls of duct tape can't fix.

[civiclover69]

start er back up, it will be okay

[trahkered]

woow

[chillinkillin0]

holy shit

[brodiegbr]

0:30 - well theres your problem.

[5BobbyDavis]

You could not have just told the story of this blow up.You had to have proof,cause I'd have never believed this without the video.That's just unbelieveable!

[wolfpacguy]

Liu Kang Wins

[jmecrg]

well it had good compression

[glinnz05]

its just a plug wire....

[cougar0n10]

JB Weld. Done.

[garrettwwhite]

never saw one do that, well done?

[St0RM33]

The block was clearly the weakest link here. But anyone noticed the rod that broke to the right. i wonder if that was the initial failure...

[prostreet2]

way too much boost lol

[omegadirective3824]

@tupacX2pak just so you know its a diesel engine and they don't use spark plugs its run off compression

[huckster78]

4 stroke diesels werent ever ment to rev that high

[IDidTheDinosaur]

now me and the mad scientist gotta rip apart the block and replace the piston rings you fried...

[LeeFman909]

@IDidTheDinosaur LOL you're brilliant. xD

[mainman857]

@IDidTheDinosaur no the blocks already riped up:)

[SteelToedTank]

only tool they didn't buy off the snap-on truck was a torque wrench

[Gasser4x4]

Its cummin all apart

[ibdalovely1]

well theres yer problem next time use more duct tape

[plankton371]

Tracer wire is acting up again.

[PhRiZoN]

Bring it back to the garage, I got some duct tape and WD-40, we'll get her running again.

[psymansays]

"Well, that's your problem, right there."

[matrixmotion82]

when you text and drive you can forget that your engine may be making 10,000hp...

[bloggedit]

This is mark from the shop, can you bring your engine back to the garage? I forgot to set the timing.

[p4ndiamond]

Pringles ? once you pop the fun dont stop

[sean5comet]

Fuckin beast

[TravisKilpatrick23]

thank god for AAA :)

[6t5]

Nothing too big. Hell, the check engine light probably didn't even trigger...

[lilmule321]

:O



[RottenCryptStudios]

I can't see a problem little bit of black pepper in the radiator will cure that

[leftlane86gt]

Everything looked normal to me.

[Jafromobile]

Barr's stop leak should fix that right up!

[4mazda2speed0]

well....anyone have any jb weld LOL!!!



[RSwipe179]

Dab of chemical metal and she'll be as good as gold!!

[enroy37]

good,,,,GOD!!!

[walperstyle]

calibrate your torque wrench

[86droptop]

that is the the most funny worst day ever. id call ARP back!

[billyjack70]

@86droptop What does ARP have to do with a block breaking?

[zbenes6741]

So much torque the chas.... well nevermind.

[chevy6723]

that,ll buff right out!



[grizzlyrider2]

umm your engine is layin on the ground

[MrGotsquashed]

h.p.?

[JuDoggin]

Well..... there is your problem.

[adriangale]

nice!!!



[falcon96kickass]

Who needs cylinder heads anyway

[checkfoldcallraise]

hey isnt there supposed to be something holding up those pistons?

[losiboy454]

I've seen this before, it's a cummins diesel, big surprise

[PSXDooMERR]

Rednecks...

[MIXEDWITHFRUIT]

i hate tractors and im not a redneck but i love this kind of power

[ndown15]

meh just due for a tune up jobby

[TupacX2Pak]

It's not even that bad... Just change the spark plugs and go again.

[iThinkThereforeiCan]

My dad's a TV repairman. He has this awwwwwesome set of tools. I can fix this.

[kx85kid12]

So that's the problem

[EdWatts]

That was a good one.

[revolutionday1]

POKEMON!!!!!!

[fishunter112]

If your gonna do it, do it like you mean it. None of that wimpy spun bearing shit...

[1993Ney]

FUCKIN A 

[happymark1805]

LOL, het wordt tijd voor een nieuw blokje

LOL, it's time for an engine rebuild

[mabroussardii]

ooops!

looks like he needs a tune-up

[FedoraJones06]

Nah, that'll buff right out.

[23v0lv32]

@FedoraJones06 lol...lamest most played out car joke ever ahaha thumbs up

[FedoraJones06]

@23v0lv32 ... true... but *somebody* had to say it. LOL

[73ford250]

that guy prolly doesnt have to shave or worry about hair at all after this lol haha

[1IIIIIIIIII1]

BACK TO PLOWIN GARDENS

[TheDjWMD]

shiney pistons :)

[XITroll13]

BAAAHHHHAHAHAHAHA

[BitchenMarsRockstar]

The Rolls Royce shop manuals call this a "Spontaneous, Rapid, Disassembly"

[StabyMcStabsFace]

@BitchenMarsRockstar I LOL'ed

[godgunplay2]

2 bolt main with that much power? jesus tits. im amazed it made it that far.

[avecchi220]

I can't believe I'm the first person to say this but... Well there's yer problem

[SirKowalski666]

@avecchi220 Hahahaha

[krvillotti]

fuckkk



[tommy82sumtoy]

That is amazing!

[RyanChinchilla1992]

You know your a badass when you run over your own engine

[ship660]

Was that a Long or Connor engine?

[keetonbob]

@ship660 Well I can tell ya is now Short and a Gonner! *slaps knee* :)

[Berad9104]

its like the fucking rods were to strong for the block

[PolarisAWD]

She could have made it 10 more feet, but you stopped her short. JK

[mrwindsorpodomous]

go big or go home i guess. wow!

[fatthinslim]

ive seen some engines go but thats got style

[petarjuric]

good to go!

[Aintos]

sounded insane spooling up,

its got some huge rods in the fucker!

[MultiTaketwo]

Keep Going!!!!!!!1

[sr420det]

wow all forged shit too.. there went some $ down the drain!

[003Mexicano]

no biggie, some JB weld will fix this

[grangeroo]

blowt plum up

[KECOG]

Uh, whoopsie....

[livinintheleftlane]

you should always have parts leftover ,this time it was a couple bell housing bolts and some motor mount bolts

[TheTodd2u]

Some dame good head gaskets on that thing.

[vulcanproject]

I didn't know engines were fitted with ejector seats these days

[richardarichter123]

that could be a problem

[SirtubalotTX]

Just get some JB Weld and call it day..

[SenorSpode]

Why PowerStroke it when you can Ram it? I'm Cummins!!! I'm Cummins!!! Oh! Oh!! OOOOOHHHHH!!!

[e2thaj79]

can you say tooooo much booooooost

[buddytazzer]

whoa, so clean!

wtf, fresh build?

[VladBlok28]

that'll buff out

[eselilchoco13]

fuckin clean ass pistons i hope mine are like that lol

[AnimalMother63]

chuck norris was half way around the world, heard this thing start up and didnt want it to ruin family guy so he threw a rock at it..

[TMOSSIFIED1]

time to call AAA...lol

[xrayracer1]

Well, now he has the worlds most expensive wheel chock!!

[brockallentaylor]

Good gawd, those rods were not the weak link. They are so big the pistons look like thimbles on them. Crazy ass nitro people! Awesome!

[kasteman1]

Engine: Enough already! I'm getting out of here...

[Paintballeretek3]

It's not everyday you run over your own Engine!

[G0TGAME55]

in Soviet Russia...

[tonymagona334]

"yeah hi im calling to find out if a blown up engine is covered under my warranty, i have the premium package and all...."

[nosnaeroc1]

so that's what that bolt was for

[HARRYFISFISluvs2RIDE]

I can tell ya one thing that wouldn't have been an issue if it were a honda but just Wrap that sum bitch in some duct tape and she's good as new

[snowman4839]

"... So this is an excellent time to show you those new forged rods I put in!"

[KawhackitaRag]

This is when you start turning the pistons into drink goblets and have everybody present engrave their autograph on the sides of them with an electric pen. The block itself (cleaned up, with all the sharp edges ground smooth) could become a hamster playpen and the crankshaft, hung on a strong string by the shop door, could become the dinner gong for gearheads, when sounded with an appropriate metal rod.

[yorgle11]

@KawhackitaRag There's a guy in my neighborhood who uses a large crankshaft (maybe an I-8, not sure) to hold up his mailbox. Cracked me up when I noticed what it was.

[shitismful]

Holy crap!! I bet he ripped a chunk out of the seat cushion with his buttcheeks on that one.

[Viking445]

@shitismful BWAHAHAHAHAHAHA Fucker i just spit up my Pumpkin Pie!!!

[DavesCarAudio]

oh hey i just ran my motor over.... probably not good

[200159332]

vtec kicked in yo!!

[ROCKNTV1]

chuck Norris would have just leaned over the hood and contained all the parts till the end of the run

[ItsNiceNotRice]

The piston tops are still clean! Lmao!

[xex2kok]

@ItsNiceNotRice

Yea it is probably very similar to auto racing where engines are routinely rebuilt.

[jgmagoo1]

@ItsNiceNotRice Notice NO SMOKE! I'm pretty sure it's running on alcohol. Very clean burning as far as visible emissions and soot go.

[JeremysRants]

lol it mangled the crankshaft

[chromesphere]

Back when I was little and didn't know anything about mechanics, this is what I thought happened 100% of the time when somebody said "I blew my engine" I pictured the whole car going up in a fireball haha...

[coomiekid]

:O

[MrRobnbabs]

now thats blowing up an engine.....never seen one go like that

to much turbo boost?

[stonem907]

@MrRobnbabs I believe that one was pushing over 100psi.

[shagwhan1]

oh no they broke the bonnet pins

[911firefight]

Is it just me but did anyone notice the pins on the piston poking out?. Did some idiot forget to install the keepers?

[djlau1]

@911firefight i notist that aswel xd

[oldthrash83]

get the pit crew together! the next round is in 10 minutes!

[BvlgarigovIT]

were they just racing tractors? Seriously? hahahahaa.

[SUPI2EIVI3]

Red necks.................



[robkal56]

Fastest engine disassembly on record!

[BrewMonkey1]

That guy in the blue shirt is completely unphased by this.

[MattExzy]

that'll buff out.

[TimmyRaa]

Haha, I've not laughed so hard at a bunch of sorry lookin' pistons all dolled up with nowhere to go!

[GMisurdaddy]

Must be a POS cummins

[Menace2Sobriety83]

Shoulda used more sticky tape and glue HYUK HYUK

[eXp0N3nT1aL]

must of been a chuck norris turbo. now they know chuck norris turbos aren't compatible with non chuck norris brand engines ha

[speedy02]

A 6.0 Powerstroke would have held together.

[Skwisgar2322]

@speedy02 That is because it would never make that kind of power.

[Dakattack98]

@speedy02 Yeah you gotta get them to run first. All the 6.0 I've work on are junk.

[motordude1234]

"so, why did you retire?"

"i ran over my engine..."

[rpsmith221]

A little too much pressure in that block.:-)

[ihop54]

So whats she got in her? damn, you could have just told me!!

[88bobo111]

Its ok, nothing a little duck tape cant fix

[dawangprod]

Looks like they forgot the oil pan bolts and the engine just flew off

[SonofJapheth]

the assembler had nothing to do with this. block? tune?

[goodmechanic]

@SonofJapheth It is possible that the assembler had nothing to do with it. Running power adders greatly stress parts. I didn't hear a BO valve for that massive turbo. How many pounds of boost was he running? Was NO2 also used? Either way, ouch!

[adamryanclark]

Looks like that was a fresh build by the way the pistons and rods looked on how clean they were better bet your ass I would be going back to the engine assembler.

[speedmotorsport]

@adamryanclark ROFL, yes, i bet he has a 3 month or 10,000km warantee on a motor that takes 4 seconds to spool up :)

[SenorSpode]

Better call MacGyver. He can weld it back together with 2 twist-ties and a 9-volt battery.

[horayforjoe]

@SenorSpode I dont think that would be welding.

[jrushlow442]

Wow that is amazing! Thats why god himself created JB Weld!

[tattytwo]

cooool

[whitewilliams13]

Some gorilla tape will fix that baby better than new. :D

[gaspower70]

quick way to reveal under the hood

[mangledmess1]

Whell theres your problem!!!!

[shadetreemechanic77]

pop

[GradyRho92]

duct tape fixes everything



[agt155]

skim and a new head gasket and away to go.

[slingingofstars69]

damn that guy kinda got tossed pretty bad in derr