Added: 4 years ago
From: accobrajim
Views: 204,102
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (71)

Sign In or Sign Up now to post a comment!
  • Hello.I'm looking for technical data, diagrams, etc. for Ac Cobra 427. If you have them please answer. Regards Kacper

  • olej mu cieknie pod silnikiem i mostem

  • im confused.. in the title u say its a replica but in the vid u say its just a 66 cobra which is it? :)

  • @tylerwalker2

    a 66 cobra replica. sold long ago

  • id not grab those pipes even when cold. if theyre chrome plated, they will stain with hand prints when they heat up. learned the hard way with my vehicles, and bikes

  • Man that baby is nice

  • how many times have you gotten burned on the exhaust?

  • @gunzfactory

    a gizzilion times. we call them snake bites.

  • I'll take two. ;)

  • I'l take it

  • why did you sell it back? it looked very cool og sound good too! I am asking because I am about ordering a AC replica.

  • where did you get this built? or did you build it youself?

  • Du Sack!

    Ich auch will!!!!

  • Good Sound !

  • whats a replica ?

  • Your fuel pump is on its way out dude.

  • @purge98 We all are, act accordingly

  • Hahahaha replica.........!

  • ooooh, daddy like!

  • $50!!!! (all i hav)...lmfao jk

  • hehe my stepfather has one,

    im dreamin of him let me drive it one time..

    he got the ls1 with some mods in it tho.. runs like hell

  • @KuRo88 A Chevy in a Cobra is like letting Dennis Rodman do your wife, damaged goods. No thank you!

  • @lmorrow4 well, i think in a replica its okay, and in my country we have some laws that forbid most replicas to drive in the citys, so u need a newer engine or a official replica.

  • omg why would you sell this beautiful thing =O

  • Nice car. But I would never buy a replica. Just not the same

  • Looks like there is a leak from the trannie. Why you selling it? Whats motor is in it?

  • Who is the manufacturer of that kit? It is beautiful. Factory Five, Superformance? I think it is really true to the original body dimensions.

  • Nice replica .

  • hola tenes q ver el mio

  • That really is the best paint job for the Cobra

  • that is very nice!!!!!!!!!!

  • bad on the motor pulling it straight out like that but nice anyway.

  • stunning motor.

  • Guys the COBRA is NICE but the Shelby Concept Cobra is being Made Down Under in OZ. Look for DRB 540 on the Net.

  • dont compare the 2.

    45 years ago. b4 u were born!

  • Comment removed

  • Hey, how much did it cost to build the car? I'am curious, as i will build me one when i have the ability to build one, it's gonna be a pretty close Cobra replica that is mostly close in parts and such to the originals were build, what colour, engine e.t.c i will choose is not decided yet, but i will take an aluminum body for the cause of authenthic, the choice of engines imo, will be either 427 Sideoiler or 427 SOHC, depending on. I might be 20, but i will build me one when i can.

  • why would you want to cell that?!

  • none taken. the best is a real one, with just one roll bar !

  • @accobrajim Right? the real AC427 has one.... ahah, ah well, can't fix stupid. Beautiful car, shame you sold it.

  • @accobrajim how much did you sell it 4?

  • @accobrajim wow i would have bought it in a heartbeat

  • I found out my dad is going to build an AC Cobra replica. Planning to put a 420hp chevy V8 in it. Cant't wait. Yours looks fantastic

  • my shop teacher has one of these, its a kit car though, but hes got a 347 stroker off a 302 block, its one bad ass sounding thing

  • hahah my shop teacher just built one too!! and yes they sound soo badass

  • I had a mustang with a modified 351W too. I really miss that thing. Engine described is similar to what I had. Lots of power. My ultimate dream is to get one of these ac's.

  • they are out there, and pretty inexpensive. i will look for another once i sell the vette. i will look for another 351W only!. best power to weight to drivability out there. the 427 guys may disagree, but the 427 is so violent in this car...351 is perfect....very streetable, but will still run a 3.2 sec 0-60. 427 can't do that !....how much faster do you need to be than 3.2?

  • Comment removed

  • How much do u want 4 it?

  • sold it back in jan of 2008

  • there are alot of cars on the planet, all makes , but i think the ac cobra, is the most prettyest car of all time.

  • you got that right....hands down one of the best ever. this car was so much fun to drive....

  • man oh man, i would love to walk into my garage and see that beauty! Cant wait till i can afford one.. soooo sexy!

  • Now im just guesing here but did you get that from factory five?

  • no. actually a BandB roadster product. i prefer their frame construction.  jim

  • how many conmpanies around the world make these cars?

    how expensive is it to own one?

  • very cheap to own. low to no upkeep. i ran 1/2 111 racing fuel and 1/2 93 pump gas. did that just for fun. would run fine on pump gas. so...insurance is cheap if you get the right carrier. no mechanical upkeep. just keep it clean. check the fluids. good gas. have fun.

  • what all did you have done to the engine?

  • 351 windsor. .030 bore. Edelbrock intake and Holley 670. pretty much off the shelf engine from Edelbrock. 425 hp, 400 + ft lbs torque. go to edelbrock website and look at their crate motors. there is one or two just like mine. great choice for these cars, perfect power and rev ability and torque. but not so much that it will not hook up to street. you can spin it off launch as far as you want or hook it up and hold on....good luck ..jim

  • Yeah I know exactly what engine ur talkin about. I run my dads aumototive business and have for around 8 years. I put a zz383 engine from chevy in a 55 chevy with 425 hp. It runs really well. It doesn't idle quite that rough but pretty close, course it has a few more cubic inches and a hydralic roller camshaft rather than a flat tappet, or it'd be extremly rough. Does that engine have a roller or flat tappet? It has a little more camshaft than the 383, course im a ford man myself.

  • roller cam. it was really nice car. i miss it.

  • I seen this car on "DREAMtube" last night. It's amazing!

  • how much???

  • sold it last year.

  • if i had a license and probably the $100,000 it costs, i'd sure buy it! what a gorgeous car.

  • thanks for the comment...get that license!

  • cobro will be back out in fall 2008 at your local ford dealer but westway ford will be first to get it westway ford 801 airport freeway irving texas

  • are you talking about a roadster cobra or just the gt500 kr

  • lol never mind

  • all I have to say is STUNNING.

  • This is the most beautiful car ever. Ive been mad on them since seeing 1 in bad boys the first film! just cant belive youve sold it how could you replace this id cri like a girl. lol

  • FLA. keeping looking. do some research to find what you need. there are many out there. some junk, some good finds.

  • Hi, where did you get this cobra, i am looking a buying one ,Thanks

  • nothing like letting it warm up, how much u selling it for

  • sold it a few months ago. its in new jersey now. thanks..jim

  • Nice car! Why do you want to sell it?

  • I see it's the vette! The vette is nice but I would bet the cobra is more fun.

  • amen...the cobra runs circles around the glass sled...vett is for sale now...looking for another cobra.

  • I've got a game (Test drive unlimited) where you can drive an AC 289.

  • It may be a rep but it's still sweet!!

  • what a beauty, MAN the cobra is just one of the COOLEST cars EVER

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more