12v cummins neutral rev

[crazytard101]

thats a sick truck bro.i got a 96, bhaf,0 plate, 4"exhaust, afc mods.i got the 3kgsk kit and 60lb valve springs yet to put on.need to advance timing as well.you runnin a stock head gasket with 20degrees or just tightened head studs?and how were your egt's with those 370's?

[cursedtofirst45]

@crazytard101

They were hot with the stock turbo, less hot with the stock turbo/18.5 non w/g housing. I found that the housing lowered cruising egts by about 100 degrees at 65 mph. But there really wasn't anyway to get the egts in check with any combination of the stock turbo and those injectors at full throttle. I was running a stock head gasket with the stock headbolts tightened to 130 ft/lbs, which eventually held up to an hx35/ht3b twin turbo set up for a few months before I sold it.

[07POWERcummins]

you got some smoke all over the neighbors house. good shit haha

[69emohater69]

that poor cummins. she sounds filthy. that is not a clean burnin diesel.

[spaniky73]

@69emohater69 That is called soot and it settles to the ground. To get more HP out of a diesel you do what is called over fueling. Which creates the soot. The soot is heaver than normal exhaust gas which spools the turbo faster. The faster that turbo spools the sooner you have power.

[69emohater69]

@spaniky73 and what diesel technology school did you graduate from???

[spaniky73]

@69emohater69 Lots and lots of research.

[rjabin]

3k gsk what is that

[cursedtofirst45]

@rjabin

3k gsk= 3000 rpm governor spring kit. Allows the engine to give full fuel until approximately 3k rpm.

4k gsk: essentially the same, allows full fuel and a broader fuel distribution curve until about 4k rpm. The best modification I've ever done to an essentially stock 12v.

[kalashnikovnut]

BHAF= big honkin air filter. its a large paper air filter.

here are a couple part numbers wix filter 2790, fleetguard filter, AH19037

[GfByZach]

i dont want pussy revs! throw a rock on the gas!

[nevadacoalrollers]

you should make a video doin a burnout or something!

[Scotts98TJ]

nice! i got a 96 dually just curious whats bhaf stand for??

[Scotts98TJ]

@Scotts98TJ sorry to ask twice i thought it didnt go thru the first time

[cummins390]

hell ya

[Belford3FyrFytr]

Sweet truck, what kind of clutch do you have to handle all that fueled torque?

[cursedtofirst45]

@Belford3FyrFytr

13" Valair Kevlar/Ceramic. It held every bit of 435hp/892 ft. lbs.

[85305]

You got those torque/hp numbers with the mods listed in the details?

[cursedtofirst45]

@85305 No, 435/892 was with an hx35 w/ 18.5cm housing, 4k gsk, 370s, no plate, bhaf, 5 inch exhaust, 20 degrees of timing, and tightened headbolts.

[Scotts98TJ]

@cursedtofirst45 whats BHAF stand for?

[dodgedude101]

@cursedtofirst45 ...your runnin stock turbo ??? an wats bhaf ??? never heard of it

[454sskilla]

hey i just got a 12v can someone tell me the best performance to throw in it for cheaper?

[zaku14]

@454sskilla go with a banks turbo even though they can be expensive in some places but itll work for anything try to getthe twin set helps

[85305]

That bitch sounds fucking mean

[Xx69roadrunnerxX]

So with a #0 fuel plate (and other mods) have you roasted your transmission yet?? What trans.? Auto 47RH/RE or NV4500 manual? Sotck trans.?

Just curious, thanks!

[Xx69roadrunnerxX]

Awesome truck!! Love the single turn out stack too!

[SNYD3Rxx4]

truck is sweet, how much u think the #0 plate added???

[kxdirtrider85]

thanks im gettin my first truck soon soill prolly get a 1500 and did u hear tht chevy in 2011 or 2012 is picking up a detroit diesel engine instead of there durmaxes?

[kxdirtrider85]

do dodges hav tranny problems more than any other truck and wat american mde truck is the best?

[crazyp2jimmy]

Yes Dodge has had a lot of issues in the past with trannys, but have gotten better over the years. As for what american truck is the best is really preference more than anything. All have ups and downs. Best motor is cummins tho. :)

[questowner]

ooooo sexy

[DieselGurlz95]

That's a pretty sweet Cummins...liking the stack. That's some pretty rich smoke...you say you got a #0 fuel plate?!?!?

[cursedtofirst45]

yep.

[MrMarq92]

@cursedtofirst45 Where did you buy the plate?

[bassman26]

That's a nice looking truck man-- I really like it. The Cummins logo on the back left is bold but not overbearing. I know it's just a mean truck that is all balls. I need to learn more about your mods, because that's a nice set-up.

-ed

[cursedtofirst45]

Well, im happy to answer any questions you have whenever you're feeling curious.

-Eric

[chevyblows2001]

yeah how much HP you got on there?

[cumminsman101]

haha ok sorry man

[cumminsman101]

was that a true neutral rev looked like a p rev to me anyways nice truck man

[cursedtofirst45]

truck is a 5 speed, so that would be impossible.

[tankimus]

dont look to nervous now

[CDiesel101]

nice truck i wish i could afford one..i just went with a gas 360 unforcently

[mxrider04086]

nice truck where did you get the stack

[cursedtofirst45]

ebay store. $120 or so

[cursedtofirst45]

0 Fuel Plate FF, AFC Housing FF, Starwheel in Stock Position, Anaroid FF, 3k gsk. 5 inch exhaust, 6 inch stack, bhaf.

[cummins12value]

what done to it

[cursedtofirst45]

the stack is 6" but it narrows to 5" at the bottom

[gage44423]

really nice truck man what size is the stack

[mxrider04086]

nice stack where did you get the stack?