I dont know what Nitro R.C to get next. (Im currently driving a TT EK4S2). I want an offroad nitro truggy or stadium truck that is durable, very fast and must handle realy well. Im more interested in offroad racing rather than bashing and i dont want something thats constantly breaking. I dont mind who its made by and my budget is around £500. What would you reccomend please?
im looking for a good starter truck that is good to start with and has good upgrades my price range is from 100-250 any suggestions are helpful thanx electric or gas dont matter
It's been a while since I last bought a brand new RC car, don't they come unassembled anymore. Last one I bought I had to put it together from scratch. Buying it fully assembled takes all the fun and learning out of owning a RC car. You get to know the ins and outs of your car if you have to put it together and it makes it easier when you have to fix it after you break it.
Ah thanks. IMO kits are really the only way to go. Last one I bought new was a Kyosho Outrage and it was a kit. The Outrage was a real dog of a truck and I should have gotten the Associated RC10T at the time.
how proud hes presenting every little part of it =) i know this feeling..you just wnt to rip of the package and look at you great new buy^^ and with this great car i never could be so patient to unpack it so slowly :-P
I wanted one of this rc cars since i was 12 but, never got 1. Now that im 17 and have a job im finally going to get one. How much does this 1 cost also what should i look for in a truggy.
the vrx 1 hobbyport truggy is just as good as this model...even faster and alot stronger. i own both models....this one is just a pretty face to mess up lol
hi i have preveously ordered from your ebay store on ebay and i am extremly pleased with the products i had recived and i was wondering if you have this hyper st in stock but with the exact same shell shown on this vid as would like to buy thx for your time
hi, i bought a couple of hyper st truggies from you guys and they arrived today. 1 works fine the other 1 doesnt. the pull starter gets stuck every time i go to pull it. i had to take the cooling head off to gently tap it back down. it gets stuck every time. it looks like the piston is jaming halfway up the sleeve like its too tight. i even pulled the pullstart off and used a socket to turn the engine over and could only just do it. what do you think would be the problem?
defective engine or your flooding it and its hydrolocking. If it runs then your probably just hydrolocking the engine...and that will damage it or you will break your pullstarter.
i didn't even get it running. couldn't even pull the pull start out 5cm before jamming. they wouldn't fix it so i just bought a new engine. the other 1 we bought fuked up in 4 days. had to get new engine for that 2. the mach engines are rubbish. dont buy off these guys. wont help you
sound like you know fuck all too... bit hard to tune when the fukin thing wouldn't even start or turn over. was getting stuck half way up the sleeve. no way would it even get close to the top. these guys are a rip off!
Thats a good thing you dumb ass. Its called pinch. You were supposed to use like a heat gun or hair dryer to heat up the block and that would expand the sleeve therefore letting the piston get at least to the top so you could turn it over. Sounds like you just dont know what you are doing.
its a good thing is it????? ive been doing nitro for 10 years and im telling you the engine was fucked to begin with. Go and tell your husband you want another kiss will ya!
this guy imdanicklebum made his own boost bottel and iv seen his hyper st on youtube..its running perfect so i think he knos how to tune his truggy .....LOL ur all so stupid if ur gonna post comments lyk dat look at the guys vids first dumbasses then u kno wot to coment on
lol u dumbass they are completely diffrnt engine makes u goon lmfaoo with the macks u can use a boost bottle without drilling the hole if ur brave jeffuckface259952 try fucking drilling a hole into ur carb without damaging it then fuckin talk this guys at least tried wheras u lazy ass prick doin fkall
If you think that his engines are tuned good then more power to you. You can add a boost bottle (that doesnt work) to all the engines that you want. But answer this question for me. Why dont pro rc racers run them????? Exactly. shut the fuck up
Your responses show how immature you are when it comes to nitro engines man. Look at other mach .28s and you tell me how they run compared to his shit motors. The lrp he got sounds horrible. Type in lrp .28 into the search and you will see
lmfaoo why r u havin a fit for an wats the need to write a book its up to u wether u wanna use a boost bot or not lol ur so fuking immature if u think boost bots dnt work then keep it to ur self because its not gonna stop people makin their own btw how can u say the engine sounds horrible all nitro engines sound horrible to me but who cares im not gonna say."dnt buy a nitro engine because it sounds horrible" no but thats wot ur sayin a least let people try man dnt kill it ur such a sad ass
actually boost bottles do in fact work, on any type of 2 stroke engine. most 4 cycle engines already have them designed into the intake manifold. they call it a plenum however. the object of the boost bottle is to provide a volume of pre-metered air available to the engine.when the throttle is snapped open theres enough air and fuel to overcome any momentary lean condition for instant throttle response. all brand name 2 strokes come with them from the manufacture. that should tell u something
how much does this thing cost
nitrorcfreak100 8 months ago
Best of rc unboxing's
MrCaganamata 1 year ago
haha your asian
79colec 1 year ago
the first bag you took out has like many rings what are they i have them too but i dunno what are they for plz reply
xfifx1 1 year ago
I dont know what Nitro R.C to get next. (Im currently driving a TT EK4S2). I want an offroad nitro truggy or stadium truck that is durable, very fast and must handle realy well. Im more interested in offroad racing rather than bashing and i dont want something thats constantly breaking. I dont mind who its made by and my budget is around £500. What would you reccomend please?
leeescott 1 year ago
wow fun you
TheEkomen 1 year ago
how much
famous1ondeck 2 years ago
why you not opening it on christmas day ??
ilovepista 2 years ago
oh you tease!
ScarceOnes 2 years ago
omg.....what a show off !!
dctsolo 2 years ago
better then MGT 3.0?
arsithepspkid 2 years ago
i want one
AlteredMindstate 2 years ago
Bro can u make a video unboxing hobao hyper7 TQ 28 sport rtr
Castillomarcky12 2 years ago
hyper7 Out of stock now
:-)
dinballian 2 years ago
@Castillomarcky12 how good is it compared to other 1/8th buggies and truggies?
TheBladeofaDemon 1 year ago
i think in your description is ready to run not rip ?
ToMBLenCH 2 years ago
Same as Video :-)
dinballian 2 years ago
one of germany's top 200mm nitro drivers is a woman, and a damn hot one too :D
grinde91 2 years ago
cool
dejvijohn 2 years ago
i know 2 girls who loce rc cars. My sister (because i got her into it) and my dad;s freind.
Savagex95810 2 years ago
why is a chick handling a man truck????
theqman13 2 years ago
why so sexist, btw i am actually a man, well teen.
MaderaiderRC 2 years ago
thats not sexist, its kind of true. how many girls do you know that are into rc?
theqman13 2 years ago
fair point but that doesn't go to say that girls aren't allowed in rc
MaderaiderRC 2 years ago
i didnt say they werent.
theqman13 2 years ago
Well u asked y they're allowed 2
MaderaiderRC 2 years ago
a chick handling and/or using an rc is fucking hot man. why you complaining?!
bizarrozero 2 years ago
i fail to see the point of this video
prOducTionsOfBMD 2 years ago
im looking for a good starter truck that is good to start with and has good upgrades my price range is from 100-250 any suggestions are helpful thanx electric or gas dont matter
livtager 3 years ago
try an 'Associted MGT 3.0 Truck'
basswarsmaster00 2 years ago
i got 26 cc zenoah :P
Raja6482 3 years ago
sweet ass kit wat engine is in it and mine was a lot different being mine wAS a dratrax maxium st with a torq 12 engine
clueless9112 3 years ago
It's been a while since I last bought a brand new RC car, don't they come unassembled anymore. Last one I bought I had to put it together from scratch. Buying it fully assembled takes all the fun and learning out of owning a RC car. You get to know the ins and outs of your car if you have to put it together and it makes it easier when you have to fix it after you break it.
Prence 3 years ago
They still sell the pieces, they're called kits, this is an RTR version (ready to run)
CalleUnion 3 years ago
Ah thanks. IMO kits are really the only way to go. Last one I bought new was a Kyosho Outrage and it was a kit. The Outrage was a real dog of a truck and I should have gotten the Associated RC10T at the time.
Prence 3 years ago
MOLA EL HYPER
pepegs2008 3 years ago
does any one know if it comes wit a glow plug ignitor
calpol09 3 years ago
a were is a rcmart
tjohnson016 3 years ago
This has been flagged as spam show
w w w
dinballian 3 years ago
rcmart
dinballian 3 years ago
com
dinballian 3 years ago
how proud hes presenting every little part of it =) i know this feeling..you just wnt to rip of the package and look at you great new buy^^ and with this great car i never could be so patient to unpack it so slowly :-P
Curry4King 3 years ago 5
just waiting for mine to come do you get a glow plug with it?
datehole30 3 years ago
I wanted one of this rc cars since i was 12 but, never got 1. Now that im 17 and have a job im finally going to get one. How much does this 1 cost also what should i look for in a truggy.
hbombfilms123 3 years ago
the vrx 1 hobbyport truggy is just as good as this model...even faster and alot stronger. i own both models....this one is just a pretty face to mess up lol
EvilResistance 3 years ago
Hi guys,
Do you think you got it again in your store ???? Thanks
bilbon63 3 years ago
yup.. we will get it re-stock soon! we will release it as our rc news once it has expected date of arrival.
dinballian 3 years ago
cool i'm waiting for it !!!
bilbon63 3 years ago
It is US$399.99 at rcMart now!
dinballian 4 years ago
hi i have preveously ordered from your ebay store on ebay and i am extremly pleased with the products i had recived and i was wondering if you have this hyper st in stock but with the exact same shell shown on this vid as would like to buy thx for your time
hypa7mach28 3 years ago
Riktigt feet Truggy
empaa12 3 years ago
you can contact Hobao CS for enquiry.
If they accept it is Manufactuer's defect, we can help to replace.
dinballian 4 years ago
hi, i bought a couple of hyper st truggies from you guys and they arrived today. 1 works fine the other 1 doesnt. the pull starter gets stuck every time i go to pull it. i had to take the cooling head off to gently tap it back down. it gets stuck every time. it looks like the piston is jaming halfway up the sleeve like its too tight. i even pulled the pullstart off and used a socket to turn the engine over and could only just do it. what do you think would be the problem?
imdanicklebum 4 years ago 2
defective engine or your flooding it and its hydrolocking. If it runs then your probably just hydrolocking the engine...and that will damage it or you will break your pullstarter.
amsTsi 3 years ago
Could it be turned over at all since you got it?
If it could then you are probably just flooding the engine.
DanielKeane2 3 years ago
i didn't even get it running. couldn't even pull the pull start out 5cm before jamming. they wouldn't fix it so i just bought a new engine. the other 1 we bought fuked up in 4 days. had to get new engine for that 2. the mach engines are rubbish. dont buy off these guys. wont help you
imdanicklebum 3 years ago
Sounds like you just dont know how to tune an engine. The first one was probably just stuck at tdc from the factory.
jeffffej259952 3 years ago
sound like you know fuck all too... bit hard to tune when the fukin thing wouldn't even start or turn over. was getting stuck half way up the sleeve. no way would it even get close to the top. these guys are a rip off!
imdanicklebum 3 years ago
Thats a good thing you dumb ass. Its called pinch. You were supposed to use like a heat gun or hair dryer to heat up the block and that would expand the sleeve therefore letting the piston get at least to the top so you could turn it over. Sounds like you just dont know what you are doing.
jeffffej259952 3 years ago
its a good thing is it????? ive been doing nitro for 10 years and im telling you the engine was fucked to begin with. Go and tell your husband you want another kiss will ya!
imdanicklebum 3 years ago
this guy imdanicklebum made his own boost bottel and iv seen his hyper st on youtube..its running perfect so i think he knos how to tune his truggy .....LOL ur all so stupid if ur gonna post comments lyk dat look at the guys vids first dumbasses then u kno wot to coment on
hypa7mach28 3 years ago
Go look at videos of other hyper st's and other motors like os .21 vspecs and what not and then you tell me if this stuff actually works.
jeffffej259952 3 years ago
lol u dumbass they are completely diffrnt engine makes u goon lmfaoo with the macks u can use a boost bottle without drilling the hole if ur brave jeffuckface259952 try fucking drilling a hole into ur carb without damaging it then fuckin talk this guys at least tried wheras u lazy ass prick doin fkall
hypa7mach28 3 years ago
If you think that his engines are tuned good then more power to you. You can add a boost bottle (that doesnt work) to all the engines that you want. But answer this question for me. Why dont pro rc racers run them????? Exactly. shut the fuck up
Your responses show how immature you are when it comes to nitro engines man. Look at other mach .28s and you tell me how they run compared to his shit motors. The lrp he got sounds horrible. Type in lrp .28 into the search and you will see
jeffffej259952 3 years ago
lmfaoo why r u havin a fit for an wats the need to write a book its up to u wether u wanna use a boost bot or not lol ur so fuking immature if u think boost bots dnt work then keep it to ur self because its not gonna stop people makin their own btw how can u say the engine sounds horrible all nitro engines sound horrible to me but who cares im not gonna say."dnt buy a nitro engine because it sounds horrible" no but thats wot ur sayin a least let people try man dnt kill it ur such a sad ass
hypa7mach28 3 years ago
actually boost bottles do in fact work, on any type of 2 stroke engine. most 4 cycle engines already have them designed into the intake manifold. they call it a plenum however. the object of the boost bottle is to provide a volume of pre-metered air available to the engine.when the throttle is snapped open theres enough air and fuel to overcome any momentary lean condition for instant throttle response. all brand name 2 strokes come with them from the manufacture. that should tell u something
Duckyistrippin 3 years ago
yer u tell that jeb end
05cprout 3 years ago
Good Truggy how much was it?
rashean123 4 years ago