I installed mine and uploaded map in about 2 hours. Installed velocity stacks at same time and cleaned the ins and outs. That 4th injector was a battle but wasn't to hard. Killed a 6 pack and went to work lol
ha ha this guy is ful of shit its so easy plu g and play you dont even need to fully remove the gas tank, you can prop it up and reach ur hand in to route and make connections, and the airbox does not come out thats bullshit too, why would u take that out lol. It took me maybe 45mins taking my time. What a d bag :)
@jmarquez808 The guy removed the secondary butterflies from the throttle bodies that's why the airbox had to be moved and the throttle bodies removed. Otherwise it's an easy job to do.
i put in my pcIII on my 08 1000rr in like 20 min and no it doesnt burn any oil at all either, and installing the power commander doesnt mean the bike is gunna be a whole new 200+ mph speed machine, its main purpose is to just smooth out the engine air/fuel from doin mods like putting on a pipe or intake, you'd prob be lucky to see 5-10 extra horsepower which a lot of people say they notice its considerably faster but thats just a placebo effect, the bike is just running smoother.
funny how some of you say your bike does not burn a drop of oil. honda released a statement saying this particular year bike 2008 cbr 1000rr, burns 3/4 of a quart of oil every 300 miles. hmmm kinda funny. i dont see how you guys dont burn oil. but then again it may only be a certain amount of bikes. my bike burns about a quart every 500 miles. had to put oil in bike every two days. now bike is going to shop to be re ringed.
@HBLADE08 Ummm, buddy. No they didn't. Honda has never ever, ever, ever, ever said that their bikes burn the equivalent to 2.5 quarts per 1000 miles. That would be ridiculous. And don't tell me i don't know what i'm talking about. I've had a new engine put in mine covered under warranty. R-tard.
guys i have the same slip on....it has not an oxygen sensor hole sp i can put the sensor on....whatshould i do with the sensor?it works good with the sensor outside thou...
You would have to be a noob thats really dumb or in your case really slow to connect 3 plugs especially when the pcV doesn't even have a tps connector. Theres no need to remove anything besides the seat and lift up the tank. No need to remove anything else.
Theres also a harness that gives you to pc3 connectors if your using the pcV. Advantage of pcV is the auto tune. I was planning on using b4 I switched to bazzaz bcuz I could self tune anytime I wanted which is good for when the weather changes or I plan on spending the day up in the mountains.
Thats a pretty newbie question. It doesn't go on the top injectors it goes on the bottom. I don't even have a pcV anymore. Switched to a bazzaz. FYI it has 8 connectors that go on all injectors. Took me about 45 minutes from start to finish
guys, do you have oil problems with the bike? because my bike does not have. I have exactly the same and does not burn a single drop. There are many who say that the 08 blades, burning oil. I insist that everything depends on how you treat the bike. indeed, very nice bike.
I have no problems with oil. Had the recalls done with clutch and a small clamp, thats it. Earlier models needed this but later models were fixed on the assembly line.
@will3020 You, my friend are full of crap. A person with down syndrome could install a powercommander on this bike in less than 3 hours. I did mine in 20 mins with no experience with bikes at all. I followed directions.
lieing ass SOB dont have to remove or touch the airbox for a PC3 you have to remove the airbox for an ignition module only. hate these people who try to make this sound so "technically complicated"
This guy is sooooo wrong. Its not that hard at all if you have some idea on what you are doing. I never installed a power commander before and had no problem doing it to my 08 1000RR.
I agree, I had to remove the seats, tank cover & side covers but didn't remove the fuel tank completely or touch the airbox. I used 2 flathead screwdrivers to undo the throttle position sensor and reconnect. First install for me too.
ugly ugly ugly...i have an 06 600rr , i love honda, i hope the new design 600rr's dont take on this look, far as i know a lot of people are disappointed with this new look. i was really lookin foward to getting a new 1000rr but if i do looks like im stickin with an 05-06...
I installed mine and uploaded map in about 2 hours. Installed velocity stacks at same time and cleaned the ins and outs. That 4th injector was a battle but wasn't to hard. Killed a 6 pack and went to work lol
MrBlackem1 1 month ago
kkkkkkkkkkkkk
929kowal 3 months ago
You need to do a video using the super tuner pro on a Harley. Thanks. Love your videos.
michaelwright00747 3 months ago
Sounds like someones playing with paintball markers in the background
budha59 5 months ago
ha ha this guy is ful of shit its so easy plu g and play you dont even need to fully remove the gas tank, you can prop it up and reach ur hand in to route and make connections, and the airbox does not come out thats bullshit too, why would u take that out lol. It took me maybe 45mins taking my time. What a d bag :)
jmarquez808 7 months ago
@jmarquez808 The guy removed the secondary butterflies from the throttle bodies that's why the airbox had to be moved and the throttle bodies removed. Otherwise it's an easy job to do.
CBR11X 3 months ago
i put in my pcIII on my 08 1000rr in like 20 min and no it doesnt burn any oil at all either, and installing the power commander doesnt mean the bike is gunna be a whole new 200+ mph speed machine, its main purpose is to just smooth out the engine air/fuel from doin mods like putting on a pipe or intake, you'd prob be lucky to see 5-10 extra horsepower which a lot of people say they notice its considerably faster but thats just a placebo effect, the bike is just running smoother.
lightbulb2ko7 10 months ago
funny how some of you say your bike does not burn a drop of oil. honda released a statement saying this particular year bike 2008 cbr 1000rr, burns 3/4 of a quart of oil every 300 miles. hmmm kinda funny. i dont see how you guys dont burn oil. but then again it may only be a certain amount of bikes. my bike burns about a quart every 500 miles. had to put oil in bike every two days. now bike is going to shop to be re ringed.
HBLADE08 11 months ago
@HBLADE08 Ummm, buddy. No they didn't. Honda has never ever, ever, ever, ever said that their bikes burn the equivalent to 2.5 quarts per 1000 miles. That would be ridiculous. And don't tell me i don't know what i'm talking about. I've had a new engine put in mine covered under warranty. R-tard.
Tehrhorn 10 months ago
guys i have the same slip on....it has not an oxygen sensor hole sp i can put the sensor on....whatshould i do with the sensor?it works good with the sensor outside thou...
gdudetool 2 years ago
@gdudetool lol, no it doesn't. Read the forums my friend. You have an incorrect AFR reading.
Tehrhorn 10 months ago
3 or 4 hour job!?! It took me 25 minutes to install my pcV on my 08.
BiggsTiTan 2 years ago
you probably did it wrong lol
rebelsouljaz 2 years ago
How can you do it wrong? Its 3 connectors and two of them are different. Its strictly plug and play. I guess I'm better that the "average guy."
BiggsTiTan 2 years ago
or you think you are and you really fucked up by not realizing there's other things you gotta do besides that LOL
rebelsouljaz 2 years ago
You would have to be a noob thats really dumb or in your case really slow to connect 3 plugs especially when the pcV doesn't even have a tps connector. Theres no need to remove anything besides the seat and lift up the tank. No need to remove anything else.
BiggsTiTan 2 years ago
@BiggsTiTan exactly this dude is selling his service.. i went to take a shit and my friends finished it by time i was done!!!..
neek601 2 years ago
Im sure anyone on here who has an 08-09 cbr1k and has installed a pcIII or pcV can say the same thing
BiggsTiTan 2 years ago
pc 5 and pc3 are two different things 5 sucks 3 usb is fucking awsome
hondabound 2 years ago
Theres also a harness that gives you to pc3 connectors if your using the pcV. Advantage of pcV is the auto tune. I was planning on using b4 I switched to bazzaz bcuz I could self tune anytime I wanted which is good for when the weather changes or I plan on spending the day up in the mountains.
BiggsTiTan 2 years ago
did u put it on the top fuel injector
hondabound 2 years ago
Thats a pretty newbie question. It doesn't go on the top injectors it goes on the bottom. I don't even have a pcV anymore. Switched to a bazzaz. FYI it has 8 connectors that go on all injectors. Took me about 45 minutes from start to finish
BiggsTiTan 2 years ago
This modification was done in mid March '08 when the this bike was just released.
will3020 2 years ago
guys, do you have oil problems with the bike? because my bike does not have. I have exactly the same and does not burn a single drop. There are many who say that the 08 blades, burning oil. I insist that everything depends on how you treat the bike. indeed, very nice bike.
davitolucas 2 years ago
I have no problems with oil. Had the recalls done with clutch and a small clamp, thats it. Earlier models needed this but later models were fixed on the assembly line.
will3020 2 years ago
I am pleased that you have no problems with the bike. and thanks for reply.
davitolucas 2 years ago
@will3020 You, my friend are full of crap. A person with down syndrome could install a powercommander on this bike in less than 3 hours. I did mine in 20 mins with no experience with bikes at all. I followed directions.
Tehrhorn 10 months ago
so what exactly was the amount of hp/tq increase with the power commander zeroed compared to using the custom map?
GOfmf 2 years ago
I'm guessing the Harleys are always rich becasue 99.9999% of the bikes get after-market exhaust installed right away. Right?
gregger454 2 years ago
I have one, love it!!! Full yoshi exhaust, power commander and undertail...sick looking
grcunit 3 years ago
how dare he lay dirty hands on that pristine piece of machinery =D awesome bike!
Jayman898 3 years ago
lieing ass SOB dont have to remove or touch the airbox for a PC3 you have to remove the airbox for an ignition module only. hate these people who try to make this sound so "technically complicated"
jardis6666 3 years ago
my 08 cbr1000rr is so fast couldnt imagine trying to make it any faster man
RuBerSideDwn 3 years ago
This guy is sooooo wrong. Its not that hard at all if you have some idea on what you are doing. I never installed a power commander before and had no problem doing it to my 08 1000RR.
cbrguy77 3 years ago
I agree, I had to remove the seats, tank cover & side covers but didn't remove the fuel tank completely or touch the airbox. I used 2 flathead screwdrivers to undo the throttle position sensor and reconnect. First install for me too.
brave0ne 3 years ago
I'll venture to say maybe anywhere between 5-15 lbs....
will3020 3 years ago
this bike is already so light, how much weight would be saved with an aftermarket exhaust eliminating the cat?
MasterViolet 3 years ago
ugly ugly ugly...i have an 06 600rr , i love honda, i hope the new design 600rr's dont take on this look, far as i know a lot of people are disappointed with this new look. i was really lookin foward to getting a new 1000rr but if i do looks like im stickin with an 05-06...
svt0304cobra 3 years ago
I didn't like them till I saw one in real life. Put a fender eliminator on it and a pipe and it looks sweeeeeeeeeeeeet.
cjake9 3 years ago 3
Same here! And now I own one!
cbrguy77 3 years ago
that is...stock. With PC III you'll get slighter less due to the increase fuel to the engine.
will3020 3 years ago
No actually according to Honda Co. the 08' 1k CBR will give you 36.6 mpg.
will3020 3 years ago
How much gas usgae increase are we talkin ?
The bike now hovers around 42mpg
bigstock20 3 years ago
Thanks for posting the video! That was educational and interesting. :)
phoenixar 3 years ago
Amazing !!!
I will put this combo, the powercommander and the two bros exhaust on my 2008 Fireblade :-)
Greetz from germany
Mario
ironblader 3 years ago
be careful the shit's fast :):)
MtK123456789 3 years ago
great job guy's
supraking21 3 years ago