C905 Disassembly

[originxxx]

I assume this video is on youtube as a link from somwewhere else. However if you're going to go inside a c905 this video is very good and complete. Just fixed my lens cover problem.



[unDunkan]

а собрать обратно слабо??

[josepca89]

excellent and very detail video, the best

[MazineBabie]

Hallo mir ist mein Handy eute runtergefallen. Wo sitzt die Antenne? Da ich jetzt nicht mehr telefonieren kann..

[JakeTheBeck]

how do you remove the sliding mech?

[TheMoisex01]

Thumps up if you did it without the tools :D

[waldinator13]

Hallo :) Bei mir ist die Anschlussschnittstelle irgendwie ausgeleiert oder so. Wenn ich ein Ladekabel anschließe, funktioniert es nur, wenn ich es festhalt, bzw. komisch nach oben halte. Die Köpfhörer haben somit einen Wackelkontakt und auf das PC-USB Kabel reagiert er garnicht.Kann man diese Buchse überhaupt ausbauen, und ersetzen? weiß das jemand?

[tezcatlipoka80]

danke hat mir sehr geholfen

[Thegreyraccoon]

at 4:28 what size screw drivers are these?

[OriginalWagner]

Hallo, ich höre nichts aus der hörmuschel, habe die jetzt getauscht, ist aber immer noch stumm. Kann nur an der platine liegen oder?

[Trompetenkopf]

@OriginalWagner bieg mal die beiden kontakte der hörmuschel in richtung display. wenn das nicht funktioniert kannst du das flexkabel für ca 10 euro ersteigern

[CERVEZAXXI]

Gracias... thank you

[bIackbunny]

Thank you for this Tutorial. Because of that, my boyfriend was able to assembly my old mobile and it finally works. It looks like a bi***, but it works! Awesome!! :D I'm sooo happy!!

Thanks a looot!

[bIackbunny]

Danke für das Tutorial, mein Freund konnte dadurch mein altes Handy wieder zusammen setzen und es funktioniert wieder. Es ist zwar krumm und schief, aber es funktioniert! Toll! :D Ich freuuu mich!!

Dankeschööön!

[FuckTheCrime]

welches teil ist da um den slider zu erkennen ? also wann er zu geht und auf geht?

MFG

[Seminarstellung]

@FuckTheCrime

in meinem fall werden die farben auf dem display pink und bläulich. wenn ich nach ner weile wieder öffne, ist alles normal. es zieht wohl auch ziemlich strom. hattest du das gleiche problem? bei mir sind stränge am sliderkabel leicht durch den slider durchgewetzt. liegt es daran oder an der öffnen/schließen erkennung? wäre cool, wenn du mir da weiterhelfen kannst. gruß

[tyranus7]

Thanks, this helped me a lot!

[LoBodomy666]

BEST intructions EVER  excelent job thanks for the guidance :)

[LoBodomy666]

BEST intructions EVER excelent job thanks for the guidance :)

[willmckeand]

Can anyone please tell me the size of the Torx screws on the front of the phone underneath the slider? -- 4:30 -- the bigger silver ones at Torx size T6 but i need to buy another tool to undo the other smaller ones can anyone please help me with the size? Much appreciated!

[zgherlos2]

@willmckeand it's a philips screw

[LosieQ94]

Where is bluetooth modul ?

[svhcu]

I agree with bicnarok with a need for an explanation about how to replace the fast port.

It gets bent inward from the pins on the charger and will not connect to the charger.

All that is needed is to be able to access the back so you can press the metal outward again. But is this possible.

If not, How do you replace the charging block?

[motormadeuan]

do i have to take the whole mobile apart to change the back facing because i have broken it and i am not got at electricals.

[bicnarok]

Top video. But I can´t see anyway to check or repair the fast port connector which appears to have broken on my sons C905. Can´t charge the phone, connect to pc or use earphones which makes it pretty useless aghh. Any tips on this, and whether I can solder it back on if the connector is broken.

[EmpirePGL]

@bicnarok i have that problem 2 ... hope that it will doesnt crash again

[ttoommyy10]

Thanks

[transdetendal]

very nice vid ,mucho pro.*****,gracie

[rerunclone]

Nevermind. apparently part of the housing i received was defective. Not sure how, i guess it has contacts or something, but the original worked when i put it back. Only posting this in case anyone else has similar problems

[rerunclone]

First of all, great video! I used this video to change my phone cover. My only problem is now, my slider doesn't work. It will slide but it won't answer calls or lock/unlock the keys. And the lower keys won't light up. It's as if the phone think the slider is always down. I followed the directions to the "T" and i can't figure out what's wrong, any ideas? I'm not new to electronics but i'm lost. I can't even find anything that looks like it would make the slider know which position it is in.

[r1979t]

How can you fix the ear phone speaker?

[Gdulski]

This is the original instructions from the sonyericsson!

[TheTubeLine]

WOW-What A professional educational training video, beautiful relaxing too - thank you - It will help me replace my old housing - Good luck with your future videos,a grateful viewer, Peter

[GUSMAX14]

Wow! What a Clean Job men. Congratulations.

[tusselchen]

thanks very much, thats a quite helpful guide, my c905 is repaired right now.

[EllementDj]

thank you

[SiReX1985]

NiCe...in 6 days it will help me because i will buy the destroy parts...thanks

[Eliottomas]

this is awesome i bot a parts phone off eBay and with this i was able to fix my old one thanks to those who put this together

[cs512tr]

now i can fix my earphone speaker issue

[r1979t]

@cs512tr didi you fix the earphone speaker?

[cs512tr]

@r1979t

yes, thanks mate.

worked well

[r1979t]

@cs512tr I have the same problem as you can you tell me how you fix it?

[cs512tr]

@r1979t

hey cool.

the 'earspeaker' itself was fine, it was the flex cable that was the culprit.

easily replaced with the vid here.

pay attention to the vid, especially when trying to remove the top cover.

cheers

part was called "C905 TOP KEY FLEX'

[r1979t]

@cs512tr is it the same as the flex cable?

[cs512tr]

@r1979t

it is the flex cable

proper part description is "C905 TOP KEY FLEX"

[kaptisharad]

Hii....i just disassembled my phone.....it wasnt working in the previous case....because my phone got drenched....but when i opened my phone thinking i could make my phone dry....but it was already dry....still my phone is not working.....can you give me any solution to it.....i am very sad on loosing my phone...any help would be highly appreciated!!

[Ixtlicoatl]

If you have a C905, this is the best video. Thank you so much for this aport. It was so useful for me

[barney2229]

This video is great very clear thanks very much :)

[godimperial]

soo cool man

[Par4niacRespawn]

can someone help me? when i press the up button it kinda feels like i didnt press it although i have. its kinda annoying :P

anyone know how i can fix this?

[AlphaDork11]

@Par4niacRespawn you cant fix it. It seems that some of the phones have annoying problems like that, (buttons w/no feedback) and the phone turning on and off, and freezing, and the fastport connections go out etc... The way to fix it is to wait for something else bad to happen, and then send it back if its under warranty. If its not, then do your research before you buy another Sony phone. It would seem they have been sub-par in terms of quality control lately. :(

[666volunteer]

Can someone tell me how bright the xenon flash is?

is the flash like an "actual" camera flash?

[AlphaDork11]

@666volunteer yes, it is much brighter than the led flash, but it drains the heck outta your battery. And with numerous quick shots, sometimes you have to wait for the flash to re-charge.

[ShenmueJKD]

thanks i changed the wifi now it works again!!

5:43 helped me!!

[thetmaxx]

Had to replace my camera for inop focus, and bad keypad.

Some extra tips...

@ 5:20 the serial number sticker was stuck to the phone's MOBO. Almost couldn't pull the back cover off without removing the sticker first.

@ 1:45 Make sure when you reinstall this cover you hook the bottom first. Then clip the rest down.

They didn't show the keypad removal, it just peels off the frame it's on with 3M adhesive. It is the same part as the camera button and that connector.

My C905 is working again!

[WielkiPolskiPatriota]

I tried tha same at home...and when I finished..4 parts left...:/ phone is not working...:/

[zbyszek1]

@WielkiPolskiPatriota

Spieprzyles kolego. Trzeba bylo zostawic to specjalistom.

[WielkiPolskiPatriota]

@zbyszek1 zartuje oczywiscie. kupilem nowa obudowe i myslalem ze sobie sam wymienie...ale jak zobacyzlem jak sie to robi to zrezygnowalem i zanioslem do servisu..hehe. pozdro.

[Malfie900]

Great video!

Fixed my C905!

The * button was sticky, disassembled it, cleaned it, and it works fine now!

Thnx!!

[wizardxrc]

Been opening-repairing Se phones for long time now, but this particular model is like "Don't try this at home !!!" . Very complicated design, but what do u expect from a slide up-8mpx-gps-wifi phone ?

[binhoservice]

ho my god!!!!!!!!!

[DenisTerror]

this was shocking for me..i would never do something like that to my w995 or to any phone..

[flyviggen]

Very useful: I've to change the tft on my C905. I've bought it for few euros on ebay and now i know how to operate...

[stoinaer]

Hm...quite interesting to watch, but what is that good for?

[NokiaN95Freak]

great =)

[ALLCITYMAUD]

acidtox - incase you need to repair something like i do right now

[danthealiguer]

el forence

5*

[AciDToX8]

why would you do something like that?

[Unsueue]

that hurts.

[alfr9999]

This phone should contain dynamite inside, in order to explode when its operated by a robber or when someone is changing the imei.

[peramatiotis21]

WTF?!?!?

[osamaq1]

ohhh he broke media swich

[Moorhuepfer]

Vielen Dank, Sehr hilfreich!! :-))

[7009979]

thanks Bro..

Good bro...............

[kumarravi3]

I was changing the housing of my phone... I followed the instruction, but now have a little problem putting it back together.

When I re-install the sliding piece at 4:01, its getting stuck and hardly slides. Do you know what might be the problem?

[lopezitos69]

Hi, I have a problem with this C905 Phone, I order to make a phone call I have to have the speaker on otherwise whoever is in the other line wont be able to hear me, in a few words, microphone do not work... How can i fix it?

[sniperacs]

my C905 has both covers scroud from inside-way of the phone.

here enginer slide top one off puling downwards. my got 2 scrous :/

[antagligenkanske]

What time on the clip can you se the earpiece? I cant se what piece it is! ;)

[crossy0888]

the metal bit on bak of slide what is that called thanks

[jakovd]

michael.

[SicklySlick]

could you tell me how to take the backcover off??

[GarethWonfor]

Zen like... a master at work!

[B4DC0]

Great Video, Really Helpful, Just by following it i managed to change my earpiece...Thanx

[driftkingkapuch]

omg ;O [*]