@alexmends09 It's treated me VERY well. I have friends who have the M&P's and love them as well. You think the rifle looks good in this vid, go check out the update video. Let me know what you think. Thanks for the comment.
why do alot of people have bad things to say about bushmaster?(serious question)i am looking into buying a AR with the bushmasters can change out upper and lower receiver if you wanted to?any info on buying an AR you could give me would be appreciated I want a more custom weapon im not sure if i piece by piece it or buy a naked AR and customize from there
please any information you would share will be awesome thanks
@ninjasoul69 I have more than a handful of friends who have them and have fired many thousands of rounds and they never disappoint. AR's are mil spec so it's all personal preference really. If I had to choose another line of AR-15 it would either be RRA (Rock River Arms) or Spike's Tactical which some of my friends have. But that's me. Piece by piece will be more expensive I've found but again, it's all in what you're looking for in an AR. But Bushmaster's have ALWAYS been great.
Nice AR man, but i was looking threw one of the eotech holographic sights and it cost $400 dollars and the red dot sucked on it. I was all fuzzing and wasnt clear at all. But just wanted to give you a heads up.
@amoneypro199 You may want to make sure it isn't a clone man. EoTech's are not that way. Best place to get a great deal on one is a local gun show. I go in with my phone on me so they'll compete with what I pull up.
Yeah man. The EoTech I got is a very good optic sight. Very accurate and easy to allign with the rifle. Expensive but if you're buying a firearm for your protection, you should not be cheap about that kind of stuff.
Awesome looking AR bud, you really installed some nice equipment on there. I personally like and own a Bushmaster and have a 4x32 Acog mounted up top. I love it, im about to instal a free floating quad rail by Yankee hill, its the specter length. Looking at going with the flat dark earth products by magpul. They make some really nice stuff. Your comments on stocking up on ammo are very correct, its better to have and not need than to need and not have. Im also buying in bulk also. Nice video...
@LovingGlocks Thanks a lot man. The rifle has recently been transformed into a two tone dark earth/black scheme as a matter of fact. My Dad got the fever for AR accessories, so he bought everything in dark earth and I just gave him all of my black accessories. Couldn't have worked out better! I just bout a WASR-10 and a thousand rounds of Tul Ammo for it as well. As soon as I can dump the hard drive on our mini cam I plan on doing an update vid on the AR and a vid on the AK.
also check into sanding and polishing the slide. i did and very nice looking! and also you can put white lettering in the glock with a white crayon, i have a glock 19, with the stainless steal guide rod and a punisher symbol for the slide plate.
if you dnt have a gas piston conversion? its a great investment and mod. im getn a windham weaponry ar 15, m4 carbine 5.56, i plan on doing it b4 i even fire the weaponry. trust me... check into it.
@TheFloridaboy86 I've seen a couple of guys do that but haven't really thought too much about it. I just installed a Geisselle SSA Trigger and Spike's Tactical Nickel Boron BCG so I'm looking for more reasons to upgrade. I really need to update the vid because it looks totally different now.
@bhouse1545 Great suggestion. I've looked at the Spike's Tactical BCG and also the BCM BCG. I need to shoot an updated vid with the newer additions but I hate to start over with the views!
@bhouse1545 Looks like I'm going to be running with the Spike's Tactical Nickel Boron BCG. Everything I've now read and seen let's me know that the NiB BCG's are far superior to the phosphate coated BCG's. Thanks again for the push.
Thanks for the heads up. I've viewed many of those similar types of vids but I just can't bring myself to the coloring yet. I really need to update this video due to some more great upgrades. Thanks again pal.
@2012skunkape either with modeling paint or crayon, check out my colored in ar-15...all you need is a blow-dryer, napkins, crayons, and yourself. model paint can be done with toothpicks. it'll make your stamping/engraving stand out.
Great job! Well put together video. I put a gun together in about 2 weeks and have only shot it once after owning it for almost a year now. Makes me want to get it out of the case and at least touch it again!
Thanks man. I just installed an Enidine AR-Restor Hydraulic Buffer and a "Molon Labe"(Come And Take Them) laser etched ejection port door from Spike's Tactical on the Bushy and am getting ready to throw a MP tested shot peened mil spec BCG(Bolt Carrier Group) from Daniel Defense. And I just had a Glock armorer install an extended slide and mag release on the Glock .40. May film an updated video in more detail of the AR but would like to wait until I get the ideal optics upgrade added on.
Great video bro!!
Kmacierz 6 days ago
How has the xm15 treating you? I'm leaning more towards this, my other option is the S&W MP 15orc. Nice rifle!
alexmends09 2 weeks ago
@alexmends09 It's treated me VERY well. I have friends who have the M&P's and love them as well. You think the rifle looks good in this vid, go check out the update video. Let me know what you think. Thanks for the comment.
2012skunkape 2 weeks ago
Am getting one like that
issachar1984 3 weeks ago
make more videos
DeltMarines 4 weeks ago
@DeltMarines Hahaa just dumped mi mini cam onto the external hd so I plan on doing just that VERY soon. Looking quite forward to it. Thanks
2012skunkape 4 weeks ago
why do alot of people have bad things to say about bushmaster?(serious question)i am looking into buying a AR with the bushmasters can change out upper and lower receiver if you wanted to?any info on buying an AR you could give me would be appreciated I want a more custom weapon im not sure if i piece by piece it or buy a naked AR and customize from there
please any information you would share will be awesome thanks
ninjasoul69 1 month ago
@ninjasoul69 I have more than a handful of friends who have them and have fired many thousands of rounds and they never disappoint. AR's are mil spec so it's all personal preference really. If I had to choose another line of AR-15 it would either be RRA (Rock River Arms) or Spike's Tactical which some of my friends have. But that's me. Piece by piece will be more expensive I've found but again, it's all in what you're looking for in an AR. But Bushmaster's have ALWAYS been great.
2012skunkape 4 weeks ago
Nice AR man, but i was looking threw one of the eotech holographic sights and it cost $400 dollars and the red dot sucked on it. I was all fuzzing and wasnt clear at all. But just wanted to give you a heads up.
amoneypro199 1 month ago
@amoneypro199 You may want to make sure it isn't a clone man. EoTech's are not that way. Best place to get a great deal on one is a local gun show. I go in with my phone on me so they'll compete with what I pull up.
2012skunkape 1 month ago
@amoneypro199
Yeah man. The EoTech I got is a very good optic sight. Very accurate and easy to allign with the rifle. Expensive but if you're buying a firearm for your protection, you should not be cheap about that kind of stuff.
f0ngtasticXD 3 days ago
Awesome looking AR bud, you really installed some nice equipment on there. I personally like and own a Bushmaster and have a 4x32 Acog mounted up top. I love it, im about to instal a free floating quad rail by Yankee hill, its the specter length. Looking at going with the flat dark earth products by magpul. They make some really nice stuff. Your comments on stocking up on ammo are very correct, its better to have and not need than to need and not have. Im also buying in bulk also. Nice video...
LovingGlocks 1 month ago
@LovingGlocks Thanks a lot man. The rifle has recently been transformed into a two tone dark earth/black scheme as a matter of fact. My Dad got the fever for AR accessories, so he bought everything in dark earth and I just gave him all of my black accessories. Couldn't have worked out better! I just bout a WASR-10 and a thousand rounds of Tul Ammo for it as well. As soon as I can dump the hard drive on our mini cam I plan on doing an update vid on the AR and a vid on the AK.
2012skunkape 1 month ago
also check into sanding and polishing the slide. i did and very nice looking! and also you can put white lettering in the glock with a white crayon, i have a glock 19, with the stainless steal guide rod and a punisher symbol for the slide plate.
TheFloridaboy86 1 month ago
if you dnt have a gas piston conversion? its a great investment and mod. im getn a windham weaponry ar 15, m4 carbine 5.56, i plan on doing it b4 i even fire the weaponry. trust me... check into it.
TheFloridaboy86 1 month ago
@TheFloridaboy86 I've seen a couple of guys do that but haven't really thought too much about it. I just installed a Geisselle SSA Trigger and Spike's Tactical Nickel Boron BCG so I'm looking for more reasons to upgrade. I really need to update the vid because it looks totally different now.
2012skunkape 1 month ago
one of the reasons i dislike living in california. thumbs up on you ar.
03ephatch 1 month ago
Best A.R. video ive seen yet man good job very informative.
Cambo212 1 month ago
@Cambo212 Thanks a ton man. I REALLY need to shoot an updated vid. MANY awesome upgrades have been made. Tricked out AK vid to come soon also.
2012skunkape 1 month ago
@Cambo212 Thanks for the compliment. You do live in a beautiful state.
2012skunkape 1 month ago
HAPPY FESTIVUS...
TheJackyBear 2 months ago
@TheJackyBear "A Festivus for the rest of us!"
2012skunkape 2 months ago
Thanks for that. Much has been done since the vid. Part 2 vid coming soon. Merry Christmas and vote Ron Paul in 2012!
2012skunkape 2 months ago
Nice bro...ar are one of da best
052187ful 2 months ago
nice man...
TheJackyBear 2 months ago
@TheJackyBear Thanks a lot. Ron Paul for prez!
2012skunkape 2 months ago
@2012skunkape Roger That!!!
TheJackyBear 2 months ago
@TheJackyBear Thanks man. Merry Christmas and vote Ron Paul!
2012skunkape 2 months ago
AWESOME gun!!!
SundayBMX007 3 months ago
@SundayBMX007 Thanks man. I need to make an updated vid with the most recent updated and/or additions.
2012skunkape 3 months ago
@SundayBMX007 Thanks.
2012skunkape 3 months ago
Awesome video man thanks
zlcox95 3 months ago
@zlcox95 Thanks.
2012skunkape 3 months ago
definitily get a spikes tactical nickel boron bolt worht the buy.
bhouse1545 4 months ago
@bhouse1545 Great suggestion. I've looked at the Spike's Tactical BCG and also the BCM BCG. I need to shoot an updated vid with the newer additions but I hate to start over with the views!
2012skunkape 3 months ago
@bhouse1545 Looks like I'm going to be running with the Spike's Tactical Nickel Boron BCG. Everything I've now read and seen let's me know that the NiB BCG's are far superior to the phosphate coated BCG's. Thanks again for the push.
2012skunkape 2 months ago
This has been flagged as spam show
@2012skunkape great that bcg is amazing you will love it
bhouse1545 2 months ago
The MagPul B.A.D Lever. Get you one!
2012skunkape 6 months ago
what is that attached to the bolt catch?
Otaku422 6 months ago
Thanks. I've done more to it in the past six months. As soon as I upgrade my optics package I'll be sure to update. Thanks again.
2012skunkape 6 months ago
nice ar
truepyro28 6 months ago
Thanks for the heads up. I've viewed many of those similar types of vids but I just can't bring myself to the coloring yet. I really need to update this video due to some more great upgrades. Thanks again pal.
2012skunkape 8 months ago
Great vid man!
LouieTactical 1 year ago
you have got to color that snake in! awesome video though...check mine out...doing a build piece by piece.
efd5803 1 year ago
@efd5803 What do you mean by "color that snake in"?
2012skunkape 1 year ago
@2012skunkape either with modeling paint or crayon, check out my colored in ar-15...all you need is a blow-dryer, napkins, crayons, and yourself. model paint can be done with toothpicks. it'll make your stamping/engraving stand out.
efd5803 1 year ago
@efd5803 Are there any vids on youtube showing it being applied?
2012skunkape 1 year ago
@2012skunkape check out "Tacticrayola" for the coloring in part. I think there is an AWESOME youtuber with a video on it ;-)
mhayd990 8 months ago
Nice Ar! After watching your vid I will be upgrading my badger latch for the bcm gunfighter charging handle! Again nice!
dundeal1980 1 year ago
great video, keep em' coming
explicitkennels 1 year ago
nice build ill have to get a vid of mine up
SOLOK1LLA 1 year ago
Great job! Well put together video. I put a gun together in about 2 weeks and have only shot it once after owning it for almost a year now. Makes me want to get it out of the case and at least touch it again!
rb101063 1 year ago
Thanks man. I just installed an Enidine AR-Restor Hydraulic Buffer and a "Molon Labe"(Come And Take Them) laser etched ejection port door from Spike's Tactical on the Bushy and am getting ready to throw a MP tested shot peened mil spec BCG(Bolt Carrier Group) from Daniel Defense. And I just had a Glock armorer install an extended slide and mag release on the Glock .40. May film an updated video in more detail of the AR but would like to wait until I get the ideal optics upgrade added on.
2012skunkape 1 year ago
very nice ar15 and the other two lol
ARMEDLOCATION 1 year ago