Dude...I equipped my truck with a old air intake, gibson exhaust and i didnt feel anydifference in power....I wanted to do some research and i saw some posts on slack in the throttle cable....saw your video, did it, and my truck hasnt felt better, huge power increase, throttle response, and it actually opened the secondaries probably the first time in years...cleaned it out, stopped slight knocking, and running better than ever...thanks
same here no spring,but i do have rubber grommet,and some slack,took it out,now my ranger revs to about 5100rpms and i'm doin 90 in fourth when it shifts to 5th.thanks for the tip FNC!!
all ranger 93+ should have springs! if not then either it was removed due to sticking of throttle orrrr someone jammed the gas too hard and broke the spring and it fell off
@huffa12 if you have a ranger, then it should have a spring there, if not you should check to make sure. Its sounds like it supposed to have a spring or something
and have you had any problems with it since youve done it? or has it all been running perfect? because i think that my throttle cable might be stretched out as well, and i dont have the cash to buy a new one, but i do have ties.
man i did this today right after i got out of school i fight 2 wide zip ties around mine and man i wasnt expecting to feel that much of a difference! and i went one step further and lubed the gas pedal with wd-40 and now the pedal moved smoothly it did befor but it was slightly harder to push i didnt stick but man thanks for the video im soooooo happy!!
Since mine is a 91 with the the good old fashioned throttle cable I am sure I could do this, but I won't get to try it until I get it back on the road again.
goddammit.. there's a carpet baffle piece in the way & I don't feel like taking all the plastic screws out right now.. maybe in few hours when there's daylight out :D
Im In Niger I just Got A Brand New Honda Civic My Wife Said When Are You Selling it And I said Shut up Bitch Im Driving it Till It Drops I will also use Soya Suace in it
theres a none getto way of doing it. tighten the throttle cable lmao
GEO3535 3 months ago
Dude...I equipped my truck with a old air intake, gibson exhaust and i didnt feel anydifference in power....I wanted to do some research and i saw some posts on slack in the throttle cable....saw your video, did it, and my truck hasnt felt better, huge power increase, throttle response, and it actually opened the secondaries probably the first time in years...cleaned it out, stopped slight knocking, and running better than ever...thanks
matty926lamp 4 months ago
same here no spring,but i do have rubber grommet,and some slack,took it out,now my ranger revs to about 5100rpms and i'm doin 90 in fourth when it shifts to 5th.thanks for the tip FNC!!
chevelle888 7 months ago
all ranger 93+ should have springs! if not then either it was removed due to sticking of throttle orrrr someone jammed the gas too hard and broke the spring and it fell off
rangerrunner11 1 year ago
my truck don't have that spring so i had about 2 inches i had to put zip ties on
huffa12 1 year ago
@huffa12 if you have a ranger, then it should have a spring there, if not you should check to make sure. Its sounds like it supposed to have a spring or something
FordNissanChevy 1 year ago
@FordNissanChevy i put the zip ties on myself about 3 weeks ago and there was no spring. i have a 96 ranger though so that might be why
huffa12 1 year ago
@huffa12 doesn't have*
rlmadrid1 10 months ago
and have you had any problems with it since youve done it? or has it all been running perfect? because i think that my throttle cable might be stretched out as well, and i dont have the cash to buy a new one, but i do have ties.
TheJoshy1992 1 year ago
@TheJoshy1992 no problems at all
FordNissanChevy 1 year ago
man i did this today right after i got out of school i fight 2 wide zip ties around mine and man i wasnt expecting to feel that much of a difference! and i went one step further and lubed the gas pedal with wd-40 and now the pedal moved smoothly it did befor but it was slightly harder to push i didnt stick but man thanks for the video im soooooo happy!!
joeldude76 1 year ago
what year is the ranger?
joeldude76 1 year ago
@joeldude76 2005
FordNissanChevy 1 year ago
@joeldude76 I figured and 04 but he said 05 lol
Learnthethingsido 1 year ago
I will have to do this to my truck.
79Datson 1 year ago
Since mine is a 91 with the the good old fashioned throttle cable I am sure I could do this, but I won't get to try it until I get it back on the road again.
Roushfan5 1 year ago
wait... why is there a spring there in the first place? wouldn't you have sharper response without a spring??
JakeDaSnakeFilms 1 year ago
@JakeDaSnakeFilms im guessing thats there so if it is fully open you dont break any linkage or the cable or something
FordNissanChevy 1 year ago
@FordNissanChevy Its so the throttle dont stick opened!
Learnthethingsido 1 year ago
ya don't want teh throttle to stick tho or else it'll go blap blap blap after you turn teh key offz
FatGuyWithAKatana 1 year ago
goddammit.. there's a carpet baffle piece in the way & I don't feel like taking all the plastic screws out right now.. maybe in few hours when there's daylight out :D
JakeDaSnakeFilms 1 year ago
This has been flagged as spam show
Im In Niger I just Got A Brand New Honda Civic My Wife Said When Are You Selling it And I said Shut up Bitch Im Driving it Till It Drops I will also use Soya Suace in it
CrazyBritishBitch 1 year ago
too bad i got teh shitty electric pedal
naterade21 1 year ago
@naterade21 What car is that?
chicago85bearz 1 year ago
@chicago85bearz 09 malibu
naterade21 1 year ago
Excited to try!
afdhalatifftan92 1 year ago
im gonna do this to my malibu! than go race some ricers :)
redneckmikey69 1 year ago
Does this work on teh toyota's?
Nickgarage 1 year ago
@Nickgarage it might on older ones
FordNissanChevy 1 year ago
@FordNissanChevy imagine if you did this to a new Toyota then added stickers. Were talking 23,547 BHP?
Nickgarage 1 year ago
@Nickgarage teh accelerator would get stuck and it would hit speeds of over 9000 MPH
FordNissanChevy 1 year ago
@FordNissanChevy What would happen if you did the Air box mod then ran Timmah fuel?
Nickgarage 1 year ago
@Nickgarage blackhole made of shit
FordNissanChevy 1 year ago
@FordNissanChevy CORRECTION...with the "NoThrottle Stuck" option this will not happen! unless you zip tie your throttle open!
jtreign9097 1 year ago
@FordNissanChevy Assuming the frame held up once the car hit 60 MPH. Which is a lot to assume. Most would just snap in half.
Roushfan5 1 year ago
@FordNissanChevy It's OVER 9000!!!!
KennayLee 1 year ago
@Nickgarage Yes, it does adjust the two screws by the throttle body which hold the throttle linkage in place.
hypervish89 1 year ago
nice i might try it someday
jovanvictoria 1 year ago