Hey Kamui~ I really admire your work, you have some amazing cosplays and I love that you share your knowledge through tutorials<3 I was wondering how you hide your wires for this circuit? I can imagine a solution for clothing, but what about props, like your staff for Druid Tier 8, how did you hide the wires there?
Finde deine Tutorials sind soo toll, danke! Hab aber noch ne Frage: Welche Lichtstärke haben deine LED's (Einheit is "mcd")? Oder kannst mir den Link geben wo du sie bestellst? Bräuchte irgendwelche Vergleichswerte.
@Mogrymillian Thank you! btw, it worked for the other videos. You make nice shapes (the fact that curves twis away from a single plane also..). i had a great laugh on this vid where the cosplay guy is feeling the breasts of the nibelungen/loengrien-like girl in this dramatic scene :D! also BTW, if you want to lake your LEDs blink google "multivibrator" and you'll see a very simple circuit.
It mostly smell only when I mxied both components. So I mix it mostly somewhere with a good air circulation, let it dry there and work with it when it's complete done.
Ich liebe deine Tutorials, Das was du da als negativform für deine Kugeln hast ist doch Silikon oder? Gibt es auch Alternativen dazu weil ich beispielsweise etwas aus Silikon gießen möchte und dazu ja keine SIlikonabformmasse nehmen kann schätze ich mal.
Hm.... ich glaaaaaaaaube, du kannst Silikon zum Abformen von Silikon verwenden. Dafür musst du aber höchstwahrscheinlich Silikontrennmittel verwenden, damit sich beide Silikone nicht verbinden. Ich denke, das würde funktionieren, aber google einfach noch ein wenig. Ansonsten ja, es gibt auch andere Mittel, etwas abzuformen, aber die habe ich leider noch nicht verwendet. Auch hier einfach mal googleln. Das Internet ist allwissend! :)
Vielen Dank für das tolle Tutorial! :) Ich bin immer noch hin und weg von deinem Druiden Tier 9 Bild des letzten Eintrags! (wie konnte dein Freund nur von anderen Leuten Fotos machen & dich dafür verschmähen auf der Dragon-Con?! ^^) Du bist eine solche Künstlerin, mach weiter so! :)
Kleiner Tip wenn dir das mit dem Harz-Härter Mischverhältnis irgendwann auf den Keks geht. Es gibt auch Harze im Mischverhältnis 1:1. Das ist für mich immer einfacher.
Thank you so much for finally doing something like this! The circuits are something I needed to learn as soon as possible! Thanks again so much Svetlana! :D
Hey Kamui~ I really admire your work, you have some amazing cosplays and I love that you share your knowledge through tutorials<3 I was wondering how you hide your wires for this circuit? I can imagine a solution for clothing, but what about props, like your staff for Druid Tier 8, how did you hide the wires there?
YumeYoroshii 1 week ago
das ist ja mal hammer *_*
und extrem klasse gemacht :D
Nyu0Lucy 4 weeks ago
Very nicely done. Thanks!
Grimgorus 1 month ago
Finde deine Tutorials sind soo toll, danke! Hab aber noch ne Frage: Welche Lichtstärke haben deine LED's (Einheit is "mcd")? Oder kannst mir den Link geben wo du sie bestellst? Bräuchte irgendwelche Vergleichswerte.
MultiLowbob 3 months ago
@MultiLowbob
Schau mal bei dem Ebayshop mw-Shop-online vorbei. Die meistern meiner LEDs haben um die 12000 mcd.
Mogrymillian 2 months ago
@Mogrymillian Supper, danke!
MultiLowbob 2 months ago
Thank you for share! Are perfect gems!
AngelArwenn 4 months ago
PS Sorry but the subtitles aren't updating while the vid rolls, what is the spray that clears your sanded resin? Thanks!
hallobaaaby 4 months ago in playlist Autres vidéos de Mogrymillian
@hallobaaaby
Hm... weird, my subtitles work.
It's an acrylic finish.
Mogrymillian 4 months ago
@Mogrymillian Thank you! btw, it worked for the other videos. You make nice shapes (the fact that curves twis away from a single plane also..). i had a great laugh on this vid where the cosplay guy is feeling the breasts of the nibelungen/loengrien-like girl in this dramatic scene :D! also BTW, if you want to lake your LEDs blink google "multivibrator" and you'll see a very simple circuit.
hallobaaaby 4 months ago
@Mogrymillian PS egg-nowre typos lol
hallobaaaby 4 months ago
How can you work with resin in the room, doesn't it smell like hell??
hallobaaaby 4 months ago in playlist Autres vidéos de Mogrymillian
@hallobaaaby
It mostly smell only when I mxied both components. So I mix it mostly somewhere with a good air circulation, let it dry there and work with it when it's complete done.
Mogrymillian 2 months ago
thank you!! always read your blog ^^ hope to see you at mcm expo!
Annchirisu 5 months ago
You are so amazing and inspiring, Kamui! :) Keep up the great work!
PdinProductions 5 months ago 3
@PdinProductions
Thanks a lot! :)
Mogrymillian 2 months ago
Ich liebe deine Tutorials, Das was du da als negativform für deine Kugeln hast ist doch Silikon oder? Gibt es auch Alternativen dazu weil ich beispielsweise etwas aus Silikon gießen möchte und dazu ja keine SIlikonabformmasse nehmen kann schätze ich mal.
Es soollte eben auch mehrmals verwendbar sein
razendar 5 months ago
@razendar
Hm.... ich glaaaaaaaaube, du kannst Silikon zum Abformen von Silikon verwenden. Dafür musst du aber höchstwahrscheinlich Silikontrennmittel verwenden, damit sich beide Silikone nicht verbinden. Ich denke, das würde funktionieren, aber google einfach noch ein wenig. Ansonsten ja, es gibt auch andere Mittel, etwas abzuformen, aber die habe ich leider noch nicht verwendet. Auch hier einfach mal googleln. Das Internet ist allwissend! :)
Mogrymillian 5 months ago
Lovelly, as always! ^_^
snitramela 5 months ago
Wonderful! Thanks so much! This really helps a lot :D
Raidneyami6 5 months ago
Awesome tutorial, thank you so much! <3
SayaShinigami 5 months ago
danke für das tutorial
ich hätte gerne mehr davon
du machst das echt gut
und vor allem auf deutsch ^^
Ain3ko 5 months ago
Vielen Dank für das tolle Tutorial! :) Ich bin immer noch hin und weg von deinem Druiden Tier 9 Bild des letzten Eintrags! (wie konnte dein Freund nur von anderen Leuten Fotos machen & dich dafür verschmähen auf der Dragon-Con?! ^^) Du bist eine solche Künstlerin, mach weiter so! :)
FraeuleinPink 5 months ago
Can i just recommend a thing: Test the LED before
mokmo23 5 months ago
@mokmo23
He he, no worries. I do this. I just wanted to show how it works. :)
Mogrymillian 5 months ago
@Mogrymillian you only paint the backside?
petrino 5 months ago
@petrino
Yepp!
Mogrymillian 2 months ago
bäh, Dr. Pepper XD
Schönes Video :)
Kleiner Tip wenn dir das mit dem Harz-Härter Mischverhältnis irgendwann auf den Keks geht. Es gibt auch Harze im Mischverhältnis 1:1. Das ist für mich immer einfacher.
bjoernzanza 5 months ago
Comment removed
bjoernzanza 5 months ago
@bjoernzanza
Ach naja, bei 100 gramm gebe ich 100 Tropfen dazu. Daher muss ich nicht wirklich rechnen, aber 1:1 ist natürlich noch einfacher. Danke! :)
Mogrymillian 2 months ago
wow echt nice!
magistermagi1989 5 months ago
Thank you so much for finally doing something like this! The circuits are something I needed to learn as soon as possible! Thanks again so much Svetlana! :D
00Lyeric 5 months ago
@00Lyeric
You're welcome! I'm glad I was able to teach so something new! :)
Mogrymillian 2 months ago