How to Remove a M4A1 Flash Hider

[chri123r]

It's actually pretty impressive, that you can make a 5 minutes long video, only explaining how to remove the flash-hider..! It would take me 15 seconds! :D

[Psycho983]

sweet vid. actually helped.

[mynameismrlamp]

GAAAH the allen wrench part is stripped any help please?

[BiizMuth]

you have to much light by the way its hard to see stuff

[Tac5Airsoft]

@BiizMuth sorry bro



[BiizMuth]

@Tac5Airsoft ho no its cool its just really hard to see it help me alot thumbs up :D

[NeonVars]

I'm sorry accidental early post. As I was asking, is counter clockwise righty loosy and clockwise is right tighty. So you said most airsoft guns have counter clockwise threads? Please respond.

[Tac5Airsoft]

@NeonVars its the opposite of everything else, righty loosy lefty tighty.

[NeonVars]

Okay so counter clockwise is right loosy

[airsoftsmackthewall]

YAY, NOW ITS ILLEGAL!!! XD

and looks terrible

[SoCalAirs0ft]

@airsoftsmackthewall It's not illegal. Only if you bring it outside into public, it's illegal. If you bring it into an airsoft field, some allow black flash hiders.

[Airsofter012895]

hey i know this might make me look stupid but i tried taking it off and stripped it then i tried to super glue the allen key and then try to unscrew it then and it still wont come out any suggestions?

[TheNen00]

For people that wants to take the hex screw out but stripped the screw, I used a star key instead and it came right out!

[TheAdgjl666]

What about a Matrix/Asia gun SR-15

[FarceMartyr1229]

I have a G&G CM16 light and it is IMPOSSIBLE to get mine off even after removing the pin. I'm not sure what to do

[Clavier84]

I have a Stag Arms M4 with removable front barrel and my flash hider has two small pieces: one is an small Allen screw and the other one is like a small pin which I don't know how to remove. It's a little bit scary to take it out because I don't know if it will damage my gun or my barrel so if you have any advise on how to remove this small pin out pls let me know! Thnx!!

[GregoryJM145]

when he says orange tip 4 some reason i thought of a ompa lumpa( from charlie and the chocolate factory) penis

[congwen12]

i have 1.5 mm allen wrench, and my flash hider has that allen screw. but its glued on the outside, and my allen wrench is kinda wear out trying to screw out the screw. is there plan B?

[JacobTwo4]

does it work with G&G CM16?

[Tac5Airsoft]

@JacobTwo4 yes it will work for any high end m4/ m16 series

[DkPGaming]

@JacobTwo4 watch out 4 g&g guns they use super glue its harder to take off

[slimjimdaman1]

Does this work with g&g gr16 m4

[Dogataen]

What song is that at the beginning?

[weRwednsdays]

@Dogataen bullls on parade by ratm

[WhyTheHellNot11]

Are the threads negative?

[Iancwilliamson]

Ur fucking gay...... Hey, I want my toy gun to look real so I'm just gonna take the orange tip off...... U don't see orange on any of my guns

[Tac5Airsoft]

@Iancwilliamson If you dont give a shit then why are you looking up how to take it off you dumbass? go fuck yourself.

[FarceMartyr1229]

@Tac5Airsoft Ok Billy Hilly. Go take some of your guns and shoot at your friends with them and try not to get arrested for attempted murder.

[BoombaCakes]

@Iancwilliamson i just wanted to add a suppressor geesus

[Tac5Airsoft]

@BoombaCakes ?

[xXfreakbotXx]

@BoombaCakes Aren't you a bit of a hypocrite, you told him he's gay for removing it, when you were going to do the same and in some states it's legal to remove it and add a non-colored flash hider, its just illegal to sell without one.

[BoombaCakes]

@xXfreakbotXx um someone called this vid gay cuz he wanted to make his gun look real so i told him i just wanted to add a barrel extension on my gun not to make it real. get off my ass

[xXfreakbotXx]

@BoombaCakes Oh, doesn't that make it look real though and no worries I'm doing the same..

[jokerjayv8]

@Iancwilliamson stop being a gay pompous wanker at least hes is not a doosh who says that crap on anyone elses video comments and who care if there is orange on his guns at least its not pink you twat, you probably have pink on your guns you sissy!!!

[sgteltorcho]

@Corey9861 No it's not. If it's on your own property or an airsoft ground, you don't have to have an orange tip.

[GoTreyarch4]

will the blow dryer work for a two-piece orange flash hider, like on the cybergun thompson?

[Tac5Airsoft]

@GoTreyarch4 Im not sure but there's no way it will damage it so go for it

[AtomicAirsoft1]

My M4 has that same screw but I am afraid that if you hammer it through the flash hider that it will puncture the inner barrel and cause damage. Is this true or will there be no damage if you hammer this through.

[Bindlemind]

omg t hank you so much for telling what size mm the hex key is

[deathfromasian]

my echo 1 m16 has the two screw thing too and it has been ,me for a while now i cant take it off, i was able to take one off but the one that u were talking about, where u had to hammer it in wont come out. after watching ur vid i thought about hammering it in but i saw no hole in the barrel and dont want to risk hammering it in and causing damage, wat would u do

[Tac5Airsoft]

@deathfromasian if you look directly into the barrel you probably aren't going to see the hole for the screw. I didn't for mine. i hammered lightly on the roll pin and it went through and into the barrel, then i just tipped the gun to roll it out.

[deathfromasian]

@Tac5Airsoft ty but i finally risked it and got it, my tight bore was longer than then original one so thats y i couldnt c it and lucky i moved it a little before hammering it

[xMiggy]

it's righty-loosey because the threads are counter-clockwise.

[Tac5Airsoft]

@Gam3rBoY58 also if that doesnt work it might be the one where you take a small pin and hammer it out

[Tac5Airsoft]

@Gam3rBoY58 You have to make sure u are using a METRIC alan key. Go to home depot or something. 1.5 MM SIZE!!! Very important or u might damage the threads.

[DeezyBro9]

thanks i took it off this morning with a blowdryer

[Tac5Airsoft]

@DeezyBro9 no problem

[105thGRProductions]

wat type of nail do u use to hammer it out cuz i used a small enough siz for it and hammered it down and it still wont cum out

[DeezyBro9]

how do i get the small pin out? can i just blow dry the glue and twist it off with the flash hider?

[Tac5Airsoft]

@DeezyBro9 you have to punch it through... try a paperclip or something small and hammer it through