What is the name of the program? This video is animation, or real simulation of bipolar magnetic forces? I serch for 3D mechanical simulator software with real permanent magnet propertyes.
@karvak1492 Lightwave 3D this is a test motion simulation to work out how the parts move. if I was to build one it would be the other design Permanent Magnet Motor simulation I created there are issues with shielding the ends that is not in this simulation. cheers
I really like the concept, and would like to attempt a working model of something similar with all monopolar vs alternate poles.. will hopefully post a vid soon succeed, or fail
awesome man. I applaud you putting your best effort into this. But how are you going to control the speed of that magnet wheel? If you don't, it would just spin out of control
para is right, i think you need in the simulation on the wheels the opposite magents. i would understand how south would pull up the north and the other piston type part would usse north to repel the north on the wheel. i liek this though. how fast would this model acctually go in rpm's, and how much torque?. i was attempting to build an electric motor but it failed miserably and now idk what to do with the industrial stregth 250 lb force magnets. this model would hold them.....
if you notice the magnets on the drum are long and the magnet on the pistons are North and South this is why drum magnets are so long they create a range of force. there are 4 sets of pistons 2 on each drum. the second drum is offset from the first to overlap the pulling force the latest version is far more adjustable I will be posting it soon. this was to complicated to build right now due to the crank calculations.
does nobody cop the timing is off on this video... like its showing opposite colours meeting surely these mean North and South and if so wouldnt they just Pause and stick to each other surely the rod moving in should repel the magnet on the spinning drum??????
Not shown is the shielding on the end of the magnet, and it does not stick due to the speed of the drum. with the 4 sets of pistons one set is at maximum drag the other 3 sets are in various stages of pull this was just a simulation the new design is far more adjustable, but due to my work with Super Capacitors, I haven't had time to build it, but I will post the animation soon. Our website is where I will post efforts and results
Cool design, I just wonder how will the main drums start rotating, and after that how will it acelerate... or its not supposed too !?!? Its supposed to just maintain steady rotation !?!?
kick ass concept, modeling and animation... !!!!! I'm playing with a concept of magnetic motor too, but still in the thinking phase... soon as I have something i'll post here too !!
thanks, always happy to hear from someone working on there own designs. one peace of advice do not blindly except others results no matter who it is, every experiment we have done is to prove it to ourselves. Good luck :)
it would reach a point that it could not provide enough power to keep accelerating and reach it's top speed and stay there until the load being applied that is doing the work is to great and that slows down the mechanism. this is only a theory I have not built this design yet.
Correction: i think you meant where is the energy coming from: a degradation in the magnets or from else where and the answer is that it is not an energy producing device, this idea, while seaming good, if built, would fail because of that age old problem faced by all free energy projects: the second law of thermo dynamics. In other words, so long as the laws of physics and the physical constants don't change then the conservation laws must be true.
Dude don't spout second law of thermal dynamics you are clueless, do the experiments do not blindly except what you do not fully understand, 5 years of experimenting and proofing theories is the only answer, I know I will get flack for this BUT throw that Damn Book away !
To put it the other way around: if "overunity" machines were possible, then most of what we believe to be true about physics, mathematics, or both would have to be false.
hey cool design. really clean work man. for a yr 12 physics assignment i get to look over a machine of choice. do you have any explaination in physics terms on where the zero point energy is derived from in the system? hope to hear from you soon
Thanks, some theorize that the Bloch wall of a permanent magnet is a zero piont energy amplifier others believe, that the magnetic domain alignment in a magnet creates the permanent magnet, and this is highly debated within the research community.
A good example of zero point energy machine is a pulse motor with Tesla's impulse technology applied to it, a pulsed coil can produce zero point energy, as the magnetic field collapses the zero point energy rushes in to fill the void of the collapsing field, creating a anode between the two wires of the coil, the energy is tapped using a bridge rectifier and the diode bridge channels the captured energy so it can be stored in a capacitor or charge a battery.
Magnets have as much potential energy as gravity. So, when you can overcome gravity with a device that doesn't use fuel then there will be something worth discussing. Until that happens ... it's just mental masturbation.
Dont waste your $10,000 to attempt to patent it. The best thing a person can do after making such a motor device is to contact a television station and present it operating on a syndicated global news media basis Also you could explain just how it works on syndicated news. Now all fame will be directed your way and who cares what crawls out of the woodwork to challenge your free showing.
Sorry but this is my design! I don't know you, or have I seen any of your work. Sorry but I am in the USA. If you have a US patent# let me know otherwise go away you are not the only one to claim what I have created! Even if you have some kind of claim and I am not saying you do. this is just a 3d rendering of my concept. everyone is looking for real solutions. if this Device works where is the proof? this could change the world, if this device could generate significant torque.
Yeah, I'd like to know what your patent number is too because you are full of it. They don't grant patents to perpetual motion devices. Why? Because they don't exist.
guys don't fight here, we talk about science, do you want to fight for something not yet working or to understand what's here. Let me to understand, and for this give to me some formulas, and some calculated results. There is mechanical system with magnetic forces. Don't you think that the energy from the main wheel going through mechanic system to magnet moving pistons is much more than energy from main wheel going as electricity to some coils instead of magnetic pistons and also is not enough?
who ever did this and realy want to help the cause . I am building a unit myself. Not like this one but of another design. I would like your help putting my design in this 3 d fasion. I have made many alpha units and a few beta units. Of course I am your tipical broke inventor. Though I have sources that will pay for the unit itself. If you are interested. Thanks. Contact me if you would.
What is the name of the program? This video is animation, or real simulation of bipolar magnetic forces? I serch for 3D mechanical simulator software with real permanent magnet propertyes.
karvak1492 2 weeks ago
@karvak1492 Lightwave 3D this is a test motion simulation to work out how the parts move. if I was to build one it would be the other design Permanent Magnet Motor simulation I created there are issues with shielding the ends that is not in this simulation. cheers
zeropointfuel 2 weeks ago
its just idea....any one ant make it :P:P:P:P:P
palmisto2 6 months ago
Finally we saw a working model of magnat motor well done!!
vartatoosh 8 months ago
that stand a chance of working... the ones with stationary magnets never do
GoodByeKyle 9 months ago
Yup , kick ass
wargarkaz 1 year ago
I really like the concept, and would like to attempt a working model of something similar with all monopolar vs alternate poles.. will hopefully post a vid soon succeed, or fail
GIppie
cgippie2008 1 year ago
Anybody built it yet? Any feedback or vids on actual tests? Would be really interesting to see it in live action. Keep up the good work!
amgprs 1 year ago
I would love to find a program that applies actual known physics so that we can test models on computers before actually building one.
joelito101 1 year ago
@joelito101 Autodesk inventor is pretty kickass. It has the price tag to prove it =P
MrQuijibo 1 year ago
graet idea. but think they are a little out of faze. i dont see how it wouldent work.
chrismofer 1 year ago
whit what software you did that?
Andrukas09 2 years ago
awesome man. I applaud you putting your best effort into this. But how are you going to control the speed of that magnet wheel? If you don't, it would just spin out of control
UberWagen 2 years ago
dynamo?
bmfoshizzle 2 years ago
hey in this way of making, will it stop easliy because it is attract to the turning?
robotpredator8 2 years ago
para is right, i think you need in the simulation on the wheels the opposite magents. i would understand how south would pull up the north and the other piston type part would usse north to repel the north on the wheel. i liek this though. how fast would this model acctually go in rpm's, and how much torque?. i was attempting to build an electric motor but it failed miserably and now idk what to do with the industrial stregth 250 lb force magnets. this model would hold them.....
poorlesshobo 2 years ago
if you notice the magnets on the drum are long and the magnet on the pistons are North and South this is why drum magnets are so long they create a range of force. there are 4 sets of pistons 2 on each drum. the second drum is offset from the first to overlap the pulling force the latest version is far more adjustable I will be posting it soon. this was to complicated to build right now due to the crank calculations.
zeropointfuel 2 years ago
does nobody cop the timing is off on this video... like its showing opposite colours meeting surely these mean North and South and if so wouldnt they just Pause and stick to each other surely the rod moving in should repel the magnet on the spinning drum??????
paramedpiper 2 years ago
Not shown is the shielding on the end of the magnet, and it does not stick due to the speed of the drum. with the 4 sets of pistons one set is at maximum drag the other 3 sets are in various stages of pull this was just a simulation the new design is far more adjustable, but due to my work with Super Capacitors, I haven't had time to build it, but I will post the animation soon. Our website is where I will post efforts and results
zeropointfuel 2 years ago
Cool design, I just wonder how will the main drums start rotating, and after that how will it acelerate... or its not supposed too !?!? Its supposed to just maintain steady rotation !?!?
ledametto 2 years ago
If it would work it would accelerate on it's own till the power lost to friction matches the power generated by the motor.
bboysil 2 years ago
kick ass concept, modeling and animation... !!!!! I'm playing with a concept of magnetic motor too, but still in the thinking phase... soon as I have something i'll post here too !!
Congrats !!
ledametto 2 years ago
thanks, always happy to hear from someone working on there own designs. one peace of advice do not blindly except others results no matter who it is, every experiment we have done is to prove it to ourselves. Good luck :)
zeropointfuel 2 years ago
it would reach a point that it could not provide enough power to keep accelerating and reach it's top speed and stay there until the load being applied that is doing the work is to great and that slows down the mechanism. this is only a theory I have not built this design yet.
zeropointfuel 2 years ago
@bboysil lube and bearings
chrismofer 1 year ago
Cool design, I
ledametto 2 years ago
what type of program do you use for these designs. please let me know
bec9112001 2 years ago
Hey,
Great work...
and a Great Hope for the Future...
I share your thoughts,and i wanted to ask u ...
-Do permanend magnets(rare magnets only??) wear off?
-Is it really zero point energy or a convertion from "magneticity"-to electricity in a system that lasts for some years?
-And if the magnet wears out,
how can we recharge it?
THNX
MAKISG276 3 years ago
Correction: i think you meant where is the energy coming from: a degradation in the magnets or from else where and the answer is that it is not an energy producing device, this idea, while seaming good, if built, would fail because of that age old problem faced by all free energy projects: the second law of thermo dynamics. In other words, so long as the laws of physics and the physical constants don't change then the conservation laws must be true.
zantrua 2 years ago
Dude don't spout second law of thermal dynamics you are clueless, do the experiments do not blindly except what you do not fully understand, 5 years of experimenting and proofing theories is the only answer, I know I will get flack for this BUT throw that Damn Book away !
zeropointfuel 2 years ago
i agree. the second law of thermodynamics is stupid and false. and it wouldnt matter if it were true because magnet motors dont break this "law".
yoyodude7407 2 years ago
To put it the other way around: if "overunity" machines were possible, then most of what we believe to be true about physics, mathematics, or both would have to be false.
zantrua 2 years ago
Well maybe it's False, I know for a fact that soon the hole world will know Zero Point Energy is no myth.
zeropointfuel 2 years ago
hey cool design. really clean work man. for a yr 12 physics assignment i get to look over a machine of choice. do you have any explaination in physics terms on where the zero point energy is derived from in the system? hope to hear from you soon
alpha6echo 3 years ago
Thanks, some theorize that the Bloch wall of a permanent magnet is a zero piont energy amplifier others believe, that the magnetic domain alignment in a magnet creates the permanent magnet, and this is highly debated within the research community.
zeropointfuel 3 years ago
A good example of zero point energy machine is a pulse motor with Tesla's impulse technology applied to it, a pulsed coil can produce zero point energy, as the magnetic field collapses the zero point energy rushes in to fill the void of the collapsing field, creating a anode between the two wires of the coil, the energy is tapped using a bridge rectifier and the diode bridge channels the captured energy so it can be stored in a capacitor or charge a battery.
zeropointfuel 3 years ago
Oh and one more thing.... magnetman2000... never did see you post that patent number. Go crawl back under your rock.... Moron!
dshaun67 3 years ago
Magnets have as much potential energy as gravity. So, when you can overcome gravity with a device that doesn't use fuel then there will be something worth discussing. Until that happens ... it's just mental masturbation.
dshaun67 3 years ago
Hi All,
Dont waste your $10,000 to attempt to patent it. The best thing a person can do after making such a motor device is to contact a television station and present it operating on a syndicated global news media basis Also you could explain just how it works on syndicated news. Now all fame will be directed your way and who cares what crawls out of the woodwork to challenge your free showing.
64298 3 years ago
Iown this patent .and I didit gave you permisson to work on my desigms.
magnetman2000 3 years ago
Sorry but this is my design! I don't know you, or have I seen any of your work. Sorry but I am in the USA. If you have a US patent# let me know otherwise go away you are not the only one to claim what I have created! Even if you have some kind of claim and I am not saying you do. this is just a 3d rendering of my concept. everyone is looking for real solutions. if this Device works where is the proof? this could change the world, if this device could generate significant torque.
zeropointfuel 3 years ago
Yeah, I'd like to know what your patent number is too because you are full of it. They don't grant patents to perpetual motion devices. Why? Because they don't exist.
dshaun67 3 years ago
guys don't fight here, we talk about science, do you want to fight for something not yet working or to understand what's here. Let me to understand, and for this give to me some formulas, and some calculated results. There is mechanical system with magnetic forces. Don't you think that the energy from the main wheel going through mechanic system to magnet moving pistons is much more than energy from main wheel going as electricity to some coils instead of magnetic pistons and also is not enough?
kondordv 3 years ago
who ever did this and realy want to help the cause . I am building a unit myself. Not like this one but of another design. I would like your help putting my design in this 3 d fasion. I have made many alpha units and a few beta units. Of course I am your tipical broke inventor. Though I have sources that will pay for the unit itself. If you are interested. Thanks. Contact me if you would.
remsource1 3 years ago
I want to help
LandlordsBelleview 3 years ago
Nice video,
reminds me of the Korean magnet motor...
Well put the 2 magnet drums as far away from each other as you can, cause the fields will
interfere with each other.
Otherwise very nice animation.
Keep up the good work.
Regards, Stefan.
overunitydotcom 3 years ago 4
i like the look of this, you should build it and see what happens
jake5680 3 years ago 5
MAKE IT!
shanebieda 3 years ago 5
Build it and use it :D
Subspace4d 3 years ago 4
Very nice idea ! Bravo !
But you need to reinject the rotation movement produced by the magnets thanks to gears to make the main wheel turn.
By the way, can you tell me what software you used to build and make all this move with law of physics ?
Thanks !
BlueManCa.
bluemanca 3 years ago 10
@bluemanca could flywheel help in it?
DjGisME 1 year ago
Very good idea
madcribz 3 years ago 8
I Agree it has potential if the drum rotation can overcome the drag as it pulls away :)
POTCBandTV 3 years ago 5