Them tail lights are bad ass. I have a 2010 se so I already have led I was thinking of tinting my tails? My glove box light don't work and I don't even know how to replace it, I want to do it red led
the same bulbs you use for the map lights you can use for the courtesy lights and the rear reading lights as wells right? im sorry im really new at this stuff.
For the light that is in the middle of the map light I try replacing it with a LED's and when I put the LED bulb in it didn't work. So I got the old light bulb and that is now not working either. I noticed that the bulb doesn't really sit right. What should I do?
@navidb7 My DRLs/HighBeams are Super White H11 bulbs. DRLs put out low wattage so no matter what you put, its going to look yellow and dim. Putting a 55w as DRL will do nothing because it will not be using full power except when using highbeam and using that will only blind on coming traffic.
@ieon Tail lights are from eBay. Read video description. I provided links to site to purchase LED or click on link for Master LED List for more sites that sells LEDs.
@Jeison2784 Use a mirror and pliers to remove bulb or go to the Master LED thread list for DIY or my CarDomain page. All links are in video description.
this is why honda's will always kick toyotas ass in performance. accord and civic have every aftermarket part you could ever want.. and camry well we got LED bulbs
WTF gooseneck trunk hinges? Shameful Toyota. And you're lucky the car doesn't sense bulb failures like my VW or you'd have to get resistors on ALL those exterior lights...and uh...short of the map and dome lights, all my interior lights are LED from the factory.
@changmin0123 HVAC is fine also. Instead of greenish look, it will be blue. If you want to change the color to something else, you'll need to desolder the old LED and resolder new ones. Information is found on ToyotaNation.
Might sound like a dumn question but i recently got a 2011 camry se w/ sunroof, and i wanted to know if all of the 194 bulbs you got are the same kind.
@xXGmaineXx The Master LED List link in video description has EVERY LED bulb size for Gen 6 (2007-2009) to Gen 6.5 (2010-2011). Since you have sunroof, like me, what I posted in video description is the same you'll need in yours (all lights overhead will be LED size 194). For those who DO NOT have a sunroof, the map light in the middle of the headliner would be LED size 3022.
@changmin0123 Speedometer is stock. I did not change it. On ToyotaNation, some members have changed the color of the need and changed it from white to blue. They also posted DIY and other information. To change the color of the white background on speedometer, it requires desoldering stock LEDs and soldering new blue LEDs.
@lalibilalibiwith I don't know what car you have but Camry's low beam and fogs are H11. Secondly, you CAN NOT put LEDs in low beams because LEDs are not bright enough to light up the road. Not only that, you'll fail inspection and its dangerous to not only you, your passengers, pedestrians and other drivers because its not bright enough to be headlight. LED in high beams/DRLs is also a NO-NO because you lose high beam function and you also won't pass inspection.
@toyota4life94 No because it was purchased awhile ago. Do a search on ebay for "trd license plate" its not that hard. If its not there in the search on ebay, than its no longer available.
how did u open up the reading lights in the back. i tried opening them up but its really stuck..do u have any idea on how i should open it... and also how did u change the color of the signal on the inside and the parking lights inside. please let me know asap
@nbhatt786 Read the video description. Link to tutorials and DIY is in there. All your answers are answered in the video description. Turn signals are LED that are switchbacks.
@TheKevin34162 No. 194 for dome light is only if you have sunroof on a 2007 and up. If you have no sunroof, the LED bulb is 3022. Read video description for link to ToyotaNation Master LED list. It has all the LED bulb sizes you need to find out.
@taxi2564 You do not have to remove the front head lights. Pull back the wheel well cover where the tires are shove your hands inside. Instructions are the same as 2007-2009.
@kareem111111 Steering wheel cover was purchased off of Amazon. You can get it from any auto shop. Its not one of those slip on type. The leather goes over the steering wheel but uses nylon string to keep it in place.
Toyota Refuses to fix Toyota Camry SE 2011 power steering pump whinning. Vondalette White at Toyota Customer Experience at corporate told me to go ahead and post vidio's it won't hurt toyota sales. so look at them.
@TheKevin34162 LED bulbs are LED bulbs. They are not car specific. Search for what LED bulb sizes your car uses and look at the site. For instance, LED bulb size #74 will work on any car that uses that size. Same for #194, #921, #3021 etc.
yeah you do lose the brightness but all the lights on without the headlights is evil looking, and i have my factory pair just for trips and inspections so i can see and pass.
@danesimp08 I do not want LEDs in my DRL because you lose hi-beam functionality. They check for this during inspection too. Not having this will fail your inspection.
@Mzero3 Read previous comments and the copy in the video itself...they all tell you to go READ video description for link to Master LED thread. This has a list of LEDs you need and links to DIYs/Tutorials.
nice document of your work on your Camry, I just purchased on myself 2011 Camry se loaded with everything that you can think of, I may want to install the #194 led lights like yours this Spring or when the weather is a bit warmer, thanks for showing us how to do it cause I check with our local guys who asks $60 for installing 1 Dome light and 2 Reading lights at the back...
@rasooli2010 The car came with them. The rear reading lights is ONLY if you have sunroof. If you have no sunroof, you have dome light in the middle of the roof.
@dcemureviews Hi can please help... my car is a toyota venza... i dont know how to change the rear DOME LIGHT BULB..there is two small cirle like in the airplane? how to change the bulb? i mean remove? thanks...
@Richardte34 I don't own a Venza so I don't know. But if its like mine, you pull it down. Again, read video description. There's a link to ToyotaNation with links on tutorial on how to change rear lights.
@dcemureviews I saw now in your video we got same rear reading lights... just like in the airplane... please help me how to remove or change the bulb thanks...
@Richardte34 I'm going to answer this one more time...READ VIDEO DESCRIPTION. There's a link to ToyotaNation with links on tutorial on how to change rear lights.
@Richardte34 It's not hard to read. READ THE VIDEO DESCRIPTION. I have link to MASTER LED LIST on ToyotaNation (the link says toyotanation). When you click on the link, there's two links that says "Rear Reading Lights / Rear Reading Lights (Gen 6/6.5)".
@inNY90 I wouldnt say they are illegal but you might have a problem with inspection. And it would be annoying to drivers as well as yourself with the fast clicking sound.
@dcemureviews ok, because I changed every bulb in my 94 accord to LEDs. When I changed the rear turn signals they didn't hyper flash. But when I put in the front turn signals, they did. Have you ever heard of this happening?
the rear are 18 LED bulbs and the front are 3 watt high power LED
@inNY90 Interior LEDs don't monitor voltage of bulbs. Every manufacturer/model has different ways of how things work. What u experienced is normal. It seems the rear doesn't monitor low wattage. If u left the rear alone w/normal bulbs & for whatever reason, it blew out, u won't have hyperflash. But, if u kept the front w/normal bulbs & it blew out, it would hyper flash. Some cars hyper flash for both. To fix this, u will need to install load resistors in the front. See video description for info
@slav801 Its cleaner looking, its white and not that yellowish white and uses less power. So if I accidentally left my interior lights on by accident, I can still start up my car the next day. With regular bulbs, your battery would be dead the next morning.
@Kamry215 Pull down the light fixture and pry apart the plastic tabs to gain access to bulbs. If you read the video description, you would see that I have a link to DIY and Tutorial to ToyotaNation. In this link, will be links to instructions for various LED projects.
where did you got the led white bulbs, i m doing a bride fabric custom interior on my car, because i have bride bucket seats, will like some good led lighting.
@crysisdood Whether you do front only, back only or both, you need resistor. LEDs dont use a lot of voltage so the car will think you have a burnt bulb even though its working.
@crysisdood Since I have LEDs for my front and rear turn signals, I needed to install load resistors so that they dont hyperflash and no bulb out warning on dash. I placed the load resistors in the rear inside the trunk as its the easiest place to access/install without having to take off bumper. I only needed 2 load resistors for front and rear LEDs.
@crysisdood Its ugly looking and LEDs uses less voltage. My battery will last longer. Not to mention, if a light is left on inside the car for 1-3 days, I'm still able to start my car the next day.
any problems with brightness as far as front turn signals go? I've been reading the reviews on V LEDS and it seems brightness is an issue when turning.
@Ethanual Thanks. Unfortunately, that will have to wait if I was to do the video. We recently got hit with a tornado and trees got uprooted. A huge branch hit my rear driver side quarter panel. So it would need to be replaced.
Cathode is the negative side of an led so what you just but half an led in your trunk i will laugh if you didnt use the proper resistors short out your lighting board lol that would be funny
Cool. Now your Toyota has all led lights and you use safety as a writeoff for the money you spent and the video you made. And stock Toyota blinkers are great even in the day
what in the effing world would make you post a video of your led lights? I've got all the same LEDs and more in my Silverado but I'm not gay enough to make a video for it lmao
Hey man I got some eagle eye taillights and on the corners of the big ones there are indentions on the mirrored part in the inside of the light. Is yours like that? Just want to make sure that is normal. Thanks.
@taeho85 You need only 1 flasher module. Its replacing the stock flasher module behind the instrument cluster. If you're going with load resistors, you need 2.
@taeho85 The flasher module is behind instrument cluster. Load resistors taps into any blinker wires whether its front or rear. Rear is easier since its behind the carpet in the trunk. Everything you need to know with Do-It-Yourselfs (DIY) is on Toyo
This vid went viral on Trinidad and Tobago
eddykoch1129 1 week ago
an awesome car indeed
StraySilence 2 weeks ago
know anyway to buy them or ccfl headlight for 2011 camry se?
FunnyBunny1108 3 weeks ago
How did you get black housing for the headlights?
FunnyBunny1108 3 weeks ago
@FunnyBunny1108 headlight is retrofitted with TSX headlights. So its custom and paintpainted.
dcemureviews 3 weeks ago
@FunnyBunny1108 no
dcemureviews 3 weeks ago
Comment removed
FunnyBunny1108 4 weeks ago
Your video is a favorite on Bolivia
trumanpugh614 1 month ago
@trumanpugh614 Awesome! Thanks!
dcemureviews 1 month ago
how do you take apart the back seat lights iam having trouble with those two lights i can't figure it out ?
noxsg6 2 months ago
@noxsg6 Read video description. Look at the Master LED List on ToyotaNation. There are tutorials
dcemureviews 2 months ago
Them tail lights are bad ass. I have a 2010 se so I already have led I was thinking of tinting my tails? My glove box light don't work and I don't even know how to replace it, I want to do it red led
JABoucher09 3 months ago
@JABoucher09 Glove box light only comes on when headlights are on. Go to my CarDomain page for a DIY on how to access glove box light.
dcemureviews 3 months ago
its a Christmas tree! nice job bro looks clean!
ThroneDrei00 3 months ago
the same bulbs you use for the map lights you can use for the courtesy lights and the rear reading lights as wells right? im sorry im really new at this stuff.
parin578 3 months ago
@parin578 yes. They are the same size bulbs.
dcemureviews 3 months ago
Take that shit off your steering wheel men!
altistsss999 4 months ago
@dcemureviews Thank i got it all figured out.
movetoyou 4 months ago
For the light that is in the middle of the map light I try replacing it with a LED's and when I put the LED bulb in it didn't work. So I got the old light bulb and that is now not working either. I noticed that the bulb doesn't really sit right. What should I do?
movetoyou 4 months ago
@movetoyou twist the bulb around. led probably works one way or return it. If turning the led around still doesn't work, led can be defective
dcemureviews 4 months ago
hey i was thinking about putting new bulbs for my DRLs, like the 55w white bulbs, is that a good or bad idea? i see urs a stock.
navidb7 4 months ago
@navidb7 My DRLs/HighBeams are Super White H11 bulbs. DRLs put out low wattage so no matter what you put, its going to look yellow and dim. Putting a 55w as DRL will do nothing because it will not be using full power except when using highbeam and using that will only blind on coming traffic.
dcemureviews 4 months ago
lights lights lights crash no lights just sparks
cholomackdaddy 5 months ago
Really nice job, man.
Great video. Keep it up! :)
Thanks!
TT01RCDrift 5 months ago
Stickshift is a mans car
TheBadbowman 5 months ago
Nice work mate.
But the steering wheel's on the wrong side. ;P
asiancars25sms 5 months ago
Yeah wtf do you want a fairy to come lift up your trunk while you reach into it? Fuck you this toyota is better than your honda accord
FromThe3PointLine 5 months ago
where did u bu the tail lights! looks awesome man.. and the led lights from your car?
ieon 6 months ago
@ieon Tail lights are from eBay. Read video description. I provided links to site to purchase LED or click on link for Master LED List for more sites that sells LEDs.
dcemureviews 6 months ago
Hey, how can i get to the bulb in the glove box??? Its giving me a hard time to get it out. Thanks.
Jeison2784 6 months ago
@Jeison2784 Use a mirror and pliers to remove bulb or go to the Master LED thread list for DIY or my CarDomain page. All links are in video description.
dcemureviews 6 months ago
GREATEST CAR ON EARTH
realtv1982 6 months ago
i luv tht car man
leone0105 6 months ago
Fagggggooottttt, yaa made in japan alright
truckman1693 6 months ago
this made in japan ??
d8o0oKg 6 months ago
this is why honda's will always kick toyotas ass in performance. accord and civic have every aftermarket part you could ever want.. and camry well we got LED bulbs
BVMUSICNJ 6 months ago
it looks sick bro. da links u showed will those bulbs fit into camry se 11
nachdapunjab786 6 months ago
WTF gooseneck trunk hinges? Shameful Toyota. And you're lucky the car doesn't sense bulb failures like my VW or you'd have to get resistors on ALL those exterior lights...and uh...short of the map and dome lights, all my interior lights are LED from the factory.
yellowmusicfreak 7 months ago
i see you can remove 8 green capsules for radio light but where can that be found?
changmin0123 7 months ago
@changmin0123 You have to take the radio apart.
dcemureviews 7 months ago
@dcemureviews i finally got the radio, thank you. noww hvac controls is it okay if i just took the green tabs off just like the radio?
changmin0123 7 months ago
@changmin0123 HVAC is fine also. Instead of greenish look, it will be blue. If you want to change the color to something else, you'll need to desolder the old LED and resolder new ones. Information is found on ToyotaNation.
dcemureviews 7 months ago
Might sound like a dumn question but i recently got a 2011 camry se w/ sunroof, and i wanted to know if all of the 194 bulbs you got are the same kind.
thank you
xXGmaineXx 7 months ago
@xXGmaineXx The Master LED List link in video description has EVERY LED bulb size for Gen 6 (2007-2009) to Gen 6.5 (2010-2011). Since you have sunroof, like me, what I posted in video description is the same you'll need in yours (all lights overhead will be LED size 194). For those who DO NOT have a sunroof, the map light in the middle of the headliner would be LED size 3022.
dcemureviews 7 months ago
how is your speed odometer thingy so bright white.
how do you change that??
changmin0123 7 months ago
@changmin0123 Speedometer is stock. I did not change it. On ToyotaNation, some members have changed the color of the need and changed it from white to blue. They also posted DIY and other information. To change the color of the white background on speedometer, it requires desoldering stock LEDs and soldering new blue LEDs.
dcemureviews 7 months ago
did u need to have a load resistor for the low beam headlights??? i want to buy LED low beam 9006 12v from ebay. i think it should be plug and play.
lalibilalibiwith 8 months ago
@lalibilalibiwith I don't know what car you have but Camry's low beam and fogs are H11. Secondly, you CAN NOT put LEDs in low beams because LEDs are not bright enough to light up the road. Not only that, you'll fail inspection and its dangerous to not only you, your passengers, pedestrians and other drivers because its not bright enough to be headlight. LED in high beams/DRLs is also a NO-NO because you lose high beam function and you also won't pass inspection.
dcemureviews 7 months ago
@toyota4life94 No because it was purchased awhile ago. Do a search on ebay for "trd license plate" its not that hard. If its not there in the search on ebay, than its no longer available.
dcemureviews 8 months ago
@toyota4life94 Plates were purchased from eBay
dcemureviews 8 months ago
how did u open up the reading lights in the back. i tried opening them up but its really stuck..do u have any idea on how i should open it... and also how did u change the color of the signal on the inside and the parking lights inside. please let me know asap
nbhatt786 8 months ago
@nbhatt786 Read the video description. Link to tutorials and DIY is in there. All your answers are answered in the video description. Turn signals are LED that are switchbacks.
dcemureviews 8 months ago
how did you change your reading light ?
barvenstrife 8 months ago
@barvenstrife Read video description. There is a link to Master LED List to ToyotaNation. The link has links to DIY and tutorials.
dcemureviews 8 months ago
@supermoeyy Toyota dealership
dcemureviews 8 months ago
how much did you spend on all those customizations?
117AsainBoy117 9 months ago
@117AsainBoy117 TRD dual exhaust-$740
Interior/Exterior LEDs-about $200
LED Tails-$220
retrofitted headlights w/Acura TSX projectors+parts-$700-800
35% tints-$125
Viper 5701 alarm/remote start w/install-$400
Valentine 1 radar detector-$400
V1 concealed display w/modded LEDs-$85
Prices do not include discounts or selling old parts. I have a bunch of other mods listed in my CarDomain (link in video description)
dcemureviews 9 months ago
okay thanks
bxdispatch 9 months ago
did u install the switchbacks yourself?
bxdispatch 9 months ago
@bxdispatch Yes.
dcemureviews 9 months ago
where did you get the work done at?
bxdispatch 9 months ago
@bxdispatch Get what work done? I installed the LEDs myself.
dcemureviews 9 months ago
where did you get the housing for your headlights?
crazygooseg8 9 months ago
@crazygooseg8 Headlights are OEM (originals). They were custom painted.
dcemureviews 9 months ago
كلام
تصلنا من عبداللطيف مشلحة و مسروقة
هاي السيارات
Hamzooni 9 months ago
so for the dome light 194 is for all the camrey models?
TheKevin34162 9 months ago
@TheKevin34162 No. 194 for dome light is only if you have sunroof on a 2007 and up. If you have no sunroof, the LED bulb is 3022. Read video description for link to ToyotaNation Master LED list. It has all the LED bulb sizes you need to find out.
dcemureviews 9 months ago
@dcemureviews se model same thing?
TheKevin34162 9 months ago
@TheKevin34162 It's 194 if you have sunroof regardless of what model you have whether its LE, XLE or SE.
dcemureviews 9 months ago
This is awesome! Thanks for the great vid!!
doc22g 9 months ago
Can you tell me how to take the front head light out to change
side marker bulb on my 2010 toyota camry thank you !!!!!
taxi2564 9 months ago
@taxi2564 You do not have to remove the front head lights. Pull back the wheel well cover where the tires are shove your hands inside. Instructions are the same as 2007-2009.
dcemureviews 9 months ago
where di u buy your visors at?
TheKevin34162 9 months ago
@TheKevin34162 Are you talking about the LEDs or the visor itself? If LEDs, link is in video description. If visors, they came with the car.
dcemureviews 9 months ago
where did you get the steering wheel cover from? Please Please get back to me
kareem111111 10 months ago
@kareem111111 Steering wheel cover was purchased off of Amazon. You can get it from any auto shop. Its not one of those slip on type. The leather goes over the steering wheel but uses nylon string to keep it in place.
dcemureviews 10 months ago
Can you provide me with a link on how I can change the rear reading light on a 2010 camry. I would really appreciate it.
Kamryman2 10 months ago
@Kamryman2 Read video description for link to Master LED list. There is link to DIY and tutorial.
dcemureviews 10 months ago
This has been flagged as spam show
Toyota Refuses to fix Toyota Camry SE 2011 power steering pump whinning. Vondalette White at Toyota Customer Experience at corporate told me to go ahead and post vidio's it won't hurt toyota sales. so look at them.
Toyotacameryse is my you tube id
ToyotaCamerySE 10 months ago
does the bulb show what size your bulb is? and do u know where to get those neon strip that hangs near the shiftnob
TheKevin34162 10 months ago
but my car is not a Toyota
TheKevin34162 10 months ago
@TheKevin34162 LED bulbs are LED bulbs. They are not car specific. Search for what LED bulb sizes your car uses and look at the site. For instance, LED bulb size #74 will work on any car that uses that size. Same for #194, #921, #3021 etc.
dcemureviews 10 months ago
where do u buy all your dome lights from?
TheKevin34162 10 months ago
@TheKevin34162 If you took the time to read the video description, there are links.
dcemureviews 10 months ago
i have a 07 camry and i have some led lights and i wanted to know what i have to do to install them.
jortiz87gto1 10 months ago
@jortiz87gto1 Read the video description for DIY and tutorials.
dcemureviews 10 months ago
yeah you do lose the brightness but all the lights on without the headlights is evil looking, and i have my factory pair just for trips and inspections so i can see and pass.
danesimp08 10 months ago
your DRL's are not led. i have them and all of my front lights are led and hid. it looks clean and think you should check it out.
danesimp08 10 months ago
@danesimp08 I do not want LEDs in my DRL because you lose hi-beam functionality. They check for this during inspection too. Not having this will fail your inspection.
dcemureviews 10 months ago
how did you change your reading lights in the back? thanks in advance :)
Mzero3 10 months ago
@Mzero3 Read previous comments and the copy in the video itself...they all tell you to go READ video description for link to Master LED thread. This has a list of LEDs you need and links to DIYs/Tutorials.
dcemureviews 10 months ago
nice document of your work on your Camry, I just purchased on myself 2011 Camry se loaded with everything that you can think of, I may want to install the #194 led lights like yours this Spring or when the weather is a bit warmer, thanks for showing us how to do it cause I check with our local guys who asks $60 for installing 1 Dome light and 2 Reading lights at the back...
tkcayc168 11 months ago
hey where did you find the led interior lights. i cant find them anywhere
lilrich1988 11 months ago
@lilrich1988 How about reading the video description? It has links and tells you what bulbs I purchased.
dcemureviews 11 months ago
Wow man, thats a lot of LED love. Looks sweet, I bet it turns heads.
vaiosoft 11 months ago
dude did u install those reading lights in the back cauz i nvr new that camry has that feature
rasooli2010 11 months ago
@rasooli2010 The car came with them. The rear reading lights is ONLY if you have sunroof. If you have no sunroof, you have dome light in the middle of the roof.
dcemureviews 11 months ago
dear , hello . how many 2009 Toyota Camry SE LED Front
taaganeable 1 year ago
@taaganeable Are you talking about the front turn signals? If so, if you click on the link in the video description, it says 60 LEDs.
dcemureviews 1 year ago
Ey man u still sell those cathode kits?
lens240 1 year ago
@lens240 Cathode kits are still available. Read video description for link to my CarDomain.
dcemureviews 1 year ago
Can you help me my friend? how to change the REAR DOME LIGHTS how to remove? thanks...
Richardte34 1 year ago
@Richardte34 Read video description. There's a link to ToyotaNation with links on tutorial on how to change rear lights.
dcemureviews 1 year ago
@dcemureviews Hi can please help... my car is a toyota venza... i dont know how to change the rear DOME LIGHT BULB..there is two small cirle like in the airplane? how to change the bulb? i mean remove? thanks...
Richardte34 1 year ago
@Richardte34 I don't own a Venza so I don't know. But if its like mine, you pull it down. Again, read video description. There's a link to ToyotaNation with links on tutorial on how to change rear lights.
dcemureviews 1 year ago
@dcemureviews They only showing old style rear lights... i got same rear dome lightswith your car my friend...
Richardte34 1 year ago
@Richardte34 Wrong...my friend.
toyotanation . com/forum / showthread.php ? t=271120
toyotanation . com/forum / showpost.php ? p=3287533&postcount=243
Remove spaces
dcemureviews 1 year ago
@dcemureviews I saw now in your video we got same rear reading lights... just like in the airplane... please help me how to remove or change the bulb thanks...
Richardte34 1 year ago
@Richardte34 I'm going to answer this one more time...READ VIDEO DESCRIPTION. There's a link to ToyotaNation with links on tutorial on how to change rear lights.
dcemureviews 1 year ago
@dcemureviews Im so sorry im new in youtube... i cant find the link you said my friend... thank you for your time...
Richardte34 1 year ago
@Richardte34 It's not hard to read. READ THE VIDEO DESCRIPTION. I have link to MASTER LED LIST on ToyotaNation (the link says toyotanation). When you click on the link, there's two links that says "Rear Reading Lights / Rear Reading Lights (Gen 6/6.5)".
dcemureviews 1 year ago
@dcemureviews Thanks I got it...
Richardte34 1 year ago
Comment removed
Richardte34 1 year ago
@dcemureviews I wanna ask you if you know if hyper flashing turn signals are illegal or not.
inNY90 1 year ago
@inNY90 I wouldnt say they are illegal but you might have a problem with inspection. And it would be annoying to drivers as well as yourself with the fast clicking sound.
dcemureviews 1 year ago
@dcemureviews ok, because I changed every bulb in my 94 accord to LEDs. When I changed the rear turn signals they didn't hyper flash. But when I put in the front turn signals, they did. Have you ever heard of this happening?
the rear are 18 LED bulbs and the front are 3 watt high power LED
inNY90 1 year ago
@inNY90 Interior LEDs don't monitor voltage of bulbs. Every manufacturer/model has different ways of how things work. What u experienced is normal. It seems the rear doesn't monitor low wattage. If u left the rear alone w/normal bulbs & for whatever reason, it blew out, u won't have hyperflash. But, if u kept the front w/normal bulbs & it blew out, it would hyper flash. Some cars hyper flash for both. To fix this, u will need to install load resistors in the front. See video description for info
dcemureviews 1 year ago
you really like led's huh? Thats cool, not bad. I really admire people who do things to their cars, good job.
slav801 1 year ago
@slav801 Its cleaner looking, its white and not that yellowish white and uses less power. So if I accidentally left my interior lights on by accident, I can still start up my car the next day. With regular bulbs, your battery would be dead the next morning.
dcemureviews 1 year ago
did you do the retrofit to your headlights?
jaguar1410 1 year ago
@jaguar1410 Yes, my headlights are retrofitted with TSX HIDs. No cheap plug and play kits.
dcemureviews 1 year ago
@jaguar1410 If your question asking if I did it myself, then no. I had someone do it for me.
dcemureviews 1 year ago
@dcemureviews yes, I was just wondering I'm currently looking to buy a 08' SE. I just thought these car's already have projector headlights?
jaguar1410 1 year ago
@jaguar1410 Camry's use regular halogen bulbs (H11).
dcemureviews 1 year ago
I have a question how did you install the rear LED dome light?
Kamry215 1 year ago
@Kamry215 Pull down the light fixture and pry apart the plastic tabs to gain access to bulbs. If you read the video description, you would see that I have a link to DIY and Tutorial to ToyotaNation. In this link, will be links to instructions for various LED projects.
dcemureviews 1 year ago
looks gorgeous bro i gotta get those signals i love vleds bulbs. i have em all ariund except for the signals gotta get em
joeyz2k 1 year ago
How did you do the turn signal (one yellow and one LED) while the daytime running lights where on?
counkev 1 year ago
@counkev If you read the video description, you would see that the turn signals are switchback LEDs.
dcemureviews 1 year ago
they consume less electricity so theres not too much strain on the battery :)
NikeMike417 1 year ago
nice yota .. i bought some led for my 4runner and they said they were white but its a blue-ish color does ur led are the same ?
fronteraomar 1 year ago
@fronteraomar All white LEDs will have a slight blue color to it. They are usually either 5000k or 6000k
dcemureviews 1 year ago
the hyundai genesis has all led interior lights.
maeng97 1 year ago
yo how did you install the turn signals? did you have to go through the wheel well?
cjpiz7777 1 year ago
@cjpiz7777 If you're talking about the front turn signals, yes, through the wheel well. The back turn signals are from inside the trunk
dcemureviews 1 year ago
@dcemureviews sick man thanks, got all my interior led's now waiting for fogs and my switchbacks in the mail..
cjpiz7777 1 year ago
Nice.
RandomTutsAndStuff 1 year ago
where did you got the led white bulbs, i m doing a bride fabric custom interior on my car, because i have bride bucket seats, will like some good led lighting.
00telehit 1 year ago
@00telehit At least take the time and look at the video description. Links are there!
dcemureviews 1 year ago
ask somebody to help you next time
ohyes1001 1 year ago
good!
MyTOYOTAMAN 1 year ago
@crysisdood Whether you do front only, back only or both, you need resistor. LEDs dont use a lot of voltage so the car will think you have a burnt bulb even though its working.
dcemureviews 1 year ago
@crysisdood Since I have LEDs for my front and rear turn signals, I needed to install load resistors so that they dont hyperflash and no bulb out warning on dash. I placed the load resistors in the rear inside the trunk as its the easiest place to access/install without having to take off bumper. I only needed 2 load resistors for front and rear LEDs.
dcemureviews 1 year ago
@crysisdood Its ugly looking and LEDs uses less voltage. My battery will last longer. Not to mention, if a light is left on inside the car for 1-3 days, I'm still able to start my car the next day.
dcemureviews 1 year ago
any problems with brightness as far as front turn signals go? I've been reading the reviews on V LEDS and it seems brightness is an issue when turning.
On the video yours seem fine..
Rac665 1 year ago
@Rac665 I have no problems with brightness during the day.
dcemureviews 1 year ago
Look good bro! I'm doing an exterior LED conversion on my Dodge Shadow turbo soon to be inside.
rosscoe01 1 year ago
Hell yes, pretty awesome job with Camry's lights.
More Lexurious style :)
VinnieFIN 1 year ago
@Ethanual Thanks. Unfortunately, that will have to wait if I was to do the video. We recently got hit with a tornado and trees got uprooted. A huge branch hit my rear driver side quarter panel. So it would need to be replaced.
dcemureviews 1 year ago
how do you replace the front led turn signal lights ?
loveleesr 1 year ago
@loveleesr Through the wheel well and put your hand inside and reach for the bulb.
dcemureviews 1 year ago
This has been flagged as spam show
reverse + ebrake .. serious?
ulrblitzer 1 year ago
reverse + ebrake .. serious?
ulrblitzer 1 year ago
@ulrblitzer
I was thinking the same thing...
f15x28isback 1 year ago
Camry is the best.
blankmaninky 1 year ago
Nice ride. The camry is a great car. I really like the se v6. Tops the competition by far.
blankmaninky 1 year ago
how did u change the vanity lights?
hy3ba11er 1 year ago
@hy3ba11er Take a flat head screwdriver and pop out the clear covers. There are DIY tutorials on ToyotaNation
dcemureviews 1 year ago
That's a BEAUTY^^
nietsmmar2 1 year ago
Cathode is the negative side of an led so what you just but half an led in your trunk i will laugh if you didnt use the proper resistors short out your lighting board lol that would be funny
psnjuggalo420killa 1 year ago
Cool. Now your Toyota has all led lights and you use safety as a writeoff for the money you spent and the video you made. And stock Toyota blinkers are great even in the day
paintballgundown8 1 year ago
Wow. This was really exciting. I'm so glad modern technology grants the capability to be recommended such mundane subject matter.
brianismynamo55 1 year ago
WOULD HAVE BEEN BETTER IN NIGHT TIME SMH
A20095060 1 year ago
dude i dont see anywhere on how to install the vanity lights, correct me if im wrong and give me a link to some instructions>>>>>
LocoHispano86 1 year ago
hey um i got the same year as your cammry too but i cant figure out how to take out the back light panel so if u can tell me how
lilmizzmuas 1 year ago
what in the effing world would make you post a video of your led lights? I've got all the same LEDs and more in my Silverado but I'm not gay enough to make a video for it lmao
SXRguyinMA 1 year ago
@SXRguyinMA hahaha
dpowersblink182 1 year ago
@SXRguyinMA but you were gay enough to sit there and watch it. STOP THE HATE!!! LOL
birdman1910 1 year ago
you have an amazing car...amen
shadow479 1 year ago
Cathodes in your trunk...so it's not a "Full LED" conversion LOL.
professorxox 1 year ago
i have the same LED in my 09 camry
Choppa438 1 year ago
Comment removed
AznVamp24 1 year ago
That's a hella nice looking Camry. I was thinking of getting either this or an eclipse gt.
anime891 1 year ago
i have a 09 camry xle n i wanted to know the size of the buld that i need to buy for the front led
dimemenor 1 year ago
@dimemenor If you read the video description, you would see that the bulb size is already posted.
dcemureviews 1 year ago
@dimemenor If you have a death wish, Camry is the car for you !
ausbegosh 1 year ago
Hey man I got some eagle eye taillights and on the corners of the big ones there are indentions on the mirrored part in the inside of the light. Is yours like that? Just want to make sure that is normal. Thanks.
JFSI84 1 year ago
@JFSI84 I have no idea what you're talking about.
dcemureviews 1 year ago
just to be clear sir, how many flasher module do i need for front and back side marker lights
taeho85 1 year ago
@taeho85 You need only 1 flasher module. Its replacing the stock flasher module behind the instrument cluster. If you're going with load resistors, you need 2.
dcemureviews 1 year ago
@taeho85 The flasher module is behind instrument cluster. Load resistors taps into any blinker wires whether its front or rear. Rear is easier since its behind the carpet in the trunk. Everything you need to know with Do-It-Yourselfs (DIY) is on Toyo