Thanks man. I was checking out your 2nd gear clutch ups. You make it look so easy. All my buddies are doing sit downs on their 1K and I just want to get comfortable on my standups...
for practice those are relle good wheelies im trying to learn how to do clutch ups i can get the wheel up off of power but can ride it do to already being in high rpms i just cant seem to get my clutch ups down maybe ill watch down shifts vids nice vid tho
@flypunk90 the main way to hurt a clutch is by riding it. What i mean by that is holding the clutch a little in and going. Hes letting it all the way out really fast so it barely does any wear.
@bdj00lz Thanks for the advice! I checked tire pressure earlier this week and I was at 30PSI in each tire so I inflated both of them to 35PSI, says max load pressure is 42PSI. What PSI do you recommend?
Any advice on what I wrote to @kailly000 about 1st gear to 2nd gear clutch ups?
@Kailly000 I was forced to buy a brand new rear Michelin Pilot Power last September after running over a piece of glass, so I would think the tire isn't the problem. Could be weather, and not having the tires warmed up yet. What changes in throttle/clutch do you perform when doing a 2nd gear clutch up versus a 1st gear? In 1st I have been keeping my throttle in 1 constant position and just quickly popping the clutch, no extra revving while pulling in the clutch. I have examples on my channel.
Call me a noob if you want but most of the time when clutch up in 2nd my rear tire breaks loose and spins. I can pull it up but just not as consistantly as I'd like too. Any suggestions? I ride an 04 CBR600RR with stock sprockets.
@Eddythefork Unless your doing it wrong like a NOOB fag that you are. ANY bike even a 250 has more then enough power to ride stand ups ALL day long. its all about skill and practice and cover that rear brake.
@Eddythefork The list of mods is way to big to put in here but ill tell u this, it as a Yoshi rs-5 carbon fiber slip-on, Arrow stainless headers, K&N air filter, Pair Mod, Power Commander 3 already Dyno tuned and Stock sprockets.
Im thinking of going +5 in the rear as i prefer torque instead of top speed.
Nice video;) Try rendering it with a higher bitrate. That way it looks nicer on youtube. see my video as an example;). I can also send a vid of me riding.
are you freaking trying to clutch-up while doing a wheelie?
junkano 6 days ago
Omg that sound when you pop the clutch is one of the best in the world !! :)
Cy8ErM0NsT4 1 month ago
man that little small pause before it screams and comes up ...... there's nothing like that sound...HEAVEN
lpayne9856 2 months ago
Thanks man. I was checking out your 2nd gear clutch ups. You make it look so easy. All my buddies are doing sit downs on their 1K and I just want to get comfortable on my standups...
sfatsura 2 months ago
I have a stock 2008 CBR 600 RR and I'm learning to clutch up. I can't seem to pick it up at 8K rpm. Could it be my sprockets???
sfatsura 2 months ago
@sfatsura Try going -1 up front, ull like it ;)
Kailly000 2 months ago
really nice, i have a HONDA CBR 600 rr two
LEXCMI 2 months ago
cooooooooool video
LEXCMI 2 months ago
shadow at 32 seconds looks like he's smoking a pipe... that would be badass..
Spence228 4 months ago
awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
MrMonster1098 5 months ago
Perfect life!!
muskelmann006 5 months ago
YUT UGHHHHH!!!
MrDrBulla 5 months ago
@MrDrBulla GOT DRIFT???
Kailly000 5 months ago
@Kailly000 Mate, please... my bikez a 600, 750 and a 1000. Of course i guts drifts!
MrDrBulla 5 months ago
@MrDrBulla BOTH BRAKES????????
Kailly000 5 months ago
@Kailly000 Yuh huh
D-bag stunts 4 lyfe
I'm sick of quoting this loser...
MrDrBulla 5 months ago
@MrDrBulla HAHAHAHAHAHAHA!!!
Kailly000 5 months ago
if you must do that i'm glad you showed everyone to suit up. thumbs up :)
goddardjock 6 months ago 3
what wud u recommend 600rr or r6? which sounds better with leo vince slipon?
o0jun0o 7 months ago
@o0jun0o I hate the leo vince on the 600rr but on the r6 it looks and sounds good
Kailly000 7 months ago
what kind of pipes you have on your bike, i fucking love the sound?
junior12343 7 months ago
@junior12343 Yoshi rs-5 with arrow headers
Kailly000 7 months ago
Fucking eargasm when u pop the clutch ! ^^
sandokan204 7 months ago 15
@sandokan204 HAHAHAHAHA xD
Kailly000 7 months ago
muito bom façam mais sou grande fã podem dizer qual
e a zona do país
697hugo 7 months ago in playlist motorcycle vids
@697hugo Norte
Kailly000 7 months ago
if you did this in the netherlands... 3123 cop cars behind you because they want money
DestroyXXL 8 months ago
@DestroyXXL
and they want your license (artikel 5) sick mate
NwlDeem 8 months ago
@NwlDeem even if they see the queen doing 1 little thing... they will give her a ticket.. dutch people are knows as creed people uuuughhh!
DestroyXXL 8 months ago
@DestroyXXL nah they dont give her a ticket.. thats the worse thing higher ppl wont get it but the make worser faults than us
NwlDeem 7 months ago
lovely bike chief, i rode 08 600RR yesterday first time, was great bit of kit
1000RRboyJay 8 months ago
for practice those are relle good wheelies im trying to learn how to do clutch ups i can get the wheel up off of power but can ride it do to already being in high rpms i just cant seem to get my clutch ups down maybe ill watch down shifts vids nice vid tho
cristyler23 8 months ago
Love the camera position, I think its the best out of any go pro spot
flameben111 8 months ago
Nice bike.. im thinkin about trading my r6 for one
R6craze 8 months ago
can you say HOW your doing them?
jeepnix1 8 months ago
@jeepnix1 Check out downshift83's wheelie tutorial videos ;)
Kailly000 8 months ago
check out ANDYBARSBLADE
MCC6600 8 months ago
what levers are those??
Amazing wheelies and that exhaust !<3
dude193547 8 months ago
@dude193547 Pazzo Levers ( short ) and yoshi rs-5 CF
Kailly000 8 months ago
awesome riding, nice vid
stockwatch1126 8 months ago
aaaaaannndddd...my insurance just went up.
bandsaw000o0 9 months ago
How did you mount your GoPro to your helmet??
Tetra84 9 months ago
@Tetra84 Suction Cup that came with the camera.
Kailly000 9 months ago
Hello guys, I'm willing to get a 600cc, will that burn my clutch?
flypunk90 9 months ago
@flypunk90 what?
RikunoFilms 8 months ago
@RikunoFilms the guy on this video performs lots of clutch ups, i would like to know if that will burn my clutch if I do it...
flypunk90 8 months ago
@flypunk90 the main way to hurt a clutch is by riding it. What i mean by that is holding the clutch a little in and going. Hes letting it all the way out really fast so it barely does any wear.
RikunoFilms 8 months ago
nice bikes nice race,but still always be careful on the road:) video 5/5
DjPTKurczak1990 9 months ago
@kailly, how long have you been wheelieing now??
sslaxin19 10 months ago
@sslaxin19 8 months +-, ive improved a lot since i made this video
Kailly000 10 months ago
@Kailly000 so put in more videos ;)
DaniD1994 8 months ago
You've got your own business or ur employed somewhere ? your cbr isn't cheap :)
awesome riding
piter1252 10 months ago
@piter1252 Yeah i got a job, lolololol :P
Kailly000 10 months ago 7
@piter1252 bikes are cheap!
aaronc608 9 months ago
@aaronc608 not for me :(
piter1252 9 months ago
@bdj00lz Thanks for the advice! I checked tire pressure earlier this week and I was at 30PSI in each tire so I inflated both of them to 35PSI, says max load pressure is 42PSI. What PSI do you recommend?
Any advice on what I wrote to @kailly000 about 1st gear to 2nd gear clutch ups?
tonski2006 10 months ago
@tonski2006 Checkout Downshift83's tutorial videos, they helped me a lot!
Kailly000 10 months ago
@Kailly000 I was forced to buy a brand new rear Michelin Pilot Power last September after running over a piece of glass, so I would think the tire isn't the problem. Could be weather, and not having the tires warmed up yet. What changes in throttle/clutch do you perform when doing a 2nd gear clutch up versus a 1st gear? In 1st I have been keeping my throttle in 1 constant position and just quickly popping the clutch, no extra revving while pulling in the clutch. I have examples on my channel.
tonski2006 11 months ago
Call me a noob if you want but most of the time when clutch up in 2nd my rear tire breaks loose and spins. I can pull it up but just not as consistantly as I'd like too. Any suggestions? I ride an 04 CBR600RR with stock sprockets.
tonski2006 11 months ago
@tonski2006 Maybe get some better tires, i have pirellis diablo rosso corsa, its either that or the weather where u live might be to cold.
Kailly000 11 months ago
@tonski2006 yo dude just take 5-10psi out of your rear tire should help with the slip and make it come up a little easier also.
bdj00lz 10 months ago
@Eddythefork no worries.
Goku33333 11 months ago
@Eddythefork Unless your doing it wrong like a NOOB fag that you are. ANY bike even a 250 has more then enough power to ride stand ups ALL day long. its all about skill and practice and cover that rear brake.
Goku33333 11 months ago
were is this
con3legend 11 months ago
learn how to grab a gear and keep the front like 3inches higher....be able to go for more than 4 seconds.
jrom750 11 months ago
friend on red/white bike way better wheeling than you ;)
bring it up higher so you hit balance point
sszgo 11 months ago
tight vid- loving the sound of your cbr - i had a 07 cbr previous to my 09 zx6 :)
coreo1874 11 months ago
hit your balance point faster ur nbot really hitting it at all
MyMadmax666 1 year ago
2.23 or ear orgasm
kurtistjones 1 year ago
sick wheliees and great vid quality. gopro hd ftw!!
IvaNavia 1 year ago 3
very beautiful video . love cbr family
Antonio9069455 1 year ago
quality
MCC6600 1 year ago
Awesome camera awesome bikes awesome vid. And your mate has the same helmet as me! whey
Griff666 1 year ago
sweet wheelies and love the angles you make good videos. nice on wearing gear to ride safe.
Kawasakirocks333 1 year ago
@Eddythefork With stock sprockets its kinda hard to power wheelie in 2nd gear thou ive been able to do it while doing stand ups.
As for 3rd gear its very hard and ive never been able to do it.
Kailly000 1 year ago
@Kailly000 i hear ya
jjjester123321 1 year ago
@Eddythefork The list of mods is way to big to put in here but ill tell u this, it as a Yoshi rs-5 carbon fiber slip-on, Arrow stainless headers, K&N air filter, Pair Mod, Power Commander 3 already Dyno tuned and Stock sprockets.
Im thinking of going +5 in the rear as i prefer torque instead of top speed.
Kailly000 1 year ago
how do you like those asv shorty's?
smcgee1516 1 year ago
@smcgee1516 Loving the agressive look and they feel alot better than those big stock levers. They're Pazzo levers btw. :P
Kailly000 1 year ago
@Kailly000 i got the same ones. theyre fuckin sick
jjjester123321 1 year ago
@MrGlassAddict 2nd gear around 7000 rpm, i use the speed (km/h) to guide myself, not the rpms. I can clutch her up betwen 40 km/h and 120 km/h.
Kailly000 1 year ago
Nice video;) Try rendering it with a higher bitrate. That way it looks nicer on youtube. see my video as an example;). I can also send a vid of me riding.
rboeyen 1 year ago