I know this system. Please search for DJFireUSA and you will find a video of 8 Tir3's, hide-a-way strobes, and siren / pa with dual horns on my goldwing.
Set your Tir3's to the steady burn (To change flash pattern to steady burn touch white wire to power while unit is powered on. Each time you touch the white wire to power, the flash pattern will change. Phase 1, then same pattern in phase two, then new pattern in phase one, etc etc etc.)
This is SWEET! I bought the Sho-me 11.1010SF flasher and installed it but can not get the same patterns seen here. Were you changing the pattern throughout? Which mode wire did you use?
Hi, i have 4 TIR3s. I'm thinking of installing a whelen flasher ulf44 to it, but which pattern on the TIR3 should i set it to for the flasher to work properly. I read somewhere it needs to be on the steady burn, but i can't seem to get mine to steady burn. help .
If you have a TIR3 whelen their come with steady bur, use the flash pattern wire to change, the last one is stady burn, connect for 1 second to positive...
Flash patterns Outputs 1 and 2:Double, Quad and Mega Alternating Flash; Single, Quad and Quint Simultaneous Flash; Random Outputs 3 and 4: Double, Quad and Mega Alternating Flash; Single, Quad and Quint Simultaneous Flash; Random All Outputs: Sweep, Alternating 1-2 3-4, Alternating 1-3 2-4, Quad Alternating
Exactly, you just need a flasher Led, this one are Sho me, put the tir3 in steady burn and connect to the flasher... i know a flasher with 8 output... awesome
I think these are set to steady-burn and hooked up to a remote LED-flasher. The patterns shown are not inside a TIR, there is no way to sync them like that in those patterns without an external flasher
I work for EVFD and have two TIR3 sync in the grill but the flash patterns are nothing like that. How did you get the patterns for those TIR3s? Are those 4 light heads just normal TIR3s sync together?
How was this done? External Flasher?
joevs21001 1 year ago
I know this system. Please search for DJFireUSA and you will find a video of 8 Tir3's, hide-a-way strobes, and siren / pa with dual horns on my goldwing.
Set your Tir3's to the steady burn (To change flash pattern to steady burn touch white wire to power while unit is powered on. Each time you touch the white wire to power, the flash pattern will change. Phase 1, then same pattern in phase two, then new pattern in phase one, etc etc etc.)
Hope that helps!
DJFireUSA 2 years ago
I purchased one of the 11.1010SF flashers. It came today but mine did not have a rotate switch on it. This is the correct model isn't it ?
Aviddac 2 years ago
I dont remember how to use it, I dont have this flasher any more, I put this video maybe 2 years ago...
changchung 2 years ago
This is SWEET! I bought the Sho-me 11.1010SF flasher and installed it but can not get the same patterns seen here. Were you changing the pattern throughout? Which mode wire did you use?
aquafires123 2 years ago
That's awesome
RatPatrol4X4 2 years ago
That is the first hi speed flash patterns i have ever seen on a bar light. What did u use to build it or did u buy it?
ten8goa 3 years ago
Sho-me 11.1010SF 4-Output LED Flasher and 4 tir3 whelen in burn option...
changchung 3 years ago
hi! do you need a separate switch to select flash patterns or just this Able 2 Sho-Me 4-Output LED Flasher 11.1010SF?
maloney888 3 years ago
The flasher had a rotate switch...
changchung 3 years ago
thanks for your reply. What brand and model is the rotate switch used on this setup.?
maloney888 3 years ago
What do you think setting these TIR3's on grill 4" apart? Do you think they will look better specially on random outputs?!
maloney888 3 years ago
you must be my twin. lol I love lights as well and have to many ..and my wife gets mad at me for spending more time with my lights than with her. lol
Memorial911 3 years ago
Hi, i have 4 TIR3s. I'm thinking of installing a whelen flasher ulf44 to it, but which pattern on the TIR3 should i set it to for the flasher to work properly. I read somewhere it needs to be on the steady burn, but i can't seem to get mine to steady burn. help .
arvidgunardi 3 years ago
If you have a TIR3 whelen their come with steady bur, use the flash pattern wire to change, the last one is stady burn, connect for 1 second to positive...
changchung 3 years ago
Great job! Make these and sell them on EBay! I would buy a few! Cheers!
detailwerkz 4 years ago
Looks great!! Buen trabajo :) How many flash patterns does the flasher that you used have?
xmishuevos69 4 years ago
Hi, thanks, 11.1010SF 4-Output LED Flasher
Flash patterns Outputs 1 and 2:Double, Quad and Mega Alternating Flash; Single, Quad and Quint Simultaneous Flash; Random Outputs 3 and 4: Double, Quad and Mega Alternating Flash; Single, Quad and Quint Simultaneous Flash; Random All Outputs: Sweep, Alternating 1-2 3-4, Alternating 1-3 2-4, Quad Alternating
changchung 4 years ago
Hello can you please let me know how to get one of these strobes to work in doors / at home etc ? equipement needed please ?
I live in England UK
Thankyou
lexusv8 4 years ago
Hi, is not strobes, are Leds, whelen tir3, you can use any power supply 12volts dc regulated... good luck...
changchung 4 years ago
are those in a lightbar, or just mounted together.
CtFdPoSt330 4 years ago
4 tir3 with a sho me led flasher 4 outputs...
changchung 4 years ago
What sho me led flasher did you use?
Lewesfd 4 years ago
I dont remember the model, this one have 4 outputs
changchung 4 years ago
WOW Is Very very Nice Good....
corazon20 4 years ago
The tir3 has a grey wire and can be sinc together.
there are 11 patterns in a tir3 , and then there are 7 additional patterns with the sync wire in use.
wgolpe 4 years ago
Do you have an american website?
squigee62090 4 years ago
No, but if you need something from me i can send you via postal service...
changchung 4 years ago
alright, thanks
squigee62090 4 years ago
Ebay? Are you selling these?
squigee62090 4 years ago
No, i buy for test...
changchung 4 years ago
Exactly, you just need a flasher Led, this one are Sho me, put the tir3 in steady burn and connect to the flasher... i know a flasher with 8 output... awesome
changchung 5 years ago
I think these are set to steady-burn and hooked up to a remote LED-flasher. The patterns shown are not inside a TIR, there is no way to sync them like that in those patterns without an external flasher
fopneus 5 years ago
I work for EVFD and have two TIR3 sync in the grill but the flash patterns are nothing like that. How did you get the patterns for those TIR3s? Are those 4 light heads just normal TIR3s sync together?
wallaby1385 5 years ago
Nice
blueagent1 5 years ago
Veeryyy Nice... Thanks
changchung 5 years ago