wow 22 pounds of boost and only 306? nice neon bro... Bisimotos civic is over 700 hp... not even 22 lbs of boost, SOHC... 89' Civic, that says alot to me lol. Thank god i drive an Integra... if i had that running 22 lbs of boost (assuiming rods and engine work to support it) im %100 sure id have far over that flimsy 309, theres all motor civic where i live pushing 400... its your money though lol oh well
@2ZZGECelica thank you! lol these people are fucking retarted like how do you not understand that different turbos make different power at the same psi there isnt a set hp for psi.. for example "25 psi doesnt always mean its going to add 200 hp" 25 psi on a gt35r could put out 400 hp persay.. and a stock dsm turbo would be spinning at 25psi but making no more power than if it were spinning at 15 psi lol people are dumb
@TheSchmiders your a fucking moron.. do you not understand that different turbo's make more power at different psi? theres no set hp mark for a certain psi you fucking noob.. good read up a little bit on forced induction before making a dumbass comment on something like this smfh.. one turbo at 20 psi can make 250hp and a different turbo can make 600hp.. it all matters on the size.. what its designed to run at.. all these factors play into the hp you make with the psi
@TheSchmiders and good ahead and try and throw a turbo on that civic thats putting down 400 to the wheels naturally aspirated.. the compression is so high that you blow that motor right up with forced induction you would have to completely rebuild that engine to run forced induction
@BudBudSounds Okay so under $1000 spent on lower cr Pistons and rods, delay the cam gears.... sorrrryyyy there ya go rocket scientist! Holy Crap people...
@TheSchmiders dude your not getting 400 whp out of an NA civic without MAJOR major major work lol thats like almost tripling the power without forced induction its not easy to do..
@BudBudSounds I know that, but when youre done building it... theres honestly no better feeling... and Im turboing my Integra (B19c) and that can handle up to 12 psi stock, but im going to get new pistons and rods and run a lower cr ratio. That will only run me like $800. And it already keeps up with the SRT's around here (sadly most people think their stock SRT can take on a lambo.) nobody BUILDS cars anymore these days :(
@devilwearsprada2100 sigh,...i was gonna call b.s. and wave my flag..but i just dont care enough to prove the point..but 600 hp on 93 with mopar bolt-ons?..next your gonna say ur using the stock internals...sigh..
You get what you pay for, but good fun for the money as long as you don't like to accelerate and turn at the same time;) SRT 6 of the same year goes for $15-20k and is faster and way better built, try one;) 3 easy bolt-ons put you at very low 12's!
An srt4 video with no hate or any comments at all! Wow. Give it time I guess. Have 05 srt4. Got love for them. Just tired off all the ignorant hate on them. Nice car keep it up!
@AkiraSRT9 Well the truth of it is, the cars are really badly made. My brother has had 2. Really fast, and I'm amazed that it never blew up. The motor never gave us any problems, but everything around it did.
@joshuaspinks its a fucking dodge for shit sake.... what do you expect... The whole entire car SRT4 was 1 giant cut corner on dodges part... its a cheap little piece of shit... with a turbo! haha
@joshuaspinks like what? cause iv had 2, and a couple of my friends have them too and we've never had any issues besides routine maintenance. its ALWAYS a brother, or friend of a friend's uncles special cousin "that said" there "just bad" without reason or proof. if you knew the slightest bit of how well all the magor components are made on this car made you wouldn't be talking, the srt group doesn't put there name on anything "badly made"
@joshuaspinks Really? Guess I got a Wednesday model lol I agree with all you guys tho.. the car gets so much hate, and for the price and what you can do with them its pretty good! I bought mine new in 05 and use it a couple times a year, built it up with goodies but it runs like a champ! only thing that went bad on the car was a stock shaft that snapped in half when I did a really hard full boost launch! (24psi on a 50 trim)
@joshuaspinks lol, american cars for ya..... "the motor will never stop working".... yeah that would be nice if the asthetics and creature comforts of american cars didnt fall apart.... we build a mean drivetrain, then go get some McDonalds, and never remember to make the other stuff quality, same with my moms old trail blazer haha windows got stuck and stuff, never a mechanical problem though
@daboss420edi I've never had any problems like that in any Ford....and mopars are also tough, even this little ugly car here...must be GM lol there's a big difference you know.
you hate a srt4 because its a neon... you hate yourself cause you probobly dont have a car and are on dialup
AARbassboss 4 weeks ago
mine was 360hp to the wheels on stock turbo ! but then of course it was the bigger badder Caliber SRT-4 ! got vids on my channel
krazyd1 4 weeks ago
wow 22 pounds of boost and only 306? nice neon bro... Bisimotos civic is over 700 hp... not even 22 lbs of boost, SOHC... 89' Civic, that says alot to me lol. Thank god i drive an Integra... if i had that running 22 lbs of boost (assuiming rods and engine work to support it) im %100 sure id have far over that flimsy 309, theres all motor civic where i live pushing 400... its your money though lol oh well
TheSchmiders 1 month ago
@TheSchmiders Maybe he only did turbo mods....
thechaser1985 1 month ago
@TheSchmiders its a stock turbo dude.
TheSuperAgent47 1 month ago
@TheSchmiders it's on the stock td04 turbo dumb ass. These turbos max out at 300 to the wheels. 22 psi on a big turbo would be 400 to 500hp
2ZZGECelica 4 weeks ago
@2ZZGECelica thank you! lol these people are fucking retarted like how do you not understand that different turbos make different power at the same psi there isnt a set hp for psi.. for example "25 psi doesnt always mean its going to add 200 hp" 25 psi on a gt35r could put out 400 hp persay.. and a stock dsm turbo would be spinning at 25psi but making no more power than if it were spinning at 15 psi lol people are dumb
BudBudSounds 3 weeks ago
@TheSchmiders your a fucking moron.. do you not understand that different turbo's make more power at different psi? theres no set hp mark for a certain psi you fucking noob.. good read up a little bit on forced induction before making a dumbass comment on something like this smfh.. one turbo at 20 psi can make 250hp and a different turbo can make 600hp.. it all matters on the size.. what its designed to run at.. all these factors play into the hp you make with the psi
BudBudSounds 3 weeks ago
@TheSchmiders and good ahead and try and throw a turbo on that civic thats putting down 400 to the wheels naturally aspirated.. the compression is so high that you blow that motor right up with forced induction you would have to completely rebuild that engine to run forced induction
BudBudSounds 3 weeks ago
@BudBudSounds Okay so under $1000 spent on lower cr Pistons and rods, delay the cam gears.... sorrrryyyy there ya go rocket scientist! Holy Crap people...
TheSchmiders 3 weeks ago
@TheSchmiders dude your not getting 400 whp out of an NA civic without MAJOR major major work lol thats like almost tripling the power without forced induction its not easy to do..
BudBudSounds 3 weeks ago
@BudBudSounds I know that, but when youre done building it... theres honestly no better feeling... and Im turboing my Integra (B19c) and that can handle up to 12 psi stock, but im going to get new pistons and rods and run a lower cr ratio. That will only run me like $800. And it already keeps up with the SRT's around here (sadly most people think their stock SRT can take on a lambo.) nobody BUILDS cars anymore these days :(
TheSchmiders 3 weeks ago
22 pounds and just 306?
wrryansf 1 month ago
@wrryansf Yes.. It's probably on the stock turbo. I'm running 21 and mines only like 280 to the wheels? Maybe less.
davido83 1 month ago
So fuckin sweet
Mr2jzge 1 month ago
thats why u put different mopar parts or after stuff i mean it was like cheapest way to go when they came im runnin 600hp on 93 pump
devilwearsprada2100 1 month ago
@devilwearsprada2100 sigh,...i was gonna call b.s. and wave my flag..but i just dont care enough to prove the point..but 600 hp on 93 with mopar bolt-ons?..next your gonna say ur using the stock internals...sigh..
munkymania 1 month ago
@munkymania no motors been rebuilt and im runnin a zeta turbo 1150 injectors and etc
devilwearsprada2100 1 month ago
next time pull the E-Brake and let it smoke!
stanger9410 1 month ago
@stanger9410 lol idiot
drippinblood28 1 month ago 2
Junk
EndLesSsDreaMzZz 1 month ago
Really nice car!, is that at the wheels?
ms3alexander23 1 month ago
Result of letting a Honda guy drive a srt4.
TripleBlackStang1 1 month ago
P.O.S dodge 22psi n only 306HP cmon man thats a joke
kimokamanu87 1 month ago
Are these rims powder coated black or gunmetal?
brianjpharris 1 month ago
You get what you pay for, but good fun for the money as long as you don't like to accelerate and turn at the same time;) SRT 6 of the same year goes for $15-20k and is faster and way better built, try one;) 3 easy bolt-ons put you at very low 12's!
XfireBlake 3 months ago
CHEATER!!! YOU WET YOUR TIRES WITH SOMETHING!!!! lolololol :P
dsmboi91 4 months ago
An srt4 video with no hate or any comments at all! Wow. Give it time I guess. Have 05 srt4. Got love for them. Just tired off all the ignorant hate on them. Nice car keep it up!
AkiraSRT9 4 months ago 2
@AkiraSRT9 Well the truth of it is, the cars are really badly made. My brother has had 2. Really fast, and I'm amazed that it never blew up. The motor never gave us any problems, but everything around it did.
joshuaspinks 4 months ago
@joshuaspinks its a fucking dodge for shit sake.... what do you expect... The whole entire car SRT4 was 1 giant cut corner on dodges part... its a cheap little piece of shit... with a turbo! haha
240sxGuy3 3 months ago
@joshuaspinks like what? cause iv had 2, and a couple of my friends have them too and we've never had any issues besides routine maintenance. its ALWAYS a brother, or friend of a friend's uncles special cousin "that said" there "just bad" without reason or proof. if you knew the slightest bit of how well all the magor components are made on this car made you wouldn't be talking, the srt group doesn't put there name on anything "badly made"
SrtRacerBoy 2 months ago
@joshuaspinks sounds like my SS
mysliwya 2 months ago
@joshuaspinks Really? Guess I got a Wednesday model lol I agree with all you guys tho.. the car gets so much hate, and for the price and what you can do with them its pretty good! I bought mine new in 05 and use it a couple times a year, built it up with goodies but it runs like a champ! only thing that went bad on the car was a stock shaft that snapped in half when I did a really hard full boost launch! (24psi on a 50 trim)
TheAIRTRIX 1 month ago
@joshuaspinks Man, they only break because people treat them like shit.
thechaser1985 1 month ago
@joshuaspinks lol, american cars for ya..... "the motor will never stop working".... yeah that would be nice if the asthetics and creature comforts of american cars didnt fall apart.... we build a mean drivetrain, then go get some McDonalds, and never remember to make the other stuff quality, same with my moms old trail blazer haha windows got stuck and stuff, never a mechanical problem though
daboss420edi 3 weeks ago
@daboss420edi I've never had any problems like that in any Ford....and mopars are also tough, even this little ugly car here...must be GM lol there's a big difference you know.
SirKowalski666 2 weeks ago
@SirKowalski666 ehh yeah, in my experience american cars have had problems with stuff on the inside that doesnt affect the cars driving
daboss420edi 2 weeks ago
@AkiraSRT9 FUCK SRT4S THERE YA GO!
240sxGuy3 3 months ago
@AkiraSRT9 GTIs are better :)
Sorry it had to be done
AmericanStiggy 1 month ago