1992 Toyota Pick-Up Engine Swap & Truck Build

[eyesac99]

1:39, favorite part of doing an engine swap... NOT

[rednecknick413]

what part of MA you guys from?

[95lifted]

What kind of suspension lift? and shackles? Thanks!

[ambroseunc]

How are your cv axles near horizontal? I got my tbar cranked a few inches and the angle is steep, makes me cringe when I put on 4wd

[DSeamonster18]

where did you get that skid plate from the bumper to the axle and what brand is it? i have a 1991 yota and its just blew the head gasket so ill be doing and engine swap soon. truck looks great by the way

[Goteemsaan]

why why why didnt you keep the swampers on ??????

[DISRUPTOR40]

Nice truck

[MangoSmoothie16]

I wonder if the 2uz-fe will fit in there... 

[fuckgota]

waths ingine is..?

[91toyotaoffroader]

one of the best vids on you youtube!

[sklzlm]

That wasn't a 22RE to begin with, It was a V-6. Excellent conversion. What model engine did you drop into it?

[sklzlm]

Nice!!!

[CharlieDoan]

22RE still?

[Motorfordtoyota]

My question is, why would you build up a 3vze? Why not a 3.4 or 4.0 v6?

[yamaharider4ever9]

hey, i have a 1992 toyota sr5 pickup 4x4 and the abs lights are staying on and wont shut off but there isnt anything wrong with it + i checked to see if there is power on the brake fluid level sensor thing and there wasn't. I think there is supposed to be a light for it on the gauges. please help me

[8510Ricardo]

Try it Now In The Mud

[adheeshz]

God dam.. thats a pretty hilux boi..

[1990fordf150custom]

that was a pretty good video

[jordy19892012]

How much money did you put into it after all said and done?

[mic09dcsm09]

Very clean rebuild, very nice

[thisispluto2]

i feel bad, because the first time you get in the mud, say good bye to your beautiful clean and sparkly engine compartment :(

[YodaPala]

shoulda got a 5VZ

[MrMotokx250f]

@YodaPala

Agreed. They both basically have the same lower end, but the heads and all the valve-train of the 5vz-fe are completely different. The 5vz-fe is such a better engine all around... ill never touch a 3vz-e ever again! I did a 5vz swap in my 90' and it really is a world of difference.

[YodaPala]

@MrMotokx250f yea I wasnt trying to be a youtube comment replier dick head, but I seen somebody with one of thease engines and it was just a gutless turd. A lot of people are putting a 4.3 chevy engines in their yota and they are torquey and compact as hell.

[spainobain1234]

@YodaPala HAHAHAH YOU HAVE NO IDEA WhAT YOU ARE TALKING ABOUT.. 4.3 L 's are SLOWWWW. Try Swapping a Toyota Supra 2jzgte into a toyota pickup or 4runner. Hahahah you are funny though, The Chevy vortecs are CRAPPP compared to Toyota engines. look up how fast the Toyota supra engines go. :"2jz gte" 4runner. BAMMMM! Ya now whats up.

[YodaPala]

@spainobain1234

2J engines are too expensive for my taste, You can get a 4.3 for cheap and has good torque is all I'm saying. But I do love Toyotas and have one of my own, 99 4Runner with a 5vz its very tough, reliable and runs great with over 300,000 miles original engine and trans.

I dont want to get in a youtube commet battle. Its for retards and children. Have a nice day

[spainobain1234]

@YodaPala @YodaPala HAHAHAH YOU HAVE NO IDEA WhAT YOU ARE TALKING ABOUT.. 4.3 L 's are SLOWWWW. Try Swapping a Toyota Supra 2jzgte into a toyota pickup or 4runner. Hahahah you are funny though, The Chevy vortecs are CRAPPP compared to Toyota engines. look up how fast the Toyota supra engines go. :"2jz gte" 4runner. BAMMMM! Ya now whats up.

[exanimus99]

i love the 3vze.. never let me down with over 300k km on it

[eca4210]

It's a 3.0 sohc

[kanekumar94]

from what car is this engine from and how many liters

[spainobain1234]

@kanekumar94 tHIS IS THE 3VZ TRUCK TOYOTA V6 3.0 L AND with a turbo you can make them FASSSSTTT. about 400 hp for this motor is really fast

[007ayala]

Nice video and beautiful truck nice work!!!

[96753HAWAII]

hey man what grit did you use on the sandblaster

[19Toyota81]

I give you respect for going through all that work and making that thing a beast! Congrats and hope to see more, bro :D

[clivitch]

Nice engine you got there...I am looking for headers for a 94 v6 toy pick up...Any ideas where I can find'em?

[oaeproductions]

is that the 3.4L that comes in the 4runner?? i like those trd headers?? valve covers?? lol where can u get them?

[Swansen03]

very nice.. but a lot of beautification to a 3-slow powerplant i guess is cool if thats your thing, but yeah.

[nicholastmhsw]

is it a diesel?

[KanaguiGoth]

that guy should put an 1uz to that truck instead :c

[martinmillion1]

REAL NICE PUTTING THE CONVERTER ON THE FLYWHEEL........DAMN IF THAT TRANNY WORKED YOU GOT LUCKY

[MajorRyzman]

sweet truck...

[Scrat335]

Anyone know of a place on the net that shows you how to remove the heads for this engine? My gaskets need replacing and I want to gather as much information as I can before I change them.

[razan8v92]

Cool vid and yoda

[supermotofreak14]

been wanting to rebuild my 3vze. how much dis it cost u? is there any thing i should do or change while im in there

[Demon1987]

did you just put a brand new 3.0 engine? whats up with that trd intake? i figured you would of gone with a 3.4

[MrAutoanything]

dyno!!!!!!!!!!!!

[zerosk8er7]

How much did u spend on that engine swap?

[hondaman338]

ok i got a 91 toyota pickup sr5 automatic 9lucky me huh?) and i was wonderin does anyone know a company that produces a body lift for my truck i cant find a company anywhere?

[ccssk8er123]

hockey pucks and bolts. cant beat it..cheap, durable and any height you want

[otterlakerules]

@ccssk8er123 hahaha that's what my cousin did years and years ago

[IH8Asparagus]

@ccssk8er123 you know, someone like me would actually buy a beat to shit little mazda, buy hockey pucks and lift the shit out of it for kicks.....be careful what you say!!!

[RECKLESSRENEGADES]

or just make some metal spacers

[joesmo505]

@hondaman338 please dont ruin your yota.... body lifts are for pussies. build it right. REMEMBER you get what you pay for

[darkroad6669]

@hondaman338 sky jacker has one for your truck

[19Toyota81]

@hondaman338 just go to lordco or something, and they lift kits there man. or you can do it yourself, meaning you can slide maybe 3 inch solid blocks of solid steel under oron top of the leafsprings, and that will give you a somewhat lift of like 3 inches. make sure you have longer U bolts though, that fassen the leaf springs down

[mic09dcsm09]

@hondaman338 4Crawler.com , performance accessories, and summit racing sells their own brand.

[spainobain1234]

@hondaman338 Hey Shoot me a message if you are still interested in finding that BODY LIFT FOR An AUTO!!!

I have a bunch for 300 Bucks. BOdy LIFTS for auto 92-95 4runners should work in truck as well. Transmission adapter and all.

[spainobain1234]

I AM A HUGE FAN OF YOUR TRUCK , PLEASE CAN YOU PLEASE uPlOAD A VIDEO OF YOU DOING 0-60! THERE ARE NO TOYOTA VIDEOS OF 0-60 and I have watched all the toyota Supra videos soooo. Please let me know if you post a 0-60 vid I need to know how fast your truck is from a stop light or something cause I need to make a decision, turbo the 3vz and put headers, duals etc... OR SWAP A 2jzgte twin turbo 320 hp stock and swap a turbo and all other things for 700 hp on pump gas. WHAT TO DOOO ...

[deputybrad]

There is a way to make the 3.0L V6 last, never owned one but I've heard of guys running them over 250-300K with around 200hp. I know headers for sure make a big difference especially with the head gasket issue. I wouldn't mind a 3.0L but I would for sure fix the head gasket and oil problems before it blew up, not after like everyone seems to.

[TheMotorman8190]

mine is a 93 22re pickup, trust me im a mechanic i research all the time, this morning i found out that toyota is going stop making some models because they are not safe legally. fords and chevy are to expensive for 3rd world countries. did you use you toyota like a real truck or just to drive around town?

[deputybrad]

Like a real truck, out hauling most of the full sizes out there and out lasting them too, all while getting 28mpg. I don't really care to argue, the proof is all over the world, I only see Chevy's in malls with stupid lifts or dragging frames. I am also a Ford guy, but my old Toyota will definitely outlast and out perform my old Ranger. And Fords and Chevy's aren't too expensive when you have private companies and small armies spending around $25000+ for an equipped Toyota Landcruiser/Hilux.

[TheMotorman8190]

thats true, mines had alot of problems so i blamed it on the cheapness of it.

[deputybrad]

That sucks dude. I guess just bad luck? I've beat mine pretty hard on the trails, jumped it and planning on putting a camper on it this summer. Only issue I've had is a blown 3rd in my tranny, clutches wear out on any vehicle, same with shocks. Watch out with the Toyota's (or any vehicle) as the cheaper brand clutches wear out quite a bit faster, it pays to go OEM Aisin or a performance one from Marlin or LCE or something like that.

[TheMotorman8190]

i just blew another head gasket about a month ago, i check the cylinders for worp, and they're worped, now i got to go down to a machine shop have them shave a little off. ill probably have to put in forged pistons and all that good stuff to deal with the higher compression...itll be fun though

[TheMotorman8190]

i have a 93 yota with 279k miles its needed the head resurfaced once and now needs a second and it need a complete rebuild, its had two clutches, all four shocks replaced, the heater doesnt work, the radio stoped also, i can no longer unlock my doors with the key, ive had to replace the exhaust, and all the sensors...i also have a 01 explorer with 249k miles with nothing EVER wrong with it..toyotas are fun but not durable they are made in china just like walmart and are cheap

[deputybrad]

Toyota are made in Japan. Mine has 334K and I just replaced the tranny cause I lost 3rd gear. Toyota's are probably the most durable and reliable trucks out there, plus easy to work on and repair if something does break. You must've had a 3.0L V6 which unfortunately is prone to a few problems but there's a few fixes that could've saved you tons of money if you would've researched. Toyota's are world proven though, I don't see any Ford's or Chevy's in 3rd world countries with 300K+ on them.

[mfuji00001]

200+k miles on it tho 0_o

[DexDizzy]

Man I love toyota..... espically the 22r I hope the tacoma last as long

[mrsmelzbad]

most engines are alum head with iron block, (imports)... 3.o v-6 was bad design...3.4s outstanding,.... 22 R/REs are exc engines, open the exhaust up.... adjust valves... do a good tune-up, they will out -perform a 3.0 with better mileage, want more power? go to Toy performance web-sites... your wallets the limit with the 22R

[sirus06]

we currently have 3.4 liter v6 in our t100 and it has been one of the best Toyota motors we have had as far as mileage goes plus if my facts are correct the 3.0 v6 was aluminum heads and steel block witch had head warping issues. we are currently in the process of an engine swap ourselves from the 3.4 to a Chevy 383 stroker. take a look at our t100 on my channel

[mrsmelzbad]

pull those 3.0 v-6 junkers and put in a 22R,... best engine ever made.... period

[MrSaber152]

no way man the 3rz is better.

[mfuji00001]

really? I've got a 94 with a 22re & it's gutless :(

[2legit89]

whats the v6 pushing stock?

[DISRUPTOR40]

looks nice

[ncsnathan]

I have a 1990. 3.0 v6. I want the 3.4. The 3.0 is shit. I have a warped head on mine. its been sitting in my driveway since june. The end of the school year. I went my entire summer without my yota. My first summer with it, its broken down :(

[soloryderrr]

VERY cool truck and build! Super clean!!!

[iluvaneth]

Hey I have a 94 toyota pick up with the 22re, it runs strong, but need more... what year is the engine you put in and where did you find all the parts to fit your truck

[postopia1992]

do u have independent suspension in the front and whats the name of that lift kit please and thanks

[TOYyota92]

yeah its an IFS and its a 4 inch superlift

[smokovnica]

hey where youlive in mass?i have 94 toyota pickup and i wanna lifted my truck but i dont know if i buy suspencion kit i need buy body lift what you think?

[flucoeagle95]

nice truck

only problem is the gap between the front bumper and grille from the body lift

[joe735]

man thats fuckin sexy for a toyota. These classic toyota truck guys are a different class from the rest of the ricers. They def git r done. lol.

[pedemax]

can I put a 22r in a 92 pickup that had the 3.0 v6 in it?

[christineprovost]

yea but you ave to change all the electronic

[TH3DUBBS]

yes

[hondaman338]

was it an automatic and if it was where did he get the 2" body lift for it i cant find one for my 91 anywhere the make them only for manuels the ones i find

[ccssk8er123]

made it out of hockey pucks and bolts. 2 hockey pucks per body mount. way better than any kit.

[PezoCon]

why didnt you swap the newer 3.4 engine in? it bolts right up to the stock 3vze. the hardest thing to do with the swap is the wiring conversion, and they even make a conversion harness for it so you dont have to mess with it if wiring isnt your thing. I love it though. But yah, for the money you spent, you so should have got a 3.4, the 3.0's are garbage compared to them.

[adge505]

How much did this whole project cost you!? or should i say to rebuild the motor!?

[wasamadafaka]

wooow pretty truck man.! good job

[theysurvivedthewar]

shyster btw 7mg is a straight 6 turbo engine not a V config. ps i agree with get a yota as a 89 pickup owner your truck is beautiful

[GETaYOTA]

beautiful truck!!

[hondaman338]

Hey i have the same truck and was wondering what rims those are im tired of my stock aluminium rims

[shyster93]

what kind of motor is that? 7mgte?

[ccssk8er123]

stock motor rebuilt

[flucoeagle95]

3VZE

[22reTOYOTA]

How do like the DT headers? I have a LC header on my 22re and have no problems.

[zb1984]

Man. That would be a lot of sandblasting.

[flucoeagle95]

thats a great build. i have a 92 as well with 305k miles on it. if you dont mind my asking how much was the engine swap? or all the work for that matter. AWESOME truck and clip...i'd love to see more of this truck

[MetalheadSteven]

Nice truck. I too have a 92 pickup but doesnt quite look like that. lol. 240,000 thousands miles. No A/C shitty sterio system. No major work done exept cooling and braking system. It wont last much longer but after 16 years It is in exellent condinition. I Hope to one to rebuild it back up to a powerful beast. Its rust is sooo bad idk if its possible though. everything is rusting. Engine, frame, body.

[SFreak2008]

do a solid axle conversion then you'll have a crawling beast.

[Jockindabeats]

soo much work. props because thats sick.

i know you said it was your buddies, but you know how much he put into that?

[Jay351]

needs front bumper brackets :) That gap looks a little off. Nice yota!

[Nikebauer05]

Did you do a 3.4L swap?

Killer sound too, is that just from adding the thorley headers

[muddinredneck21]

man i wanna put a v-8 in y 89 yota but don't wich motor would be the best.

[zb1984]

I like that you kept a V6 in it. thank you! haha. Nice truck man, I'm jealous as hell.

[TOYyota92]

that came out good thanks man!!!

[feeIey]

nice. we need to get fireworks

[ccssk8er123]

im down

[TOYyota92]

lets do it right now