Magnet Motor flywheel/generator1

[manassycom]

the power in mine land is suck 4 ours peer day so if i did this will give enough power like 220v 5A ????????????

[wotan237]

so are you getting more power from the large cross spinning than you use to fire the bedini coil, and thus have free energy???

[wotan237]

so, ideally, the small X magnet bars spin and thus turn the larger X, which then creates a voltage that some of which is diverted to power the small X, leaving some left over? yes or no?

[syanivmax]

@eithanyakobi

The plans for free energy magnetic generators

can be found by simply doing the following:

go to Google - search for: "Top magnet generator review"

and click the first one (not the advertisement)

[gabusjr]

Há um erro crasso neste projeto, assim como os outros.

Um motor "perpétuo" não pode dar partida com auxilio de empuxo ou mesmo ser parado com as mãos e permanecer parado...

Você deve buscar o "loop" que faz com que o ciclo seja contínuo. Este é o grande problema dos motores ditos "perpétuos"

[bowlan2112]

use larger magnets

[newton3010]

Id think the best way would be to mount the bike generator directly above the flywheel, as was sugessted to you...this would eliminate having to add parts and you could move on to completing the circut..

[liberatepoverty]

The bicycle dynmo is an alternator, it has a permanent magnet that spins inside the field windings, and the alternate poles of the rotor magnet coupled directly the shaft generates ac voltage and current, because they are used to light up a small 2.2Watt light bulb around 2.5Volts, so does not need dc.

but yes why bother with it when you can generate electricity directly by placing coils in the paths of the spinning magnets on your main rotor. each time they pass magnets you get volt pulse.

[HaroldDPrice]

Just a suggestion... You already have spinning magnets why not put coils in the path of the magnets a generate electricity directly

[SuperMoommy]

put a cap across it to smooth the pulses.gernerators put out dc in pulses that your meter reads as ac

[transfusablepng]

Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!

[giant648]

this is a great test motor its awesome! also there is a very cool magnet motor made by George Green. look up "George Green's magnetic motor" you should find it.

[AClarke2007]

You appear to be impressing yourself with the motions of these machines rather than analysing what is actually happening between the components. Casual observers are not impressed until you can explain step by step, in slow motion, what is actually happening.

[mcorrade]

@AClarke2007 go bother someone else with your self absorbed BS. If you listened, instead of waiting to comment, you would have heard the explanation.

[AClarke2007]

@mcorrade Of course, you`re using a Bedini Coil. It all makes sense to me now. Thanks.

[realitiesupremebeing]

I know the answers for these type of machines because as far as I have noticed, every invention process doesn't have enough muti tasking information all working at once like in my brain to solve these problems, but the government has been attacking me for years because i won't tell them the MISSING ELEMENTS and I never will because they have perminently damaged me and they will never be able to make amends for the damages SO THEY TRY TO STEAL FROM ME BY SURVEILENCE, THEY ARE TOTAL ASSHOLES

[kwdaye]

What kind of torque does it generate?

Cool setup by the way.

[henrykay01]

I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.

H. Tomasz Grzybowski

tel. +48-512-933-540

[giant648]

@henrykay01 i hate to inform you but the u.n. has stuff that would blow anyones mind on the subject "magnetic phenomena" or how you say it "electrodynamic phenomena".

[henrykay01]

@giant648 What do they have?

[giant648]

@henrykay01 they have from anti-gravity to zero gravity machines that run solely on the propolsion of its own magnetics. to other numerous things.

[henrykay01]

@giant648 Strictly speaking there is no antigravity, but reactionless propulsion is possible - I have worked on it. So, who EXACTLY are THEY? How do you know about it?

[Adithep6]

do you use power to rotate it or the magnets turns it.

[WilliamTapley]

you need to hook up a permanent magnet rotor to your apparatus, and make your own generator. It's foolishness to try and generate electricity with that little inefficient bike generator.

[valveman12]

The bike generators are hard to turn. You may want to go with a cpu fan as a generator.

[MrDJEscoBAR]

Very nice idea whit the second wheel on the outside that was my problem until i find the James Roney Stators to shield the magnets pole u dont need ...

Hope it will help u

Keep it up eggselent work :-)

Greets from Germany

[simonspiers]

Those cycle generators require a lot of torque to turn them. As you are up grearing a huge amount, I would doubt if you will have the torque available. You could try a motorcycle single phase alternator used on the early bikes. The Generator is DC and you need to use the case of the Generator and one of the tabs.

Great video.

[1996DNA]

yeah, You may need to measure amount of torque available at the flywheel, and fine a generator or a couple that would require less torgue.? yeah?

[123timooo]

The dynamo generates AC, someone said that befor. But there maybe a Z-Diode in it. Cut that one out because it makes a shortcut if your generatet voltage is bigger than 6-7V (depens on diode).

Q: Is this a free-energy project? Cause your using 12V for rotating the magnet, or is this just at the beginning to start the machine?

[nathan82206]

you kinda sound like johny knoxville

[mcorrade]

ok so is that good or bad??????

[TheB1oodhound]

I don't know if this will help you or not. The "T" and "H" on the bottom of the bike generator stands for tail light and head light. They are both positive. The case of the generator is negative

[8RR8R8]

Attach a heavy flywheel disk to the bike-dynamo so that it has great mass and innertia(momentum). Being a heavy disk, it will start to spin hard but will need only a little push to sustain the movement. Get this heavy dynamo disk receive its movement through a small belt attached to your white wheel (dig a small canal on the periphery of the white wheel to keep the belt into place). An increaced effort for some reason never decreases the amperage- the contrarry.has to do with this radient energy

[mcorrade]

I had the very same thought an even though I've abandon this design I'm work on a couple of other designs with that very idea in mind. However I found something much better than the bike dynamo. I got my hands on a large printer stepper motor and I can generate 12V just by spinning it with my hand and there's nearly no drag.

I have a much bigger and more promising setup comming but it will take many hours to complete. I will take a vid of the progress so far sat

[sypha0x]

Nicely done! Isn't it possible to get copper coils configured with a diode to rectify the current 1 and direction and replace the motor with your own induced version perhaps store your energy via capacitors so the generated current you obtain from your copper coils can power the motor in bursts...also I was thinking of using angular momentum in some type of gyroscope configuration to help thrust past your gates...just food for thought =]

[mcorrade]

thanks and this was just a learning setup to try out several different scenarios and it's since been dismantled. However it is making a come back with a completely different design and a clear plan and design. The larger rotor will act more as a power and flywheel to help rotate to other generator rotors. Keep watching as I'm make good progress.

[ldmorgan222]

Connect the generator gear and the flywheel axle with a short length of hose and two small screw-type hose clamps. Radiator hose, garden hose, vinyl tubing--whatever is a good size will work.Can clamp directly to the flywheel nut and also to the generator gear. This easy "flex connector" will also help position the generator directly above the flywheel axle--then you can just bring a support to the generator and secure it in place with the hose looking nice & straight.

[FuegoBandito]

nnssnnssnnssnnssnnssnnssnnsset­c. and drop it below

[mello67]

The Generator is AC

[utoTinker]

Your Generator was made to run against a moving wheel.

Put some rubber in your Fly Wheel and spring load the generator to an articulated arm and let it do its thing against the flywheel

Be Well

ToTinker

[rustyspings]

To rotate the generator you can put two magnets on its shaft or its gear,let the magnets stick together so you have the north facing out on one side and the south facing out on the other side, if you big rotor is north south north south then as it spins the magnets on the shaft of the generator will spin because the two magnets you stuck on it will flip when the same pole comes past, this will turn your generator with out the need for pullies or gears.

Take Care

Graham

[mcorrade]

Thanks Graham I thought of that but the gain is still to low for it to be productive....

take care

[rudiblackrahmadi]

i do enjoy any video u made. as for the bike's alternator, it produces AC instead of DC.

the biggest problem when u connect it via a belt is the friction. the bike's alternator it self has some annoying drag.

the best solution i can think of is to put the homemade 3phase alternator directly on it... but yes.. it takes more than 2 to tango...

good luck...

[mcorrade]

thanks that's what I thought. Gut why a three phase alternator and not just a home made generator?

[mcorrade]

But (not gut) why a three phase alternator and not just a home made generator?

[rudiblackrahmadi]

3 phase alternator produces more juice than 1 phase/ 2 phase alternator. most 3 phase alternator on the market has iron core which will make a sticky area which reduce the speed.

as for my toy, i'll try to reduce/remove any sticky area that will slow down the rotor.

[dodoshlodo]

i like this concept, interesting to see how you progress

[marthale7]

I have fought this problem as well :( SSG make very poor torque. I tried with 4 coils and the drag to make more energy really hurts you.

You need a bridge rectifier for your generator to a cap. But I do believe the drag will stop you from getting the energy you seek.... to pull out of this. The best I got was with empty coils with rare earth magnets. But much easier ways of getting energy than fighting this way...

[mcorrade]

I agree 100%

[mcorrade]

I've seen and have known for a while that I will need to get a cap for this or any other system I want to work with but I'm not to sure on the size of the cap I should get. I have a ton of old boards that have caps on them and was wondering if any of these are any good. Does the physical size of the cap usually determine the amount of energy it can store?

[marthale7]

Caps need to be handled with care as they can give thier charge off in a hurry. I use 35 4700uf for most of the things I do with bedini.. Congrats on figuring amps :)