why cant you talk fast or normal are u stoned or dumb or puting it on? like yeah man wow its like totally like yeah and i wAs like yeah real like like wat!
My local hobby shop is owned by a couple of RC Pilots who fly competitions world wide and they said to never have a mobile phone near your TX. I has been known to screw the settings up. They also said there's a little lipo battery that helps keep your settings when the other TX batteries are out of charge and need changing. That lipo may have run low if you keep the AA's out between flights. Maybe? My swash type changed without me changing it and that's when I found this stuff out.
Check the swash type. It should be "120° CCPM". It's under the setup menu for the Blade 400 on your DX6i transmitter. If that's not the problem, I'd look under the "Reverse" menu under setup also. That's where you can reverse the way individual servos operate. Handy when some servos operate in reverse to the stock ones. I replaced a rudder servo with a Hitec and found that I needed to reverse the setting on the TX otherwise the heli spun like the Tassie Devil . Ha Ha.
Are you mixing cyclic servo brands i.e elight/hitec? If you are are tow out of three servos go one way and third goes another there really is no way to straighten that out with a ccpm mixed swash. When I upgraded to Hitec's I went into "swah mix" in the 6xi and reversed the values -85 to +85 ect. you can reverse servo channels in the TX too but I went the swash route. Cyclic control is aile/pitch/elev in the reverse menu on the dx6
all same brand servos. wen the guy set it up im pretty sure he used the swash mix. i got some new stuff today including switchs for servo so tommorrow ill start workin on it
why cant you talk fast or normal are u stoned or dumb or puting it on? like yeah man wow its like totally like yeah and i wAs like yeah real like like wat!
azzahighkite1 2 years ago
ohh azza your a mad cunt ayyy faggt
FlyGuyRc 2 years ago
found problem check "video response".
imusbbored76 3 years ago
and your mix should be 60+ ale / 60+ elev / 85+ pitch
kenyas50 3 years ago
swash mix should be 120 ccpm
kenyas50 3 years ago
My local hobby shop is owned by a couple of RC Pilots who fly competitions world wide and they said to never have a mobile phone near your TX. I has been known to screw the settings up. They also said there's a little lipo battery that helps keep your settings when the other TX batteries are out of charge and need changing. That lipo may have run low if you keep the AA's out between flights. Maybe? My swash type changed without me changing it and that's when I found this stuff out.
Waddayreckon 3 years ago
Check the swash type. It should be "120° CCPM". It's under the setup menu for the Blade 400 on your DX6i transmitter. If that's not the problem, I'd look under the "Reverse" menu under setup also. That's where you can reverse the way individual servos operate. Handy when some servos operate in reverse to the stock ones. I replaced a rudder servo with a Hitec and found that I needed to reverse the setting on the TX otherwise the heli spun like the Tassie Devil . Ha Ha.
Waddayreckon 3 years ago
the swash mix says INH dont know wat this means . i will do a vid of it .
imusbbored76 3 years ago
Are you mixing cyclic servo brands i.e elight/hitec? If you are are tow out of three servos go one way and third goes another there really is no way to straighten that out with a ccpm mixed swash. When I upgraded to Hitec's I went into "swah mix" in the 6xi and reversed the values -85 to +85 ect. you can reverse servo channels in the TX too but I went the swash route. Cyclic control is aile/pitch/elev in the reverse menu on the dx6
elministere 3 years ago
all same brand servos. wen the guy set it up im pretty sure he used the swash mix. i got some new stuff today including switchs for servo so tommorrow ill start workin on it
imusbbored76 3 years ago
tx is a transmitter. Your servos are chatting because they are in to tight. He also mentions this in his vids.
JMULIKOW 3 years ago
ths shop sold me a dud servo opened it up and its got stripped teeth.
imusbbored76 3 years ago
thanx, wats tx
imusbbored76 3 years ago
Go to helifreak, and to finless bobs vids. Go to the setup your tx vid...hell explain how to setup your tx..
JMULIKOW 3 years ago