81 yota 22r for sale 2300 obo runs but needs a tune up doesnt have a sway bar more flex like that ... could be a daily drive with a little work .... message me for pics has about 5 inch lift id say has 35s on it need replaced comes with 3 32inch tsl super swampers has a weber carb on it leaks little bit if oil needs the valve cover gasket replaced which is nothing.... has 180xxx on it just minimal surface rust.. no rust on the frame whatsoever...
Thanks! This will be the 8th year of running the truck with no major changes. I was running a flowmaster with a short pipe at the time the video was recorded.
best engine combo for off road in my opinion is the 22re block with the 20 r head more compression nice truck btw better luck next time that hill hole stuff is ruff no matter what any one says check out our 95 t100 on my channel
20r head dosent fit on the 85 and later blocks. deck hights are differant. if u wanna put a 20r head on a 22r block it has to be a 81-84 22r. iv done this mod on my 82 4x4 and the power gains are amazing
You cant beat a yota with a 22r/22re, sure they dont make lots of HP, but they more than make up for it with reliability and durability, I've got an 86 xcab 4wd, if i ever can find a solid front axle, in my area, I'm swapping it over, my engine is already pushing 150 HP with a rejetted Weber 32/36, Offy Intake Manifold,D.U.I. Distributor, Pace Setter Header, Dynomax Muffler, and .30 bore,- its real fast with 16 inch 31's, even with 4:10 gears, I might be better off buying another one
I remember the day I took the video you were mine then and you STILL r!!!!! You out drive your trucks, you know how to put it down the track thats for SURE!!!!!
@mauser8mm192422 i was told you can't kill a g10, the 3 cylinder suzuki engine in a geo metro; well turns out if the timing belt is off a tooth and bends the valves it'll warp the head and loose oil pressure ans seize the engine
that's my luck though, i can kill any engine people say is bulletproof, haven't ran a 22r or 22re yet but with my luck i'm sure it wouldn't last too long, only my 305 in my Sierra has proven itself reliable, 200k and not a thing wrong with it (knock on wood)
hell yea i had an 82 8in lift 38x12.50 tsl's awesome even with a broke ass 250,000 mile 22r it still was eneough to turn em in 4low awesome , on the highway dont go over 45 though
I'll spread the word.
benwill1 3 months ago
81 yota 22r for sale 2300 obo runs but needs a tune up doesnt have a sway bar more flex like that ... could be a daily drive with a little work .... message me for pics has about 5 inch lift id say has 35s on it need replaced comes with 3 32inch tsl super swampers has a weber carb on it leaks little bit if oil needs the valve cover gasket replaced which is nothing.... has 180xxx on it just minimal surface rust.. no rust on the frame whatsoever...
ismoketobacco 3 months ago
god you can wind the fuck out of a 20 and 22r
L4Z3R37H 5 months ago
This has been flagged as spam show
thats how its done hold it in the floor....sweet vid man....yotas are the best
TheScoott1989 1 year ago
thats how its done hold it in the floor....sweet vid man....yotas are the best
TheScoott1989 1 year ago
great souding motor.
313foxbody420 1 year ago
my dad had an 82 toyota with a 22r and it had 11.5 to 1 compression. with an outlaw cam and it sounded kind of like that one.
harleykeers1996 1 year ago
@harleykeers1996. I'm about the same.
benwill1 3 months ago
i gotta get my old 22r built
83yoter 2 years ago
what tires u runnin?
myyota85 2 years ago
@myyota85 ....Those are "Q-78" Buckshot mudders that are around 20 years old. They measure 36/10.50.
benwill1 3 months ago
nice sound
myyota85 2 years ago
Thanks! This will be the 8th year of running the truck with no major changes. I was running a flowmaster with a short pipe at the time the video was recorded.
benwill1 2 years ago
best engine combo for off road in my opinion is the 22re block with the 20 r head more compression nice truck btw better luck next time that hill hole stuff is ruff no matter what any one says check out our 95 t100 on my channel
sirus06 2 years ago
20r head dosent fit on the 85 and later blocks. deck hights are differant. if u wanna put a 20r head on a 22r block it has to be a 81-84 22r. iv done this mod on my 82 4x4 and the power gains are amazing
mugenseikiprospec 2 years ago
man the damn things are foreign but they sure can bog
bigcountrysfordf350 2 years ago
It's got some American parts in it too
benwill1 2 years ago
You cant beat a yota with a 22r/22re, sure they dont make lots of HP, but they more than make up for it with reliability and durability, I've got an 86 xcab 4wd, if i ever can find a solid front axle, in my area, I'm swapping it over, my engine is already pushing 150 HP with a rejetted Weber 32/36, Offy Intake Manifold,D.U.I. Distributor, Pace Setter Header, Dynomax Muffler, and .30 bore,- its real fast with 16 inch 31's, even with 4:10 gears, I might be better off buying another one
undergroundbasement 2 years ago 2
I remember the day I took the video you were mine then and you STILL r!!!!! You out drive your trucks, you know how to put it down the track thats for SURE!!!!!
kilewis71 2 years ago
Saw tinker toy today at the races!! u did purty good!!! (8/22/09)
johndeere330 2 years ago
Thanks!!
benwill1 2 years ago
that 22r looking a little smokey but sounds good at redline +
mauser8mm192422 2 years ago
a at least ya now shes lubed
Fc1wrestler 2 years ago
No more smoke. New set of rings!!
benwill1 2 years ago
nice cant kill these things
mauser8mm192422 2 years ago
@mauser8mm192422 i was told you can't kill a g10, the 3 cylinder suzuki engine in a geo metro; well turns out if the timing belt is off a tooth and bends the valves it'll warp the head and loose oil pressure ans seize the engine
that's my luck though, i can kill any engine people say is bulletproof, haven't ran a 22r or 22re yet but with my luck i'm sure it wouldn't last too long, only my 305 in my Sierra has proven itself reliable, 200k and not a thing wrong with it (knock on wood)
snakesonaplane2 2 years ago
cheap Pacesetter header and 3" flowmaster ending in front of the rear axle. I just extended it to the rear due to rules at another track.
benwill1 2 years ago
This has been flagged as spam show
Check out my 20r22r hyrid build video with information using 99% stock toyota parts
natescraigslist 3 years ago
hell yea i had an 82 8in lift 38x12.50 tsl's awesome even with a broke ass 250,000 mile 22r it still was eneough to turn em in 4low awesome , on the highway dont go over 45 though
kingdickwilly 3 years ago
I like your redlining skills!!!! Great sounding little motor
fastflo1 3 years ago
going on 8 years,still havn't touched the motor. changed plugs once.
benwill1 3 years ago
wow! that's awesome. I definitely looking to buy one of these now
paulfranke 2 years ago
it's hard to kill a yota
vermonster4x4 3 years ago
goes good but u call that a mud pit?
nathanvermillion 3 years ago
lol i see alotta blue smoke comin out of that beast.
neonrider00 3 years ago
she needs some ring...bad. Motor was built 7 years ago with a bad looking block. I built the motor just for one race...and it's still going.
benwill1 3 years ago
because it's a 22r :D
stevensmodrnlife 3 years ago
hell yeah. i got a 22r in my 87 yota and it refuses to die.
ibanezzer81 4 years ago 5
I've got my downshifting down pat...Upshifting, that's another story....
benwill1 4 years ago
ahh, good ol 22R. You could drive that engine like that all day for its whole life and it'll still last ya 250k.
jeepfreak4life76 4 years ago 3
the 22r on my 82 toyota pick up has 512k and still goin strong
Buhundred 4 years ago 7
give me throttle or give me death
jetshull 4 years ago 4
nice work
firelabsdotcom 4 years ago 3