nos gustaría poner tu diseño en nuestro molino ToorWind, creemos que nos puede servir, contacta con nosotros en toorwind@gmail.com , gracias por tu diseño, estamos en contacto.
we would like to put your design in our mill ToorWind, we believe that it can serve us, he contacts us in toorwind@gmail.com, thank you for your design, we are in contact.
I need a suggestion I hooked up my 12V alternator to the battery (120Ah) directly by using a blocking diode & drove the turbine with motor & belt set-up and getting at about 18VDC. But when I connect my Ampere meter in series and noted the DC Amps there were only 1.67 amps going into the battery, while I have seen you video in which you are putting 21 Amps into the battery.
i have 10coils in series (Star Connection) 1.4mm wire & 90 turns each coil. I connected 3 halogen lamp in parallel got 10A
Are these people offering training courses? I might like to learn there if it is not too far from the city. What city/town is this? Are these turbines based on the Hugh Piggot designs or are they a Thai specialty. Thanks.
This has been flagged as spam show
Buenos días,
nos gustaría poner tu diseño en nuestro molino ToorWind, creemos que nos puede servir, contacta con nosotros en toorwind@gmail.com , gracias por tu diseño, estamos en contacto.
---------------------------------------------------------------------------------------------
Good days,
we would like to put your design in our mill ToorWind, we believe that it can serve us, he contacts us in toorwind@gmail.com, thank you for your design, we are in contact.
ToorWind 3 months ago
This has been flagged as spam show
I need a suggestion I hooked up my 12V alternator to the battery (120Ah) directly by using a blocking diode & drove the turbine with motor & belt set-up and getting at about 18VDC. But when I connect my Ampere meter in series and noted the DC Amps there were only 1.67 amps going into the battery, while I have seen you video in which you are putting 21 Amps into the battery.
i have 10coils in series (Star Connection) 1.4mm wire & 90 turns each coil. I connected 3 halogen lamp in parallel got 10A
safdarblog 6 months ago
This has been flagged as spam show
อยากทราบรายละเอียดเกี่ยวกับสินค้าตัวนี้ค่ะ สนใจมาก ไม่ทราบติดต่อตัวแทนยังไงคะ ยังไง เมลล์มานะคะ rachata373@gmail.com
arinaa100 9 months ago
เก่งครับ น้องๆเป็นจุดเริ่มของนักประดิษฐ์ในอนาคตครับ
อย่างน้อยความรู้การสร้างและประกอบ มีคุณค่ากับชีตอย่างมากครับ
code97A 10 months ago
This has been flagged as spam show
ผมขอแสดงความยินดีงานที่ดีมากผมผลิตใบพัดกังหันลมแกนตั้งพีวีซี แต่ไม่ให้เหงือกที่เป็นวัสดุ? วัสดุควรเป็นแม่เหล็ก? หรืออาจอลูมิเนียม? หรือนำไปสู่? ผมจะพูดเรื่องที่พวกเขาทำขอบคุณ ..... , อีเมลของฉันเป็น robertoelizondo2000@hotmail.com
elizondo2000 1 year ago
stators look great,
super guys really super
regards
andy
TheWindMillMan 2 years ago
Are these people offering training courses? I might like to learn there if it is not too far from the city. What city/town is this? Are these turbines based on the Hugh Piggot designs or are they a Thai specialty. Thanks.
KonaChuck22 2 years ago
Hi, very good job, greetings from Bulgaria.
jotovs 3 years ago