doesnt sound anything like a 4 rotor.. how could anyone be decieved into thinking its a quad! too tiny and light, its not like a heavy gargglebrah brah brah
A rotary is completely different from a normal gasoline engine. There are no pistons, connecting rods, etc etc like a normal engine, and hence no "stroke". Go and Google "How a rotary engine works". There's no way I could explain it in 500 characters on YouTube.
what rpm is it running at at the 22 second mark? i got a pp in my rx7 and need to set the idle on it coz it runs at 1000 rpm then stalls. think it needs new spark plugs or tune also coz if i try make it run at around 2200rpm it runs but back fires every few seconds. would old spark plugs do that?
@vlturboman are you running a carb or F/Injection if injection you will need a tune get a air to fuel ratio gauge that will help alot in tuning it and might just be a carb tune needed just do the ignition tune up first check all grounds and does it rev good?
Hi-performance rotaries do share the rough sound of a 2-stroke piston engine during idle and low revs
This is because both engines have an overlapping intake/exhaust cycle. Do not be confused! A 2-stroke utilizes this to reduce either manufacturing/running costs or weight problems, but a racing rotary engine uses it for high power!
The tame, street-driven rotary sounds quiet and steady, but when you hear one that sounds like a 2-stroke, you'd best not challenge it. You will probably lose.
No really, I have committed your phrase to memory. "Suck, Squeeze, Bang, Blow!"
I will add it to my other phrases for explaining things to the engine-impaired, like how the rotating assembly of a rotary engine is "2 Doritos on a stick" as well as any number of comparisons of housing layers to club sandwiches.
Though, admittedly, my food-based analogies are massively trumped by your teacher's play on words haha
But honestly how else would you get a class of 15 and 16 year old male aprentices to remember Intake, Compression, Fire and Exhaust.
Thats teaching at its best. Although I'm still not happy about the half hour i wasted trying to tell the tool shed guy that Rob (the teacher) needed a left handed screwdriver. =P
@Rotard12a fucking right their dude, i have converted so many v8 drivers to rotary just from one drive! another another bonus from going from v8 to rotary is that they go around corners lol
Think of a ported rotary as the perfect child of a 2 stroke engine and a supercharger. They have the same basic compression types that the supercharger does and the ports are like what Rotard12a said and make it like a 2 stroke... kind of.
@naukk1s EVERY rotary sounds a bit like a 2-stroke, since it also fires every revolution of the excentric shaft (and 'cause this is a 2-rotor rotary, it fires 2 times per rev. - just like a 2-cyl. 2-stroke engine) short explanation? a rotor does only 1 revolution while the excentric shaft does 3 ('cause of geometry and gearing), but 'casue there are 3 continously working sides on a rotor it fires every revolution of the shaft - like a 2-stroke...
this your car...im interested in these..been looking online for any problems they had....i found the apex seals dont last long..roughly 60000 km's appearently?...would a 93-97 rx-7 be a deacent daily driver if it was in stock form with maybe upgraded exhaust/intake?...any info would be greatly appreciated
fucking rock that pink man, don't listen to the nay-sayers. Your car can back up that color and then some. I'm going to join you in the full-race rx-7 club by next spring!
i like the way you came out and said it like a mature person,unlike alot of these asshole on hear,not sayin names,who swear they know what the fuck there talking bout...i had a 3 rx7 in my life time while im sure most of them never even own one....
Sounds great. This video is the reason why I love Rotary engines. Awesome looking and sounding car. Sweet Blue/Pink colour combo. Thanks for posting this.
This comment has received too many negative votesshow
you people on here dont know shit and believe all the bull shit they put on here...its a bridge port that makes that sound.and as for your soo called 20b engine never came to the u.s. never will and is illegal...only chance of ever SEEN one or really hearing one is on a race pro race track...plus he got to get rid of that stupd wing on the back and pink has got to go...all blue would be sweet...
actually peripheral ports do make that sound so you fail at rotaries second while yes the 20b is not emissions legal in the US and was never produced in a US based car there are many 20b converted RX7's on the street. if you dont believe me check out petit racings 20b conversion kit for an example.
now thats a fuckin race car id take that ova anyyy v8 i kno exactly wot u mean bout how it sounds beta in person u described it well there wif the vibration and that hahah those things hurt ears, but i love it hehe,, im jelous LOl
bingo we have a winner. seriously people a pair of crappy computer speakers aint gonna give you the exact sound that our car does in real life, nor would they give off the amount of noise and vibrations on the ground. this video just gives you an indication of what it sounds like. ur crappy 15watt speakers aint gonna give you that deep sound it has in real life.
lol i love how so many haters like to crack on the sound of a rotary. simply b/c thats all they can do considering how many v8s get spanked by modded 7's.
The rotary engine can't help what it sounds like. They didn't put some stupid import muffler on it to try to make it sound like something it's not like you and your crappy civics! Great car! I love the wide body kit, and those wheels are even better! Keep up the Wankel Revolution!
Fuckwit. Just you stick to trying to skids in your gay Hilux, then when you get a car actually capable of smoking up decently AND able to go fast, then you can diss rotors.
Sick 7 bro not liking the wing but its a racecar so all good, sounds healthy as, who built the motor? And what carb you using? Keep on Tangin
lol wow kid. my trucks not meant to be fast, notice the lift n big tires. its a trail n show truck moron. this rx sounds like a weedwhacker man, sounds like total shit imo. but then again what rx7 when done up doesnt?
the rx7 is 1 of my favorite jap cars, but they sound like shit compared to anything else almost.
yeah, their are actually two differnt compression strokes as the rotor is going down after the the fire, and then going back up after the exhaust has been set free.
what an idiot. Intake/compression/ignition/exhaust = 4 stroke. It sounds like that because of the way its ported, and also the way rotaries make their power as opposed to a piston engine, using two triangular rotors spinning inside oval (epitrochoid) housings.
Am I correct in that a rotary can be tuned with a file/grinding wheel, just as a 2 stroke can, increasing port duration etc. if this is true, do u need racing rotors/ seals etc?
HAHAHa man that car is gay wtf were you thinking when you bought that you guys won though the gayest car of the year award congrats my snowmaker has more horsepower than that crap
lol give me some that crack you're smoking. it's not bad;1430ish pounds with 355hp naturally aspirated is fine. well i'm sure you were probably kidding anyway.
i'm proud of y'all, you built it right. you kept a rotary in it and didnt swap it to a v8 like most of the other pricks do....great job. look good too minus the big ass wing.
modifying any motor will shorten its life and put it under extra stress. PP is the ultimate porting that can be done to a rotary engine and adds at least an extra 200hp just by making the ports bigger and since this car is only used a few times a year life-span is irrelevant. You really only use PP for race/drag use, they are impractical for the road as drivbility and fuel consumption are very poor, altho some people still do it Lol
Sounds like a grasscutter...
MrXenonboy 1 month ago
this is suposed to sound similar to bridgeport,is the same thing??? ive never heard of a '' peripheralport"
MegaAndroidboy 3 months ago
disgusting sound.
Peanutblood 7 months ago
thats so fucking mean sounding =]
catfisher10100 10 months ago
doesnt sound anything like a 4 rotor.. how could anyone be decieved into thinking its a quad! too tiny and light, its not like a heavy gargglebrah brah brah
sof1map 1 year ago
@SkylarkGSX its like if a monster bridgeport and an extend port fucked and had a baby
BryceI3 1 year ago
i own a 1981 mazda rx7 and i love it even though in has a 13 b in it
srgtrane 1 year ago
This has been flagged as spam show
Check out my pp just posted up on my page
mazdakm75 1 year ago
2 rotors are good but i prefer 4 rotors xD double the powah!
K1ll3rM4st3r 1 year ago
thats Phat
ibeawookie 1 year ago
whaoooo....
ThePikachu420 1 year ago
so bad ass!
bobby21j 1 year ago
people hate what they don't understand...
crap1212 1 year ago
fuck ye 1# sound rotaries 4 life
moowykx250 1 year ago
This comment has received too many negative votes show
did i leave my leaf blower on? oh no, im sorry, its that piece of shit car
tracklife95 1 year ago
what is the stroke number of a rotary. you know like four stroke two stoke???
mojomojo7869 1 year ago
A rotary is completely different from a normal gasoline engine. There are no pistons, connecting rods, etc etc like a normal engine, and hence no "stroke". Go and Google "How a rotary engine works". There's no way I could explain it in 500 characters on YouTube.
Mtrhd0024 1 year ago
fucking mean.
mfuji02 1 year ago
brap brap brap
Stevobob 2 years ago
what rpm is it running at at the 22 second mark? i got a pp in my rx7 and need to set the idle on it coz it runs at 1000 rpm then stalls. think it needs new spark plugs or tune also coz if i try make it run at around 2200rpm it runs but back fires every few seconds. would old spark plugs do that?
vlturboman 2 years ago
@vlturboman are you running a carb or F/Injection if injection you will need a tune get a air to fuel ratio gauge that will help alot in tuning it and might just be a carb tune needed just do the ignition tune up first check all grounds and does it rev good?
rotarycorvette1 2 years ago
vl timing is off. i think.
12valvepower1 2 years ago
@vlturboman
Possibly a shit tune, carb or efi?
FUGGINGMAD 1 year ago
thats a 1937 race car right there
Deechase02 2 years ago
ROFL.
LyonRacing 2 years ago
this car sounds mental
sik1blud 2 years ago
NO, that's exactly how tuned peripheral port rotaries sound. There are many other examples on YouTube you can listen to.
winterstellar 2 years ago
it sounds like its straight ports, without reading the other pages of response I might assume it is.
brenthoser99 2 years ago
huskavana???
oh yeah bmxdildo rotory motors do not have cams bud, just for future reference
lol
fabjonjon 2 years ago
Bro yous are fucking stupid. Turbohead25 said his car sounds like a rota but its a piston engine. so either his motor is bad or he has a lumpy cam.
bmxdildo 2 years ago
Is that a daytona body kit?
mee198205 2 years ago
sounds exactly like a lawnmower
unitedclean04 2 years ago
Wow u must have an excellent lawnmower!!
mee198205 2 years ago
lmao my friends car sounds like that but its not rotary..i told him to get it checked out
Turbohead25 2 years ago
hahaha lolz ur comment made my day ....dats friggin hilarious
bridgeportedrotary 2 years ago
lumpy cam maybe?
bmxdildo 2 years ago
HHAHAHHAHHAHAHAHAHAHHAHA, thats hilarious you posted on something you know f/a about.
brenthoser99 2 years ago
And you.... your an idiot. TRY and figure out why i said what i said before you comment.
bmxdildo 2 years ago
i wanna see this run.
PrescriptionSeven 2 years ago
Did this car used to run a 400 chev?.
vortonovic 2 years ago
Awesome engine. I want to install a bridge ported 13B in my Datsun 710. Any advise is appreciated.
jaimecidcampeador 2 years ago
dont go any further than bridgeporting, otherwise you'll run out of money at the petrol station
ducatiracing 2 years ago 4
Kep the L18
mikkars250 2 years ago
it sounds like it's shitting out a cow
Anti298 2 years ago
its a series 3 not a fc
sammystreet 2 years ago
I genuinely like the looks of the your FC. A real race car :P Love the sound aswell.
lasse77777 2 years ago
sounds like 2stroke!!!
naukk1s 2 years ago 7
Hi-performance rotaries do share the rough sound of a 2-stroke piston engine during idle and low revs
This is because both engines have an overlapping intake/exhaust cycle. Do not be confused! A 2-stroke utilizes this to reduce either manufacturing/running costs or weight problems, but a racing rotary engine uses it for high power!
The tame, street-driven rotary sounds quiet and steady, but when you hear one that sounds like a 2-stroke, you'd best not challenge it. You will probably lose.
Rotard12a 2 years ago 33
Two strokes generate uber power as well, take a look at the old 2 stroke motorcycles
250cc Two Strokes took on 400cc 4 strokes in motoGP
GarageBoy 2 years ago 2
Ummm... No.
But I believe they ran 250cc strokers with 400cc 4 strokes (coloquialy know as "deisels amonst the 2 stroke runners) In a domesticc series in the UK.
mikkars250 2 years ago
Thanks for that mate.
I always thought rotaries shared the same cycle as a four stroke motor.
Suck Squeze Bang Blow, my teacher would say.
Lol,
Thanks for the info mate. =)
vspec2wrx 2 years ago
ROFL! Never heard that one, but I'm gonna use it haha I'd like to meet your teacher =P
Rotard12a 2 years ago
Trust me you don't. =P
vspec2wrx 2 years ago
No really, I have committed your phrase to memory. "Suck, Squeeze, Bang, Blow!"
I will add it to my other phrases for explaining things to the engine-impaired, like how the rotating assembly of a rotary engine is "2 Doritos on a stick" as well as any number of comparisons of housing layers to club sandwiches.
Though, admittedly, my food-based analogies are massively trumped by your teacher's play on words haha
Rotard12a 2 years ago
ROFL! Two doritos on a stick =P.
But honestly how else would you get a class of 15 and 16 year old male aprentices to remember Intake, Compression, Fire and Exhaust.
Thats teaching at its best. Although I'm still not happy about the half hour i wasted trying to tell the tool shed guy that Rob (the teacher) needed a left handed screwdriver. =P
vspec2wrx 2 years ago
If you go to the right hardware store you can get some used paint.
It's in the shape of a house.
blyndrotor 2 years ago
Hahahahaha!
Took a while to work that one out lol. =P
vspec2wrx 2 years ago
My teachers at LTI used to say that.
bchin86 2 years ago
lol, thats for jets!
CmdrTobs 2 years ago
@Rotard12a fucking right their dude, i have converted so many v8 drivers to rotary just from one drive! another another bonus from going from v8 to rotary is that they go around corners lol
rollzon20z 1 year ago
Depends on if it can get traction or not...
SarraPiyopiyo 8 months ago
This has been flagged as spam show
Depends on if it can get traction or not...
SarraPiyopiyo 8 months ago
@naukk1s
Think of a ported rotary as the perfect child of a 2 stroke engine and a supercharger. They have the same basic compression types that the supercharger does and the ports are like what Rotard12a said and make it like a 2 stroke... kind of.
Teslafan12 1 year ago
@naukk1s EVERY rotary sounds a bit like a 2-stroke, since it also fires every revolution of the excentric shaft (and 'cause this is a 2-rotor rotary, it fires 2 times per rev. - just like a 2-cyl. 2-stroke engine) short explanation? a rotor does only 1 revolution while the excentric shaft does 3 ('cause of geometry and gearing), but 'casue there are 3 continously working sides on a rotor it fires every revolution of the shaft - like a 2-stroke...
purpleGoAhead 1 year ago
because its a rotang !
cleathyjr 3 years ago
This has been flagged as spam show
what is the point of this stupid vid?
nuggetman98 3 years ago
To piss you off
noob5000000 3 years ago 4
lolz
bridgeportedrotary 2 years ago
what is the point of you existing?
FaytTang 3 years ago 12
Tough as fuck!
nismopwr 3 years ago
lolol sounds like a coffee grinder but still mean as hell
supajakepanda 3 years ago
sounds mean..12a or 13b??
XCLUSIVINC 3 years ago
this car is savanna right...ni kreta buruk bodoh punya driver..mau mati awal ka buat begitu laju..
nazleeya12 3 years ago
english mother fucker, do you speak it?
slimeball6969 3 years ago 5
obviously not
noob5000000 3 years ago
youtube is world wide ass.
iamxeddiex 2 years ago
this mazda rx7...he use engine 4rottary.
nazleeya12 3 years ago
yes, this rx7 ... no use engine 2rottary.
FaytTang 3 years ago 20
shit looks awesome! sounds angry, i love it
VIPKINGsStalker 3 years ago
oo shit look out its going to take off wit that shit wing on the back.
rey0176 3 years ago
but that car is actually fast and needs down force in the rear since it actually is rear wheel drive.
Truenofan 3 years ago 3
thanks for the info:)
jeremysavard666 3 years ago
this your car...im interested in these..been looking online for any problems they had....i found the apex seals dont last long..roughly 60000 km's appearently?...would a 93-97 rx-7 be a deacent daily driver if it was in stock form with maybe upgraded exhaust/intake?...any info would be greatly appreciated
jeremysavard666 3 years ago
My rx7's engine had a rebuild 10 years ago and has done about 100,000 - 150,000km and the engine is still going strong.
abominableaussieman 3 years ago 3
sounds sick
jeremysavard666 3 years ago 2
is this a 4 rotor engine?
jeremysavard666 3 years ago
lol, i'm pretty sure it's just peripheral port.
zoomzoomrotary 3 years ago
i wish. 2 rotor mate.
FaytTang 3 years ago 5
@jeremysavard666 no its 2 rotor. all peripheril ported rotarys sound like this
conutach 4 months ago
nice =)
340aarcuda 3 years ago
thats a scooter maaan ;)
0bn0xi0uz 3 years ago
2stroke on steroids!
karl295 3 years ago
sounds damn good......full lenth exhuast pipe(wouldnt you get more power if you used a longtube hedder?)
mudpuppy4life 3 years ago
LOL sounds like my moped!
granbar2 3 years ago
haha tomos power
rollemdoobies12 3 years ago
This comment has received too many negative votes show
wow dude,, ditch ths shoping cart spoiler
sirpillow69 3 years ago
its for downforce and handling, not looks. Its a race car, not a show car....
abominableaussieman 3 years ago 2
sound sick freakin nice man
bridgeportedrotary 3 years ago
fucking rock that pink man, don't listen to the nay-sayers. Your car can back up that color and then some. I'm going to join you in the full-race rx-7 club by next spring!
bikerbob951 3 years ago
i like the way you came out and said it like a mature person,unlike alot of these asshole on hear,not sayin names,who swear they know what the fuck there talking bout...i had a 3 rx7 in my life time while im sure most of them never even own one....
rey0176 3 years ago
Sounds great. This video is the reason why I love Rotary engines. Awesome looking and sounding car. Sweet Blue/Pink colour combo. Thanks for posting this.
Rotaryfatboy 3 years ago 3
This comment has received too many negative votes show
you people on here dont know shit and believe all the bull shit they put on here...its a bridge port that makes that sound.and as for your soo called 20b engine never came to the u.s. never will and is illegal...only chance of ever SEEN one or really hearing one is on a race pro race track...plus he got to get rid of that stupd wing on the back and pink has got to go...all blue would be sweet...
rey0176 3 years ago
actually peripheral ports do make that sound so you fail at rotaries second while yes the 20b is not emissions legal in the US and was never produced in a US based car there are many 20b converted RX7's on the street. if you dont believe me check out petit racings 20b conversion kit for an example.
G8KeaPoR 3 years ago 2
it does sound MINTTTT
jigled3o2 3 years ago 2
soundz frikennnn mintttttttt
rx13be 3 years ago
how come mazda rotartys sound like this on idle, is it to do with 13b and 20b
ascoughc 3 years ago
It's to do with the porting done on the engine plates..
rotaboynz 3 years ago 3
Nice ride, I love rotaries, like a 2 stroke on steroids. I wish I still had my mint gsl-se.
everelusive 3 years ago 2
this is why im addicted to rotaries.
the slow controlled idles of a peripheral port 2 rotor, then the high pitched growl during revving. (for this car that is)
nice job and keep up the good work. hope this car wins a few :) cheers.
dorifto91 3 years ago 2
I'm diggin the blue/pink color combo, reminds me of old school RE Amemiya.
dnuofntsol 3 years ago 5
well done to you mate... not my cup of tea... but what ever floats ya boat!
90DVL 4 years ago 4
music to my ears man keep up the nice work oh and do you know where i can find an old RX-7 so i can fix it up?
superdude361 4 years ago
Where do you live? I have one for sale. 1982 GSL. Doesn't run but hey, it did when I parked it.
TKDWolf 3 years ago 3
now thats a fuckin race car id take that ova anyyy v8 i kno exactly wot u mean bout how it sounds beta in person u described it well there wif the vibration and that hahah those things hurt ears, but i love it hehe,, im jelous LOl
PHDMuZzA 4 years ago
ahhhh music to the ears!!!
Gold
seriavo 4 years ago 2
any vids of it going around the track?
CasualA 4 years ago
vid is now on my channel cheers
FaytTang 4 years ago
lol it sounds like a weed-whacker but its still cool, i bet it sounds a bit better in person
Superdude688 4 years ago
bingo we have a winner. seriously people a pair of crappy computer speakers aint gonna give you the exact sound that our car does in real life, nor would they give off the amount of noise and vibrations on the ground. this video just gives you an indication of what it sounds like. ur crappy 15watt speakers aint gonna give you that deep sound it has in real life.
FaytTang 4 years ago
almost brought a tear to my eye, sounds farrkn phat!!
rexxxy81 4 years ago
lol i love how so many haters like to crack on the sound of a rotary. simply b/c thats all they can do considering how many v8s get spanked by modded 7's.
charlielover18 4 years ago 3
they sound like shit to the rest of the jap cars because it is a good car and because it has a unique engine...just like boxer engines in subarus
krikorian1 4 years ago
bridged the ports 4 sure there
Gummby69 4 years ago
po po po po po pop po po po pop
AdemJashari56 4 years ago
how much fucking oil do i out in a 12a rotary??
jonsatwalmart 4 years ago
piece of shit or your car?
slave2thesystem 4 years ago
sounds great!
kyleracescars 4 years ago 2
riiighht carcasm?
AdemJashari56 4 years ago
No, people with taste and who respect poeples work.
Ill car, love the music.
COREYHELLO 4 years ago
damn that must be fast
loottus1 4 years ago
That thing sounds MINT! Nice car!
MommysLittleMonster7 4 years ago
The rotary engine can't help what it sounds like. They didn't put some stupid import muffler on it to try to make it sound like something it's not like you and your crappy civics! Great car! I love the wide body kit, and those wheels are even better! Keep up the Wankel Revolution!
mrwankel82 4 years ago 2
love roray engines,but i hate that sound
HitMan1263 4 years ago
just remember guys if you havent got decent speakers with your computer of course the car is gonna sound shit, cos ur speakers are shit.
FaytTang 4 years ago
this is a joke... right?
it sounds like my weedwhacker
theoptimist333 4 years ago
Fuckwit. Just you stick to trying to skids in your gay Hilux, then when you get a car actually capable of smoking up decently AND able to go fast, then you can diss rotors.
Sick 7 bro not liking the wing but its a racecar so all good, sounds healthy as, who built the motor? And what carb you using? Keep on Tangin
ScotchRB30DET 4 years ago
lol wow kid. my trucks not meant to be fast, notice the lift n big tires. its a trail n show truck moron. this rx sounds like a weedwhacker man, sounds like total shit imo. but then again what rx7 when done up doesnt?
the rx7 is 1 of my favorite jap cars, but they sound like shit compared to anything else almost.
theoptimist333 4 years ago
They sound pretty good at 10k rpm.
Aor87 4 years ago
Gotta love the sweet sound of a rotary..
matnes87 4 years ago
souds like a realy stupid small bluffing engine, but rotart = :D
calmatosport 4 years ago
yeah, their are actually two differnt compression strokes as the rotor is going down after the the fire, and then going back up after the exhaust has been set free.
rotaryoutlaw 4 years ago
sounds mean but you fukkkkkken morons below shut the fukkk up stroke each dik so it can becom 5-stroke
teamcityimage 4 years ago
Because it works on the 4stroke pincipal:
Intake -> compression -> ignition -> exhaust
Viertakt 4 years ago
its a 2 stroke
bundibull 4 years ago
No, it is a 4stroke. A rotary 4 stroke, that gives it that cool sound.
Viertakt 4 years ago
what an idiot. Intake/compression/ignition/exhaust = 4 stroke. It sounds like that because of the way its ported, and also the way rotaries make their power as opposed to a piston engine, using two triangular rotors spinning inside oval (epitrochoid) housings.
ScotchRB30DET 4 years ago 2
yea... i love driving by leafblowers and gas weed eaters and hitting 8grand... the guys working look funny at u.
insipidtomato 4 years ago
Am I correct in that a rotary can be tuned with a file/grinding wheel, just as a 2 stroke can, increasing port duration etc. if this is true, do u need racing rotors/ seals etc?
tpvalley 4 years ago
You can open the ports up, i.e. make them bigger for more power, by grinding away.. if that makes sense!!
robedwards99 4 years ago
Sounds just like a 2-stroke leafblower engine.
toothlessBrad 4 years ago
it's a two stroke all right. lulz.
TKDWolf 4 years ago
Nice seven kinda rice tho wit the big ass wing but love the sound and 1st gens are the best.
ROTORY POWER!!!!!
RxDrFtr84 4 years ago
HAHAHa man that car is gay wtf were you thinking when you bought that you guys won though the gayest car of the year award congrats my snowmaker has more horsepower than that crap
SingleTurboRx 4 years ago
lol give me some that crack you're smoking. it's not bad;1430ish pounds with 355hp naturally aspirated is fine. well i'm sure you were probably kidding anyway.
diejondie 4 years ago
i'm proud of y'all, you built it right. you kept a rotary in it and didnt swap it to a v8 like most of the other pricks do....great job. look good too minus the big ass wing.
hotmazda14 4 years ago
awsome
vipergts333 4 years ago
hey there i finally got some vid on here , awesome car , would like to see it run , when in october ?
i might fly down to say hi to your dad again ...
rxi11 4 years ago
best sound ever
that rota is angry :)
re20bt 4 years ago
beautiful sounds m8 good job on the car... my rotarys somewhere in heaven lol i sorta blew the heads owell n e ways nice car
TynanMaaka 4 years ago
Holy crap thats light! You got any clips for when its in action?
driftingcorollas 4 years ago
the ports are as big as you can get them, induction is just a big 51 ida weber carby
FaytTang 4 years ago
Sounds great! What sized ports are you running and what induction?
bizzopp 4 years ago
modifying any motor will shorten its life and put it under extra stress. PP is the ultimate porting that can be done to a rotary engine and adds at least an extra 200hp just by making the ports bigger and since this car is only used a few times a year life-span is irrelevant. You really only use PP for race/drag use, they are impractical for the road as drivbility and fuel consumption are very poor, altho some people still do it Lol
FaytTang 4 years ago
Dose it shorten a rotarys life to PP it? Someone told me it put's the motor under extra stress.
x90drift 4 years ago
Sounds so obnoxious! I f-in love it!
VonVoltage 4 years ago
good music
infectrus 4 years ago
holy shit that couldn't sound any better!!! :D just awesome!
h4inf 4 years ago
whats the power?
grifferuud 4 years ago
Sounds and Looks great!
SlotShop 4 years ago