flux core

[ShadysEyes]

i want an instructor like him

[calopolus]

It's za me, a Mario!

[freedomfries333]

You WILL have FUN WHILE WELDING!!

[guitargluv]

i love how the description says weld lol

[LaRobertos]

now weld it you fucker our ill kick your ass

[ez112442]

That is badass mustachio you have there, sir.

[theman4130]

I love FluxCore!!! Fun to weld with!!!

[rdwafer75]

So that's what Stormtroopers look like with their helmets off!

[rdwafer75]

Damn the Chuck Norris of Welding!

[Jaket2000]

For a bend test he just stares it down.

[JohnMcArthey]

If you think it well,a welder is a lethal artifact:it generates energy more than necessary to make you a toast,and the wire tip deliver greats amounts of heat in a small surface:touch the wire when hot and the injury will be like a little "lightsaber hole"

[JohnMcArthey]

six persons hava been burned by a lap joint...over the head

[lachasse]

This guy has a lot of knowledge and worked like hell on those illustrations. He speaks well and the video is very professional.... and he has the passion to go the trouble of showing it you...

I want to learn to weld, and this is the guy I respect the most here.

Double thumbs up!

Thanks



[Mp57navy]

Elgacore MX100 all teh way.

[nickwheels2008]

i subscribed

[hattrick364]

looks like 6 people couldn't figure it out

[sloczu87]

dzięki za wskazówki, nagraj teraz polską wersję:)

[Alientraveler003]

Yes yes mey friend ! I like that direct info in this vid ill listen to this guy all day

[theweirdthings]

Chuck Norris of welding is present in this video.

[Rattletrap2]

Steve Bleile is an awesome welder and awesome Instructor! The man makes a complete video collection of all the different "How To" welding videos showing each type of welding. They sell for $25 to $30 at Northern Tool in the US and also at Princess Auto here in Canada. The video of the arc shots is better than any of the higher priced videos out there that I have seen.

Anyone "slagging" this guy does not know anything about welding!

[burrito1331]

we watch this guy in my welding class

[wildfire8509]

i think he sat on a wielding stick

[594bolt]

The Chuck Norris of welding!

[smallsaves]

At welding school, the whole class goes crazy when they show his films on welding!

[gar5952010]

good video and flux core tips 

[AngelOfRetribution91]

Welder Steve, I remember watching these when I was in High School.

[sall2014]

nice demonstration...good instructor...thanks

[simpleinseattle]

I suspect this guy has asked "Who wants a mustache ride" a few times in his life.....

[TheCrytX]

he called it gun

[burningsociety]

damn weld guy.. you scary

[welder4life11]

This guy welds like a friggin' machine!!! WTF!!! Kinda has a face like, "now, listen here, you little son of a bitch"...

[welder4life11]

This guy welds like a friggin' machine!!! WTF!!!

[shawnwright111]

this guys number one! make more welding videos and shit i might even grow a mustache like you. fuck yeah !!! love the video.

[TheWelderman1962]

he looks like an x-prison welder hiding from his parole officer with that stash!!!!!

[richiewil69]

wuts with the 70s porn stash lmao

[Piklethedoodad]

I wish my welds were that straight.

[jav818]

Is it me or this guy looks like Charlie Sheen?

[gymkhanadog]

@INDIANGURU69 Did writing that make you feel good inside? Did saying "Nigger" and "Cock" make you all tingly and warm? Was it really necessary to post this type of comment on a useful video?

[lovebunny628]

I dont know if you are still on but thank you for this video.. I need help controling worms... More like snakes...

[mdinc20]

I bet he would make a great high school welding teacher until you pissed him off

[MrMarreBarr]

Good video!

[MrAluminox]

That's old fashion. Straight and simple. When the chief with a lot of eagles' feathers on the head  talks, papooses have to listen to...The video is very instructive.

[DIJV79]

Drag technique.

[HomeSickForEternity]

He only blinks twice, and I swear it's just to add emphasis to the words "structural " and "fabrication."

[makedoandmend2]

good welding diagrams

[czf21]

That is the same video that I saw at college and uti Hahaha

[GrumpyMcBowel]

Wow, I was scared to give this video a thumbs down.

[transamman305]

Modern instructional vids are so pussyish compared to this. This guy is the true definition of a BAMF. Straight to the point and keeps it simple.....and that god damn mustache just keeps you focused on him and what he has to say. You listen, you learn. You don't listen, he roundhouse kicks your face in!

[manfuckyou562]

this guy could brush slag with that stache

[b18c5integra]

what a stupid looking mustache.

[01Commenter10]

He reads well… haha

[tdennison22]

Why isn't this guy coaching the Steelers?

[Choncer]

Great starter advice. If i could add anything, it would be about starting your puddle, and maybe make mention of stick.

[RKTologist]

you listen here buddy

[TheInfotwins]

thanks jeff foxworthy

[avilam2006]

we watch this guys videos in my metal shop class at school haha

[NavyBlueSTL]

Great info in a concise video. I'll put these into practice. Thanks Keith Hernandez ;-}

[imautuber444]

Nice video, its inspired me to grow a moustache.

[Andy205ro]

only one good video

[g0d77]

Great job explaining the different welding techniques. Very easy to follow and understand.

[x1zz1x]

nice tut

[yumyumsashimi]

Looks like Charlie Sheen off drugs and with a crotch duster.

[mattmagbanua7]

the guy who disliked this doesn't know how to weld

[sanaya209]

this guy is the fuckin ruler.

[pyroman675]

i now know my my weld was a little to flat, have to keep it at more of an angle

[ninja6kid]

this is so awesome...

[SlayanicDoom]

Its steve blyle!

[cobenblack]

porn tash

[Bikeman1087]

Thanks basis1305(steve?) for making this video. I believe I'm gonna learn about welding, I'm planning to buy an inexpensive flux core welding machine, decastar 130amp or biltema 130 amp flux core. I dont need professional welding machine so I wont buy kemppi or esab.

[rogelio67]

cool mustachio

[hanghoodiescum]

that guy looks like he would jump over the table and weld your ass up

[johnPiercey]

@hanghoodiescum : is there an echo in the room?

[inasingtr]

@hanghoodiescum if only you're a tight ass.....hehehehehe

[VinnWi]

@hanghoodiescum Mustache

[rckldoit123]

Is that a fake nose and stash ?

[burlymugg]

this guy is like the king of stepdads

[MASSEY4201]

he's Steve and he's a welder

[rickettystreet]

Very well done. Thank you

[sjjdiienno1]

i would not want to piss this guy off...he looks like he wants to kick ass

[TheBluethunder3320]

great video!

[sutano32]

i like this explication 1-10 i give 9.5

[sutano32]

i like this explication 1-10 i give 9.5

[GeorgiaBoi70]

Great video......and I've never seen such a gorgeous mustache.

[TurbulentG]

so flux core is MIG/MAG ????

[megawelderguy]

@TurbulentG Its similar. Same wire feed. Mig has solid wire , Flux core is hollow , filled with Flux. Generally its a bad looking weld as compared to Mig. Oh Mi must have a sheilding gas. Flux core does not . Also Mig requires an articulation of the torch wile welding.Flux core doesnt .

[TurbulentG]

@megawelderguy thats so wierd im a fabricator in germany and i have never heard of flux core

[jacktheripped]

@TurbulentG so common here you can find it in hardware stores, you don't have to go to a welding store to find it. Last 10 pound spool I got was $44 at a Lowe's.

[megawelderguy]

@megawelderguy It is used for outside( windy conditions) I think it was invented in America . Im not sure.

[pilotmountain1]

@TurbulentG MIG/MAG refers to inert gas or active gas welding using solid wire electrodes ie. GMAW, Fuxcore or FCAW is just that, flux cored inside the wire which can be used with or without shielding gas depending on the application.

Hope that helped?

[TurbulentG]

@pilotmountain1 yeah thanks in a way but im still confused about the protective gas so it has flux inside the wire are we talking about flux as in fluid dynamics Physics im really confused ive never heard or seen flux core before i even asked my bosses and they couldent believe it either were in germany by the way

[pomonabill220]

WONDERFUL moustache!!!!  would LOVE to see him in a tight tee shirt!

[markamunoz65]

@pomonabill220 ...and singing :MACHO, MACHO ,MACHO MAN......  LOL

[xide3]

omg i want that guy mustache its awsome

[JCVDFan1]

The guy has that "you wanna run that by me one more time asshole?" look on him lol lol

[DougPlucker]

That is Steve Bleile, an ASME certified welder with over 25 years of experience and current owner/operator of a custom fabrication shop. Having taught many people how to weld, both on the job and as a part-time instructor, Steve understands exactly what information viewers need to get started and improve their skills.

[vochitoken]

Wow mi head hurts it means that I learnt something...

[KillaConnect91]

Im new to welding and i bought a flux core. Im wondering if i will get electricuted if my bare skin touches the metal while im welding. What i mean is since a current is going through the metal from those prongs u need to attach to the metal, will this cause any harm if i hold the metal in place while im trying to weld it?

[breezebro]

@KillaConnect91 NO! The voltage is too low. The only electricity you have to worry about on a welder is the same as any electrical device. The case of the welder not being grounded correctly just like any power tool is what would shock you. The ground cable and wire cable coming from the welder are safe to touch if the welder is grounded properly at the 110v or 220v supply.

[elliotmotoX]

he looks ready to smack somebody up

[jwilson811]

I didn't know Keith Hernandez could weld lol

[Tab54o]

WELDING IS SERIOUS SHIT BROTHER DO IT RIGHT OR GET THE FUCK OUT!!!!! Is pretty much his message.

[RAKUFIRE1]

Just in case you didn't think he could weld, he's wearing half his outfit. No leather jacket. Dude your not gonna get any candy on Halloween, with only half your costume or the porn star mustache.

[bolhi666]

Dont fuck with this guy.

This is brother of Chuck Norris

[metinoheat]

Totally ready to kick some ass! I think most of the good people here would agree with me.

[BPwhistleblower]

His left arm is fake ! he is really holding a gun under the table !

[gotboost15psi]

haha this guys ready to kick some ass!!

[flippermac]

His mustache rocks!!

[MrJoseph1157]

Good vid,lots of info in a short ammount of time,very good.

[numadelacretaz]

please don't make stupid comments!! this man explane very well and right thing!

[Patthesoundguy]

Love it

[MsFarmhand]

That guy looks like hes about to come over that table and kick some ass.

[worldtravel101]

@MsFarmhand im afraid if my weld isnt good enough, he might shove my face into it hahaha

[matt921]

@MsFarmhand its just the mustache hahahahaha

[CaseIH232]

@MsFarmhand hahaha

[r34skylinegtrbhp]

@MsFarmhand

It's the moustache

[KCobain95]

@MsFarmhand his name is steve

[MistaMarshMellow]

*massive ejaculation*

[sricketts282b]

Look how clean his gloves are?

[yamster88]

hes gotta look fresh for his video debut

[sricketts282b]

I wander if this guy has ever ran a bead?

[ojsdaddy]

@sricketts282b I wonder if you ever passed 3rd grade. He obviously knows what he's talking about from experience and explains his points clearly and well.

[sricketts282b]

ojsdaddy, the only experience this guy has is reading que cards. Watch his eyes, anyone can sound like they know what they are talking about when they are reading off the information. Even a third grader would know this.

[redbackeagle]

very nice sir!

[megadethjames]

whooo fuck yea its the mustach man thats what our teacher calls him. this dude is awesome lol

[orangesharpy]

This guy is like a 80's tv show action hero. He speaks and you listen. The Chuck Norris of welding. His mustache has more strength than most mens entire bodies. Just awesome.

[LittleRedF150]

@orangesharpy good one

[kura2707]

hi sr great video i need know,the speed and voltaje or apms.for a 3 g test,on 1/2 inch or 31/4 plate steeal thanks

[Jimmyjewels]

I Love This Guy!!!!!!

[gownozjad3]

great video! i hawe question : when i want deep weld and deep penetration i should "push" or "pull"??I gues pull,Im right??

[lovestopsfear]

great video. much more informational than mine!

[steeltears]

Nice teaching video!