Added: 10 months ago
From: nutnfancy
Views: 72,141
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (420)

Sign In or Sign Up now to post a comment!
  • bit slow on shooting that second target

  • I used a glock 22 in the academy and it jammed, all guns are liable to jam at any given time. The only thing I don't like is when the digg 1911 did this nutnfancy was ready to send it to the manufacture because of one magazine failure.

  • Just as other people have said, if you're using the extra length of the mag for the use of your grip, of course the gun is going to jam. It's the same with many pinky extensions because it forces the mag further forward which is not going to sit right during the rounds entering the chamber. I've fired compact and fullsize mags out of subcompact guns and never had a problem. I guarantee it's human error. There's no difference between a G17 and a G26 mag other than the length

  • Just tell the truth it was the gun not the mags!!! Glock lovers hate to admit when glocks fail. I would give that test an F.

  • @sigmaoverglocks I'd give you an F, kind sir.

  • By any chance did you drop the slide before the mag was seated all the way?

  • Did I hear a ricochet from the last shot at 4:51?

  • if you use the extended mag as a grip extension and apply pressure on the clip with your pinky that will cause the failure to feed

  • I've had Glocks 17 & 21 do this to me, slamming the magazine in the well hard and the slide releases never caused a jam just went into battery right away

  • Doors are meant to be closed firmly, not slammed---same goes with magazines. Run the exercise again without the unnecessary "slamming" of the mags--bet'ch next months pay it'll run 100%. YOU are inducing an error; with enough effort, I can make anything fail. Likely, since the heel of the ext mags have nothing to hit against to stop over-travel, they're extending up into the chamber area too far.

  • awesome vids!!

  • another possible reason for the jam is when you put in the larger mags such as 17 mags into the 19 or 26, you can not use the magazine sticking out of the gun for extra support when shooting cause it tilts the magazine in the mag well.

  • A few people got it right but I'm surprised its not plain as day to everyone. This issue is simply when the slide is back the magazine has nothing to hinder it being pushed past its fully inserted position. Normally this would be taken care of by the magazine baseplate, but hes using extended magazines for the gun. Ramming them home with the slide locked back, he incurs this type of malfunction. He even feels somethings wrong when he lets the slide go forward, magazine too far inserted.

  • do you think the compensated models are any better than the normal ones?

  • an itneresting you dont realize is how loud they are...on camera the shots sound tame but IRL its sooo different. Great vid

  • I know what TNP is, but I have never been able to figure out what it actually stands for...

  • @TheBreakawayFilms The NutnFancy Project

  • "Never trust a broad, a district attorney, or a semi-automatic" -- Dillinger

  • OK, what's that holster called? How do you mount it sideways on your MOLLE rig? I'm interested in getting one like it. I bought a G26 not too long ago, I'll have to keep the G17 mag issue in mind if I decide to get a couple and run them. Thanks for this video; I've watched it several times already. LoL!

    Must remember the GAPPERS!!! ;-)

  • @guns4good Any feedback on the MOLLE holster for the Glock 26? Wouldn't mind trying one out for mine.

  • @Stannibal003 Haven't heard back. I think that model is discontinued, though. I have been looking for one, but I think I'm gonna go with a leg rig instead since my platform is kinda full. LoL! I have a Condor OPS Chest Rig, it rides high (kinda essential for my modified physiology), so putting the holster up there like that interferes with my AR mag deployment. I put a Maxpedition Fugly panel on the chest area of the rig, it gives me a little more real estate that I need for pistol mag pouches.

  • The only failures I've ever had with a Glock 26 was with the 33 rd mags... NEVER with any 15 or 17 round mags.

  • Getting a Glock 27 next month. Will try running extended mags and see if I get the same failures.

  • @OfficerPaterFamilias just dont slam the mag into the gun and it should be alright, Be safe and good luck bro

  • I'd really like to see one handed shooting in your run&guns.

    **Not a criticizm**

    Hell, I need to do some running & gunning of my own. Venues for such activity are difficult to come by in CA!

  • Great vid bro! Having a similar issue with my G27 and a G22 mag. I was hoping it would serve as a backup mag but if it continues to give me fits I can't trust it. Is it a break in issue or are they all just glitchy?

  • 2:49 is hard to watch. Good for tap-rack drills, but bad otherwise.

  • Nice vid once again man...i am 12 and i love my glock 19 its technically my dads but he gave it to me its only jammed onece but it was dry on the reciever so it went half way back.I love glock!!!

  • @lionidascs5 kid, glock 19 is not a toy so be careful with it ok. i use glock 19 as well and its fun to shoot. take care.

  • PFIdude is getting good at filming.

  • dam ur a good shot nice vid i subbed

  • Are those meprolight night sites?

  • What do I have to do to get nutn videos in HD? I'll pay a monthly membership if it helps to buy memory cards or something.

  • Nutnfancy: protecting the utah desert from any potential zombies.

  • Pause and hold 5 on your keyboard...lol

    I just bought an FNP 45 yesterday by way, sort of unrelated, but i just like saying it.

    15 rounds +1 in the pipe of pure .45auto power, a GIANT case, and o yeah THE GUN.

  • Comment removed

  • @SB52489

    FUCK YOU! Where do you get balls to badmouth someone who lays down their life for yours. Real manly move to not say shit to his face. So what if his tabletops are long? They are informative. Sorry if you don't have an attention span. Have you ever heard the phrase "ounces=pounds, pounds=pain"? That is why he factors weight. I would enjoy watching you run in the desert for a day with 50lbs and not complain. I think its time we talked to your mom and get you a CyberLock for the internet.

  • Comment removed

  • @SB52489 I thought you were gone. Just leave, already..you won't be missed. And you're pointing the finger at ANYONE for trolling after the way you pitched that little babbling hissy fit and unsubbed? Get outta here, you little drama queen.. Come back when you can fall back on your OWN military service and not your uncle's. -- Veri

  • @SB52489

    K bud, sorry if I offended you.

    P.S. I looked at your vids. So I guess that all you know about war comes Call of Duty? Oh and in your video of you shooting a 92FS you looked high, and you spelled Beretta like this-Baretta

  • I see this all the time... If you grip a baby Glock with an extended magazine with too much pressure with your pinky, you move the magazine just enought to have the rounds come out at an angle to causes jams. Great vid, thanks.

  • just found out youtube partners only get paid if people actually CLICK on an ad. Obviously nutn' ,being who he is, has not told us this (cuz hes too damned modest and proud of his work to care) but we should all try n help by clicking on the ads we see. more ads = more money=more ammo=more testing=more reviews=moreTNP!!!

  • So shut the he'll up

  • DOU YOU HAVE A LASER ON IT? CHECK THAT BECAUSE SOMETIMES THATS THE REASON THAT THE GLOCK FAIL CHECK IF THE LASER IS THE RECOMENDED FOR THAT NUMBER

  • nice dude

  • GEAR QUEERS.

  • I don't care what any body says nuttin is a bamf

  • @chadwick1472 Ever notice how he dosnt hang with any COMBAT VETS.. on his "shooting drills"...Its because its a joke. The only people who are into him are salad tossing leo's, and airforce duchebags. He once claimed he was HIGHSPEED in his insurgents on the hill part 3..Where he plays dress up like "Wrol" superhero...LMFAO..Hes a retired airforce c130 pilot. He shouts "light  them up" and then dumps a mag on a paper target and then puffs his chest up...yeah he punished that paper LMFAO.

  • @casulin45 Maybe they're just trying to raise their heart rates to make it more difficult and just want to have fun? I doubt he's doing this as military or law enforcement training. Take it easy big guy. You seem pretty troubled and probably have some stuff going on at home. Don't bring your problems here.

  • @bigapple0828 Nutter you are look like you are haveing a permanent stroke 24-7. And you had your trolls flag down the 20 part video series exposeing you buying your subs of EBAY...all the blue air girl accounts...YOU run like a duche. all high stepn and wrists bent..you look like a rabbit LULZ..Part time Leo...You mean neighborhood watch LMAO. 

  • @bigapple0828 I do have problems at home nutter....Im +40 and I wear fanny packs while scootering...BWAHAHAHAHAHAHAHA­HAHAHAHAHAHAHAHAHAHA......

  • @casulin45 hey stupid fuck i would like to see you ever shoot as good as this guy

  • Is the problem the slamming of the magazine into the gun?

  • Also, the 'grip magazine spacer 'on My Glock 19 & 23 mags tends to hit the heal of my hand; prevention the mag from dropping freely by it's own weight. I have small hands and still have to rip the mag out. No 'grip magazine spacer' mags drop free, .... no problems.

  • My Glock 27 ran perfect with Glock 23 mags. With Glock 22 Mags my Glock 27 would fail to strip a rounds from the mag starting about #9. I'm guessing the double-spring was returning the slide faster than the mag spring could raise the round into place. All the Glock 22 mags run flawlessly in my Glock 35. I solved the problem by not using the Glock 22 mags in the Glock 27.

  • That Run & Gun shows you what will fail

  • is the mag original glock ? try and after market brand or change the spring and try again .

  • good shooting,, but do you think the spring is to weak ( in the mag ) ? did it stove pipe or a live round slip out from the recoil ? sorta frightening i love glock .

  • Good shooting. I never had problems w/ the Glock 19 mags and my 26. I have been having this problem w/ my H&K P2000SK The last round seems to hang up like that. Today I stripped everything down and cleaned it very very well. Including the mags. I"m hoping to have no more problems as this is my new carry piece.

  • @dannyboy902911 Yeah, seriously. If Nutn thinks hes average, Id love to meet his good shootin buddies. Dang.

  • haha Nutn i think this video goes to prove that you saying you are an average shooter is BS. Besides the malfunction great shootin thanks for postin!

  • This goes to show that even the most reliable pistol in the world has a weakness.....THE USER!!!

  • I have shot at the range 19 and 18 mags in my G26, both from glock and from KCI. Aside from SoKor 'Victory' zombie mags, that are crap, I have never had a problem with the 19s or hicaps. I don't think I have ever slammed the mag in with the slide still open, though. Range is by no means T-Dub, but I will attempt to recreate the jam the next time I am at the range. It's hard for me to get that 'slam and lock' quirk to occur; Only happened a few times. Actually thought gun had broke 1st time.

  • Thumbs up to Nutn for not letting this die on the cutting room floor. (Proof aginst TNP bias!) Nothing is perfect...

  • It's simple, no ONE gun is perfect in ALL situations at ALL times w/ ALL ammo. There is a reason so many officers have BUGs, and the military issues SECONDARY weapons to their personnel, that is because that reality does NOT escape them.

    I echo Nutnfancy's ideas on your firearms as being PART of a system. Whatever that system is for you depends on your "POU", or as I like to term it "US" Usage Scenarios. Wether your system is defensive, sport based, etc. redundancy is key to fault tolerance.

  • I have had no problems with G17 or G18 magazines in my G26. There is a slight amount of play with the extended magazines, unlike the G26 magazine that gets seated on the bottom of the grip. In my opinion, Nutnfancy was probaby putting rearward pressure on the magazine with his left hand.

  • G26 with two G17 mags (+2 extensions added, all factory mags) is my EDC CCW system for going on two years now. I have over two dozen of these mags, along with some 33 rd "happy sticks" and of course the regular G26 and G19 mags (from my wife's G19). In several thousand rounds, using every one of the 19 rd G17 mags, my G26 has never malfunctioned...which I find pretty amazing. In fact, the only single non-ammo jam I've had was with a 33 rd factory mag in my G34...FTE. Still a good vid!

  • @kombatdiver1336 ah forgot to mention...my G26 is a Gen 3, and I don't use gappers, er spacers, er whatever you wanna call em. After watching this video again, I'm thinking that I'm going to avoid slamming the extended mags in with bone-crushing force (for several reasons).

  • what can happen with extended mags and no stop on the mag for the pistol frame, alot of force can push the magazine slightly past the mag release button, which will cause malfunctions, especially when the parts are polymer like in the glocks

  • I am looking forward to seeing more vids in the Glock 26. Very cool R&G with the Glock 26.

  • you could reload you gun in fornt of your face,, like that you should see if sometjing is coming or moving isnt? :)

  • I have never had this happen with the G17 mags in my 26 but there is a little wiggle room due to the mag not being as supported as the 10 round ones. The magazine sleeve would probably reduce the chance of this problem occuring.

  • My 26 has some FTF's every few rounds with the few Glock 18 33rd factory mags that I have.

  • Had same issue on G27. Treat like cup of tea, pinkies out, to quote the 3 stooges. No part of you touches mag, Try and see.

  • I RUN G17 MAGS IN MY G26 ALL DAY AND G22 MAGS IN MY G27 AND I'VE YET TO JAM OR STOVE PIPE THOSE FIREARMS. GREAT VID TO KEEP THE POSSIBILITES IN MIND THOUGH.

  • Excellent info!

  • What holster are you using?

  • i wanna see the red rider run.LOL

  • Watching these vids makes me jealous twice. Once that I can't be PFIDude and hang out with nutnfancy, and twice that I can't be nutnfancy and hang out with PFIDude.

  • @Pellegrino80.... Thanks for the good advice, hopefully I'll never have to use it.

  • i am a glock guy, and i know that any gun or mechanical device can fail no matter how near perfect it may be, but Glock is the closest thing to perfect there is, id rather have a glock that very extremely rarely jams, than some other pistols that jam more often, glock is the AK47 of handguns!

  • @blishknovk my cussy is a real lackadaisical mofo , dont ever maintain his stuff and his g works fine every time , although it must have like 10 pounds of muck in it , its the best

  • @blishknovk aqreed bro! i love qlock.. i mean, there are others out there that are qreat too, but my preference is the qlock. they're just super versatile and i love the simple look and function

  • @blishknovk I agree with that opinion.

  • i want to see this with a bone stock glock 26, no extended mag release lever, and if you hit your mags into the bottom of the gun like a freight train, of course something like this can happen, i think you should run stock glock 26 with no mods next time and see if it does the same thing.

  • i just love seeing a glock guy have their glock jam on them

  • just shows no gun is perfect and they can all jam. just have to be ready and know what you doing to fix the problem as fast as possible to get your rounds off. just have to be ready.

  • @smcombs100 A Point well made and very true. EVERY Gun can fail. Every gun. No manufacturer can put out guns or ammo all the time that perfectly match specifications for parts. Quality guns are just less likely to fail than less expensive guns.

  • @starshipfantastica

    I had similar issues with my 27/22 combo as well. I contacted glock and they swaped out my 7 year old mad. I believe the number on the top of the follower was a 6. The replacements they sent me were number 8's. No problems since then.

    All weapon systems hickup now and then and Nutn always seems to find all of them!!!

  • I use G22 mags in my Glock 27 all the time and i've had 0 failures. so far were still at 100% reliability aka Perfection :)

  • Using G22 mags in my G27 hasn't worked all that great, either.

  • Many of you probably know this but Glocks are not very fond of steel casing rounds, I can shoot brass all day in my 19, and load up one box of steel and have it jam up 3 times.

  • I go shooting with my 17 mag. in my 26 all the time, and i never once have had a jam with it.

  • Slamming the magazine in.. it Jams..

    User caused nuntnfancy.. great videos, but user error bro! 

  • If you get a tripod for your camera and hold near the base of the camera (not the tripod) it acts as a counter weight. The video will hardly bounce around while running.

  • The answer to the problem 5:08

  • In all the times i've watched glocks this is the first failure i've ever seen.

  • @DemonicWeapons true!the shooting standar fails...

  • I miss my G26. Why oh why do I sell guns to buy guns? :0/ Cool new video Nutn. (Hi Veri!) Stay cool

  • @wolvee123 I say the same things to myself.... got rid of a few rifles last year to buy a bow. Dont regret it though. lol

  • For the record, I've done IDPA matches using a 3rd Gen G26 and G17 mags and I've never had a malfunction. Of course YMMV. The only jam I've ever had in my G26 was the fault of the user (i.e. me) It's been flawless.

  • what's a "gapper"?

  • @Zeroskillet I think he means a magazine spacer to compensate for the "open" area between the bottom of the G26 and the G17 Magazine. There is a company called A&G that sells them for a very reasonable price. (Around $10 USD)

  • @beatpoet1978 Thanks for clarifying :)

  • Run the XDM 9mm Sub!!! 

  • Thanks Nutnfancy, won't be running anything but stock 26 mags for my g26!

  • Wow if you look at your first RnG video you have come a long way man .That is a like a pro combat shooting course I would pay money to shoot it . I have had the same issues with the g 19 w/ a hi cap mag when you slam it in there with out the extra plastic grip piece it will slam home when you slap the mag in.

  • NnF must have ammo donated to him sometimes cause if not,man is he spending a good chunk of his paycheck on it.Anyone out there let me know if I got a good deal from Wal-Mart. Winchester .40 cal180 Gr/50 ct $16.97----Federal .45 cal 230 gr/50ct $16.97-----CCI Minimags100 ct. $6.47,Remington 12 G 1330 vel. 11/4 oz shot 5 shot Express long range 25 ct. $11.47.Is this average ?

  • 800 Vids!!!!!!!!!!!!!!!!!!1

    JD

  • TDub claims another victim!!!

  • Yep! I had a Glock 27 and it would not function with Glock 22 or 23 magazines. Dumped the Glock 27 for a Glock 23 and later for all Glock 19s. You have to use the short magazine with the Glock 26 and 27.

  • Comment removed

  • @master5775 good question, almost makes sense.

  • good job NUTNFANCY!

  • Cool video! I am also a GLOCK lover. I run 23 but have never tried a 22 mag. Looks like I'll just stick to the factory mag for my weapon. Thanks for posting. Be safe

  • you post videos a glock and a sig jamming in a 2 month span this year..... its gonna be a bad year.....

  • Hey brother, are you in Nevada or Utah? I get confused

  • User error. Obviously. 

  • Wow! Glocks don't jam very often and I have one with 2500+ rounds through it and ZERO hang-ups..

  • @jetpowered1 and I have a jcp 40 Hi point with zero hang-ups. I only use brass though. 2k+ rounds and counting. spend the extra few cents and get good ammo.

  • NEVER had any problems with my G26 using G17 Mag.

  • Hey I was just curious what people think of the 4th Gen Glocks? I've been hearing about some issues its been having and I was just curious what other have heard.

  • @Minrow56 The very first 9mm guns had 40 cal springs, those springs were heavier, and so the guns had problems with it.

    ITs all been fixed.

  • hey nutn

    Stop calling yourself an average or slightly above average shooter. Your a beast. own it.

    -Loyal fan

  • hey nutn, if you dont mind me asking, what chest holster are you using. Im in the market and dont have a clue what to buy

  • @MFG666EmOTP THat is the Tac-force molle holster.

  • @MFG666EmOTP He has several reviews on different rigs I believe. You might search his videos. : )

    I think his favorite is the Serpa.

  • I've had similar issues due to a similar situation. My EDC is a Kimber UCII, which is the tiny Officer's frame 7rd 1911, and I ran my 8rd GovtMdl mags in a bit of haste. When the mags are gingerly inserted, the gun runs fine, but under stressed conditions and speed reloads, the 8rd'ers cause jams. It overclocks the hell out of the mag catch, inserts too much mag into the gun, and causes the feedlips to rub on the bottom of the slide.

  • i love how its a big deal when a glock jams...that just shows how good they really are

  • The only time I can mimic this kind of malfunction is if I put too much weight on the magazine with an improper grip. By this, I am "pushing" too far to the left or the right of the magazine (depending on shooting hand). Readjusting your grip or putting a grip sleeve over the magazine to compensate for the uneven grip of the extended magazine will prevent this from happening.

  • Was the G17 mag from Glock or another manufacturer? If it was a Glock mag, remember that anything mechanical does have limits and will malfunction, usually at the most inopportune time.

  • What kind of mag pouch setup are you running?

  • Impossible!

  • Your Glock's grip is all furry. It probably jammed because its shedding, guns do that in the spring once it warms up outside.

  • haha glock finaly fails so much for the "perfect" pistol

  • I bet it was the NSA, they teamed up with the people who invented the George Bush Jr Hurricane Katrina Button and the team from "Lets frame OJ" and made this Glock Jam. I knew the man would figure out a way to hold us down once again. First it was bombing those buildings and faking the 9/11 air plane crashes and now causing Glocks to jam... whats this world coming to? The end is near!

  • The jam happened.  Don't blame the messenger.

  • @Deep13Deep13Deep13 - Australian guns are known jammers. You should try an Austrian gun, like a Steyr or something.

  • I don't know, but as much as i watching nutn's videos i mind not really good about glock. I saw many pistols you runing, 1911 systems works pretty well, but glocks sux.

    I don't mind many, i don't shoot many, i just saying.

  • @StrangerOman Well I like your honest.. you have no use of the handgun. You watched a video and saw Nutn (who shoots other glocks with no problem, shoot 1911 and Sigs so Glocks suck... HAHA

  • @maloso1313 Yes, i know, but at "Snowblind Shoot" Nutn stay at range and wasting time with jams over 10-15 sec. I don't know, i didn't see anything of those this with 1911, sig and any other guns. But still glock is fine, it's just weather, dust and any others problems.

  • Always good to shoot what you plan to carry for this very reason.

  • Nutn finally got a glock to jam. I'm impressed.

  • I had similar issues with my G27 and extended mags. Not with the regular ones or the ones with the pinky extension. I did have a bad mag when I first bought it 9 or ten years ago, but that was it. I do prefer the 26 due the lesser felt recoil. It saved my dog last summer from being killed by a large pit bull. Me 1 pit bulls 0. For all the pit lovers out there, that pit terrorized the neighborhood(biting kids) for 3 years. Owners bullied the neighbors as well. Problem solved.

  • @thatguy66ish You sir = awesome.

  • @supsup195 Thanks.lol My dog had 4 staples at a cost of $400. Not bad for my best friend, next to my wife.

  • @thatguy66ish "Problem solved"... actually the problem was the owner... and still needs solved by the sounds of it.

  • @thatguy66ish It wasnt the doggs fault it had shity owners tuff guy, you 0 in my book

  • @kushyushy420 exactly!

  • @thatguy66ish should have used it on the owners as well.

  • @thatguy66ish You should have taken care of the owners not the dog, do you blame the kid for being an ass hole or the parents who raised them.

  • @kuribo1 lol both! problem parent = problem child, both are still problems :)

  • @kuribo1 Hey stupid, read the comment. It was killing my dog. Sure the owners were assholes but the dog had my dog by the neck. I then gave the idiot owners a little talk but wtf. Monday morning jerks abound on youtube as usual.

  • @kuribo1 your right, he should have let the pit kill his dog and then go kill the owners and spend the rest of his life in prison. Your brilliant

  • @kuribo1 exactly

  • @thatguy66ish It wasn't the pit bull that was the problem, it was the owner. Maybe you should consider puttn one in them as well. ;)

  • @aethiops007 There's a lot of stuff that could be said about the owners for sure. Seriously, there's only so much a person can legally do. I thank God the cops were cool and professional, and I was cleared. That's a lot these days. The owner was a loud mouth bastard, but I gave it right back and he smartly stayed on his side of the street and didn't pose a further threat. Several witnesses, all strangers to me, gave the same story, mine. The owner tried to lie, but to no avail.

  • @aethiops007 Don't joke about killing people. That's not funny, not cool.

  • @ImWatchinTheTube Who said "anything" about killing? AND, who's joking? Not me! It wouldn't be a joke if the pit bull would've bit him and his dog.

  • @aethiops007 Ah, ok, sorry for my comment, I guess it was just a mis-communication. I thought you mean "puttn one in them as well." as putting a bullet in the dog's owner.

  • @ImWatchinTheTube I was speaking of "puttn one in them"..the dog owner. But, that doesn't mean you have to "kill" him doing that. I advocate self defense to up to that point as well, within the law.

  • @thatguy66ish I would have done the same thing bro

  • @thatguy66ish Love pit bulls, but they have to be in the hands of responsible people, like guns. U did the right thing.

  • @CFvS1331 Thanks.

  • 15 dislikes. 15 people that dont like the fact that Glocks jam.

  • @Ranger4321 every gun jams giving the right defect. I have jammed Sig's before. The fail proof handguns.. Its all depends on the actual weapon. My glock 19 had some failure to feed issues. some lube and its all good now.

  • @maloso1313 I dont deny that other high quality guns jam, my SIG has jammed once before on me and once on a friend. Glock though has that selling point of "all mags fit all Glocks" and this proved that, yes a Glock 17 extended mag will fit a Glock 26, but it will also jam it if youre not careful. Ive noticed though that extended mags have a tendency to jam up guns because of the reduced spring pressure so I blame it on the mag.