I just ordered the Pour N Go and it arrives today. Hopefully it works on my car because it has no acceleration whatsoever and there's external coolant leaks outside the engine.
@n3rdbear I just poured it a few hours ago and by the 50 minute mark it was still blowing white smoke out the exhaust. I'm gonna let it sit for a day so the seals harden. Hopefully by tomorrow there is no more white smoke.
Miracle in a bottle is what i thought. But hell, it worked for me today. I have a 92 BMW 735i which had a blown head gasket and/ or cracked head. It was pouring out white smoke that smelled like maple syrup. coolant looked terrible and there was a little green on the end of my oil dipstick. *I used the pour and go stuff but i would def still at least change the coolant b4 adding BD. or do a flush if u can*
followed directions and it worked. drove it 200 miles home rite after. thru NYC 2!
I have a 98' mustang gt and oil is leaking into the radiator. I assume there is a crack in the head gasket and I want to buy Blue Devil. What are the steps i should take before, during, and after, I pour the Blue Devil sealant into my radiator?
All the people on here that's saying it does not work SHUT UP please :) I try this stuff and it worked for my car I did have to change the water pump but that was it. If you have not tried this for yourself then you need not to give an opinion if it works or does not work
it will not work. the gas is coming from inside the cylinders and will blow open any sealant product you pour in. save the $50 and put it towards a new engine, car or head repair. it's a scam.
If everyone would just replace their damn head gaskets, this blue devil crap wouldn't be wasting shelf space in stores. It isnt that hard to do, people! All you do is tear the engine down, install the gasket, and put it back together exactly as it was. Common sense.
@WyattSmits if they are living at an apartment and they only have one car and 40 hours a week then they can't do what your egotistical mind thinks. Common sense.
Sorry, but I need to ask............. why is the reason to turn the heater on and at max for 50 min? What about if the heater does not work on my car?
What did you do after it idled for 50 minutes??? Cause i put in blue devil in a v6 and i test drove it after the 50 minutes?? and it was still doing the same thing?? Did i Have to let it cool down??
@richards94,mine was 99 mustang gt.I consider it temporary fix.If the leak is small, it works better.If you plan on keeping the car, you have to fix it the right way.If you cant afford to fix, and dont really care about the car then use BD.
@BlueDevilContest I have a 4 cylinder but I tried the non pour and go stuff... pour n go seems much easier though..... Is it still working for you after almost a year?
My mechanic told me to just drain out just enough coolant to pour in the devil and leave it in for a month. I went a head and flushed the radiator. After a week it really started to work and my check engine light is off. Now i just need to fix the cause of the gasket leak(over heating from rad fans not working) and i'm good to go. So far blue devil saved me a lot of money.
No offense, but this guy flushed his radiator first. The pour and go instructions state that you don't have to do this. Does the sealant really work without flushing out the coolant first?
@creatinemuscle I have a 94 mustang that i am looking at this for..what year is yours? will it work if I have milky look in my oil or is it too far gone?
Don'T Buy this shit it don't work its need to be taken off market!!
jwallace5520 2 months ago
I just ordered the Pour N Go and it arrives today. Hopefully it works on my car because it has no acceleration whatsoever and there's external coolant leaks outside the engine.
n3rdbear 3 months ago
@n3rdbear I just poured it a few hours ago and by the 50 minute mark it was still blowing white smoke out the exhaust. I'm gonna let it sit for a day so the seals harden. Hopefully by tomorrow there is no more white smoke.
n3rdbear 3 months ago
@n3rdbear piece of shit doesn't work
n3rdbear 3 months ago
I fucking hate head gaskets. >:[
n3rdbear 3 months ago
Miracle in a bottle is what i thought. But hell, it worked for me today. I have a 92 BMW 735i which had a blown head gasket and/ or cracked head. It was pouring out white smoke that smelled like maple syrup. coolant looked terrible and there was a little green on the end of my oil dipstick. *I used the pour and go stuff but i would def still at least change the coolant b4 adding BD. or do a flush if u can*
followed directions and it worked. drove it 200 miles home rite after. thru NYC 2!
eastcoastguitar222 3 months ago
@eastcoastguitar222 also always no mateer what change the thermostat. its only a few bucks and usually part of a bigger problem!
eastcoastguitar222 3 months ago
I would rather put a few hours into a head gasket repair and get it done right.
TheGarnerjustin73 3 months ago
I have a 98' mustang gt and oil is leaking into the radiator. I assume there is a crack in the head gasket and I want to buy Blue Devil. What are the steps i should take before, during, and after, I pour the Blue Devil sealant into my radiator?
xHalfpipepaul 4 months ago
All the people on here that's saying it does not work SHUT UP please :) I try this stuff and it worked for my car I did have to change the water pump but that was it. If you have not tried this for yourself then you need not to give an opinion if it works or does not work
msepooh2001 6 months ago
it will not work. the gas is coming from inside the cylinders and will blow open any sealant product you pour in. save the $50 and put it towards a new engine, car or head repair. it's a scam.
deemilieu 6 months ago
If everyone would just replace their damn head gaskets, this blue devil crap wouldn't be wasting shelf space in stores. It isnt that hard to do, people! All you do is tear the engine down, install the gasket, and put it back together exactly as it was. Common sense.
WyattSmits 6 months ago
@WyattSmits That's easy for you to say.
irvingbr 5 months ago
@WyattSmits .. you dickweed....
onlychevrolets 4 months ago
@WyattSmits if they are living at an apartment and they only have one car and 40 hours a week then they can't do what your egotistical mind thinks. Common sense.
n3rdbear 3 months ago
i put this stuff in my car and it didnt work
garretbailey1 7 months ago
still running?
MrRichierich1990 8 months ago
Sorry, but I need to ask............. why is the reason to turn the heater on and at max for 50 min? What about if the heater does not work on my car?
alvi3636 8 months ago
I have a 98 Seville leaking exhaust gases into the coolant system via a head gasket leak. Will your product repair this leak?
kaptenkaos22 8 months ago
What did you do after it idled for 50 minutes??? Cause i put in blue devil in a v6 and i test drove it after the 50 minutes?? and it was still doing the same thing?? Did i Have to let it cool down??
emailrick 8 months ago
Yes, heater was on max for 50 mins.
BlueDevilContest 8 months ago
@TaylorGangYella - If you are referring to the steam/smoke coming out of the exhaust then yes.
BlueDevilContest 8 months ago
did you replace the thermostat ?
gotcalves 9 months ago
@gotcalves Themostat was not removed nor replaced.
BlueDevilContest 8 months ago
@BlueDevilContest was coolant getting into the oil?
Bajaheat 5 days ago
did you leave the heater on for 50 mins as well??
gotcalves 9 months ago
clean your lens next time
gabbyist 10 months ago
Sounds like an old tractor.
freeride43ver 10 months ago
@richards94,mine was 99 mustang gt.I consider it temporary fix.If the leak is small, it works better.If you plan on keeping the car, you have to fix it the right way.If you cant afford to fix, and dont really care about the car then use BD.
creatinemuscle 11 months ago
I thought you werent supposed to mix antireeze with blue devil :/ someone said it can cause clogs... or is it b/c its the pour and go?
xdyingfetusx69 1 year ago
@xdyingfetusx69 . The pour and go is a different strength than the 32 oz. If you have a 4 cylinder or v6 then use pour n go and follow directions.
BlueDevilContest 11 months ago
@BlueDevilContest I have a 4 cylinder but I tried the non pour and go stuff... pour n go seems much easier though..... Is it still working for you after almost a year?
xdyingfetusx69 11 months ago
My mechanic told me to just drain out just enough coolant to pour in the devil and leave it in for a month. I went a head and flushed the radiator. After a week it really started to work and my check engine light is off. Now i just need to fix the cause of the gasket leak(over heating from rad fans not working) and i'm good to go. So far blue devil saved me a lot of money.
jcwilkes524 1 year ago
No offense, but this guy flushed his radiator first. The pour and go instructions state that you don't have to do this. Does the sealant really work without flushing out the coolant first?
rainydaizy 1 year ago
i have a malibu ls with a leaking headgasket its lets coolant run in to my oil it run but like it wants to cut off
javien108 1 year ago
blue devil worked on my mustang no more smoke
creatinemuscle 1 year ago
@creatinemuscle I have a 94 mustang that i am looking at this for..what year is yours? will it work if I have milky look in my oil or is it too far gone?
richards94 11 months ago
No test drive & the thermostat was not removed.
BlueDevilContest 1 year ago
@piper7273
Did you remove the thermostat?
Did you go for a test drive after the 50 mins?
Did you flush the radiator?
rockzilla8 1 year ago
@rockzilla8 He answered your last question in the video - the rest I would expect an answer for...
tnmtemerity 1 year ago
@rockzilla8 You do not need to remove the thermostat or flush the radiator with the pour-n-go only the original, that is why it's called pour-n-go.
nonpoint1987 1 year ago