Straight Piped Ram Burnout

[laurenmiron199]

dude i got a 96 ram with a 5.2 and i ran straight pipes with a 5 inch tip. that thing is loud

[MoreThanJackass]

I have a 94 Ram with a 5.9L with more than 230K miles, can anybody tell me if it can do a burnout?

[allthegoodtimes]

A 4 stroke engine does not need back pressure to run but a little will won't do any harm but a 2 stroke does need back pressure run

[germanchocolate1982]

@ RUTANG1 It is true. By putting straight pipe and having no compression it would ruin your engine. I did the research and I'm glad I did. The best and easiest thing to do is to get a "glass pack" muffler and fit it to your exhaust system. You'll get the grunt without having to worry about your engine getting messed up.

[JerryMcFisticuff]

@germanchocolate1982 Leave the cat on, and you get enough more than enough back pressure. No muffler=no problem.

[leggomyeggodude]

@germanchocolate1982 ran it for 9 months before getting stopped and ticketed for no mufflers, i threw some 18 inch glasspacks on it 10 months ago and she is still running, the compression thing is a big arguement but if you take care of the motor it isnt a problem, thats why top fuel dragsters and funny cars dont have mufflers

[YoungerPrice]

@germanchocolate1982 thats a bullshit about str8 pipes fucking up ur motor.the only way u can fuck ur motor is if you run off of ur headers for about 2 months then it will slowly loss compression dont listen to fuck tards on internet forums they will take u that u need a new motor when its your spark plugs.but yea glasspacks are great!.i recommend them before a 75 dollar flowmaster

[jdog942]

@germanchocolate1982 Not true, that's only if your car or truck doesn't have and EFI system. It's that a carb is going to cause a lot more damage to your valves do to the fact that a carb prodeces more fuel than needed.

[KeepItRoostin658]

@germanchocolate1982 the compression deal is only true for 97+

[RUTANG1]

I'm thinking of cuting my muffler off and just puting a pice of pipe in its place. As of now there is a hole about the size of a pop can on the front of the muffler. Yeah so just wondering about the hole compression thing.

[germanchocolate1982]

Is it true that if you have straight exhaust (straight pipe off the exhaust manifold) that it cuts down on your compression?

[RUTANG1]

@germanchocolate1982 I'm kind of wondering the same thing. I'm thinking of cuting my muffler off and just puting a pice of pipe in its place. As of now there is a hole about the size of a pop can on the front of the muffler. Yeah so just wondering about the hole compression thing.

[FarmHand1500Ram]

greeko3 dode doesnt have a 5.7 that i nkow of and v6 stangs are slow for what they are... Dont get me started on ford v6's

[greekooo3]

i wasnt trying to knock on the ram..aswell as me thinking v6's are fast which they are not..

[v8gtx440]

@FarmHand1500Ram what are you talking about, dodge makes a 5.7l and a 6.1l hemi

[FarmHand1500Ram]

it was typo lmao when i saw your response i was like ohh wow lol

[v8gtx440]

@FarmHand1500Ram lol good good, when i saw your s/n i was hopeing that you knew better

[FarmHand1500Ram]

yeah lmao from now on im gonna be re reading everything i say lmao

[greekooo3]

also since u think v6 stangs r slow u should check out my vid where i race the chevy duramax...theres a 5.7 1500 ram next to him that i smoke but the duramax shits on both of us...hmmm v6 r slow guess not since it can take out a 5.7 hemi truck.just a thght on how slow v6 mustangs r

[tonino1991]

your mustang weights half this truck....

[greekooo3]

thats an ok burnout...my v6 stang can do a better 1....hit the vtec button bro..jk jk jk.. it looks nice i like the rear lights.sounds like ur runnin open headers but it has to b the str pips

[ConkerPucci13]

nothing to do with your video but, those wheels, are they stock? cause i like them, kinda what i'm looking for, for my Dakota

[leggomyeggodude]

yeah stock 16in wheels

[richter724]

hey we got the exact same ram. check out the pictures of it on my page....... vid's will be up soon...... but mine has a single glasspack into duals and not str8 pipe's

[ThePwnz]

hey is yours posi i have a 94 aswell but it aint posi

[leggomyeggodude]

yeah

[ThePwnz]

did u weld the rear end?

[gbirdyman]

should put some oil down first then it may spin

[SupAStarLTRE]

shauld get sum flowmasters on it :D