KJW MK1 D&R

[bluebullairsoft]

I am making a gas sniper rifle, i have the barrel already. all i need to know is if i can dissemble this gun and install a custom barrel with it still working.

Thanks, the tutorial was very good:)

[FarceMartyr1229]

Can you take apart the magazine to get to the spring? Because mine broke and I dont want to buy another mag (the mags are expensive and they suck).

[RedneckSniper832]

@FarceMartyr1229 Don't think so, sorry. 

[southaprk626]

dude u just made my day i spent 2 hours trying to put this thing back together thankyou so much

[Ap0ph1s15]

can u loosen the hammer spring because the trigger is a long and hard pull and i want to be able to loosen the spring so its easier to pull?

[RedneckSniper832]

@Ap0ph1s15 You could, or at least use a different gauge of spring, but I'm sure that you would lose range and FPS. The way the gun is designed is that the spring is both the trigger spring AND the spring that powers it....if you get what I mean. Well, just try it and see. Good Luck.

[armystrong789]

mine fell apart so i need to know how to put it back together

[vosa135]

So I have run into a slight problem with this gun....I have a KJW MKII which IS the actual sniper version of the gun, and I disassembled it according to this video. Everything looked exactly the same (except for the 23 inch barrel) as in the video and worked the same too however, once I reassembled the gun and went to fire off a shot, I realized that the trigger wouldn't pull back all of the way and make the hammer strike the mag. The safety was not on...PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!­!!

[RedneckSniper832]

@vosa135

I'll have to record a video and I don't have the time right now. Although you can easily narrow the problem down by only assembling the lower receiver and testing the trigger to see if it works. Then if it does you know your problem is is in the upper receiver.

[MegaHunter24]

if u take the orage tip off can u put a silencer on it??

[WDTWWIIKid]

wat size hex key did you use for the hopup?

[BLARG0868]

will this work with red gas?

[RedneckSniper832]

@BLARG0868 It will, but most don't use it because you have to lubricate the gun before and after use.

[slyap2005]

interm of accuracy, what weight off bbs are recomended to use on ruger mk1?

[SwedishAirsofter0]

which gas do you rekomend? Cybergun Green Gas or Ultrair Power Gas?

do i need a adapter to fill the gun whit Ultrair Power Gas or Cybergun Green gas?

[RedneckSniper832]

I use green gas, but i'm going to transfer over to propane. I've never heard of ultrair power gas, but the green gas I use comes with a adapter attached to the can. If you search for videos of your air gun i'm sure they'll detail where the gas refill is and how to refill it.

[Grasshopper257]

how long have you had the gun?

have you had any gas leaks or other problems??

would you recomend it??

[RedneckSniper832]

About a year, and the mag is starting to leak. The only bad thing is the mag is pretty much the only metal that comes with the gun. It's around $30 bucks at certain sites. I was pleased with it for the first 6 months. Right now, I wouldn't recommend it.

[OSU5312]

about how many shots can you get from 1 fill?

[RedneckSniper832]

1 fill shoots the whole mag with more to spare.

[poorbackpacker]

I've seen videos where this pistol can be easily modded to shoot at +600fps.

Would you reckon this would increase wear-and-tear and eventually ruin the gun?

[RedneckSniper832]

I wouldn't say 600 plus. But I have modded the gun. In fact it still is modded. I'm eventually going to get myself another gun so it doesn't really matter to me. I've hit people up close with it and they said it feels just normal. So it's up to you.

[OSU5312]

so the mod does increase the fps

[RedneckSniper832]

Yes it does increase it...i did a experiment..i sighted it in and then added the mod...if you don't adjust the hop-up it'll sent the shot straight up. I'd say it jumps to 480..somewhere around there.

[MBalVids]

Hmm, is there a Co2 version of that gun? Or does it use normal green gas? i would like a gun with 12g Co2 capsules.

[RedneckSniper832]

Not quite sure about the capsules, but I do think there is a attachment you can get where you can use C02 from a compressor...

[getnorm]

Do you have any recommendations for care/maintenance when using this pistol regularly?

[RedneckSniper832]

Be sure to lube it before you use it!

;)

[masteroffajitas]

How sturdy is it? Does it feel like if you drop it, you'll break it?

[RedneckSniper832]

It's mainly ABS plastic, but it's pretty strong. It rattles a little every now and than, but thats because of the way it functions. I have dropped it a few times and it still works.

[Yugobanian]

What is the FPS with .25's?

[RedneckSniper832]

Somewhere around 380 or 375

[MikeE381]

Nice video!!

[DuckyHuge]

where can i buy one?

realy good vid god to know.

[GalilxG3]

if u liv around san gabriel, they have 1 for $49.95 at evike

[DuckyHuge]

umm thx but i dont live there.

do you know eny like internet place XD?

[cottonmouth101]

shortyusa has one if your desperate but they normally jack-up thier prices. i think airsplat has one or used to have one anyway

[tatt1matt1]

lol good work

[omgimonfrie19]

Can you remove the inner barrel?

[RedneckSniper832]

Yes, you pull the metal tab down on the inside, and it slides out nicely. Great for upgrades if you find any.

[XRazorGuitarX]

HA SAFTEY FREAKS

great vid

post more please