@erndaugg, I built the manifold as described in the sdsefi website, I can't post up the link, but is in their tech page called "Fabricating a turbo header".
its actuley a 22RET. r is carb, re is EFI, ret is turbo. iv herd of a 22RETC but not sure what it is. a 22ret is a 22re but with low comp rings and a turbo. a 22re is a 22r block with efi straped in their.
i thought that a 22r is carb because i got one and it has a carb on it a 22re is efi i think you have the wrong sticker because the only difference is one is efi and one is carb
Im doing the same setup on my stock 22re. how many pounds of boost are you running and are you running any performance injectors or any fuel management
I'm running 11 PSI now, and the injectors are from a Supra (440cc). Engine management is Megasquirt ,V2.2 board, flashed with MegasquirtnSpark-extra firmware, and add-on flyback board for the low impedance injectors, and another add-on PWM board for driving a 3-wire Bosch IACV. The V3.0 board already has these add-ons on the mainboard.
Nice! Im running 5 lbs with an airesearch T04 with stock injectors and stock ecu for now. I just adjusted the richness with the AFM, and retarded the timing a bit. It scoots along pretty good. Everybody has been telling me to get megasquirt though.
is it a 22r better than a I6 supra engine?? because i have a toyota celica and i want to make a fast car and i know that i have to make some mods so it looks like you know about this engines so please can you tell me what can i do???
gotta love that engine, and with what you've put on it, well...(beyond) nice. Still sounds kinda gnarly idling, but every one I've heard does, and i like it. They sound odd, but run great and forever.
what is that sound coming from the top of the head cause my truck makes the same sound but its not a turbo. i adjusted the lifters but it still wont go away. please if u could send me a personal message on this.
i want to do the same thing but just wondering wat exhuast manifold u where useing
erndaugg 1 year ago
@erndaugg I'm going to go out on a limb and say SteedSpeed? I think they are the only makers currently of top mount turbo manifolds.
TDFStudios 9 months ago
@erndaugg, I built the manifold as described in the sdsefi website, I can't post up the link, but is in their tech page called "Fabricating a turbo header".
bugturbo67 5 months ago
22-R = 22-Rocksolid!
prodriver1 1 year ago
C = California emissions compliant for that vintage
jay019com 1 year ago
awesome motor,my 22r just had new valves and recon head,its a 1990 and it floged a new hilux lol
tonza123456789 2 years ago
This is a 22RE, because it is electronic fuel injection(EFI) a 22r has a carb.
projectleake101 2 years ago
If you read the sidebar, it says he replaced the carb with the EFI unit and the turbo.
bigtoyota479 2 years ago 2
pretty sure that it can be eather way 22r (efi) or 22re(efi)
shaej90 2 years ago
No, you are quite wrong, 22R = Carb, 22RE = EFI (hence the 'E'), then there is the rather rare 22RET (turbo).
hurricanefloyd1 2 years ago
its actuley a 22RET. r is carb, re is EFI, ret is turbo. iv herd of a 22RETC but not sure what it is. a 22ret is a 22re but with low comp rings and a turbo. a 22re is a 22r block with efi straped in their.
acenutts 2 years ago
i thought that a 22r is carb because i got one and it has a carb on it a 22re is efi i think you have the wrong sticker because the only difference is one is efi and one is carb
mgsfatfriend 2 years ago
stock they come with the ct20, built for toyota but alot of people use the stock garret t3
proprietary1 2 years ago
does the injectors from the supra 440 fit the 22rte with out modificatiosn or modifying the ecu ?
cabronhem 2 years ago
I've always wanted one of those....turbos..
KiroTheGreat 2 years ago
Check out my 20r22r hyrid build video with information using 99% stock toyota parts
natescraigslist 2 years ago
Im doing the same setup on my stock 22re. how many pounds of boost are you running and are you running any performance injectors or any fuel management
MasterYota4Runner 3 years ago
I'm running 11 PSI now, and the injectors are from a Supra (440cc). Engine management is Megasquirt ,V2.2 board, flashed with MegasquirtnSpark-extra firmware, and add-on flyback board for the low impedance injectors, and another add-on PWM board for driving a 3-wire Bosch IACV. The V3.0 board already has these add-ons on the mainboard.
bugturbo67 3 years ago
Nice! Im running 5 lbs with an airesearch T04 with stock injectors and stock ecu for now. I just adjusted the richness with the AFM, and retarded the timing a bit. It scoots along pretty good. Everybody has been telling me to get megasquirt though.
MasterYota4Runner 3 years ago
it's a 22rte not 22ret
iggy559 3 years ago
is it a 22r better than a I6 supra engine?? because i have a toyota celica and i want to make a fast car and i know that i have to make some mods so it looks like you know about this engines so please can you tell me what can i do???
SUYJO 3 years ago
gotta love that engine, and with what you've put on it, well...(beyond) nice. Still sounds kinda gnarly idling, but every one I've heard does, and i like it. They sound odd, but run great and forever.
lobsternoob 3 years ago 2
PLEASE STOP CALLING YOUR 22ret a 22r you keep getting my hopes up. i want a turbo for 22r very bad.
holyluke 3 years ago
what kind of turbo goes with the 22RE? I'm looking at getting one but dont know where to look
liljack040508 2 years ago
please stop caling 22re 22r got my hopes up that some one made a turbo for 22r
holyluke 3 years ago
you can hear the notorious 22r knock
Da808Tabs 3 years ago 2
if its not knocking or ticking you have a problem.
holyluke 3 years ago 4
holyluke u are a fucking idiot. they would never have sold any 22r based vehicles if they sounded like that new. dont ever speak again
zombielife08 2 years ago
Comment removed
inv3nt1 2 years ago
how many horses?
mfuji0001 3 years ago
I dont know.. no dyno here.
bugturbo67 3 years ago
what is that sound coming from the top of the head cause my truck makes the same sound but its not a turbo. i adjusted the lifters but it still wont go away. please if u could send me a personal message on this.
videovirgins 4 years ago
if you overtighten your valve cover, if your timing is off..or cuz most 22re's make that noise
jakejjs 3 years ago
Hi whats the model of the turbo that u installed on the 22R
Capitanohar 4 years ago
I have a GT-2871R on it, Garrett ball bearing turbo, .63 turbine housing, T3 flange, external wastegate.
bugturbo67 4 years ago
The megasquirt uses a map sensor. airflow meters are obsolete.
onefast87 4 years ago
where the hell is the air flow sensor on that
kona447 4 years ago
SWEET
91mr2sw20 4 years ago