maybe your servo is no good take a good servo and hook it to the channel that you say is bad
macdaddy1600 10 months ago
Very good ;)
billybob0018 10 months ago
it might be a problem with the servo.
try putting the two servos in a y harness. see if it works if it still doesn't get a new servo
ndc6854 11 months ago
HI it looks like you have swash mix set to 90 degrees you need it on 120 3 servo ccpm
Alter this and you will be nearly there, just adjust the swash mix, I have a vid showing the setup on my site.
Gary
GaryGraham66 2 years ago
@GaryGraham66 Hi Gary. Just to let you know that you were correct with this! Thanks mate
dazjhar 11 months ago
@dazjhar Glad to help mate (c:
GaryGraham66 11 months ago
Loading...Saving...
Loading...Saving...
maybe your servo is no good take a good servo and hook it to the channel that you say is bad
macdaddy1600 10 months ago
Very good ;)
billybob0018 10 months ago
it might be a problem with the servo.
try putting the two servos in a y harness. see if it works if it still doesn't get a new servo
ndc6854 11 months ago
HI it looks like you have swash mix set to 90 degrees you need it on 120 3 servo ccpm
Alter this and you will be nearly there, just adjust the swash mix, I have a vid showing the setup on my site.
Gary
GaryGraham66 2 years ago
@GaryGraham66 Hi Gary. Just to let you know that you were correct with this! Thanks mate
dazjhar 11 months ago
@dazjhar Glad to help mate (c:
GaryGraham66 11 months ago