i got a 2 stroke gasgas 250 ec. and i was unscrewing it and my screw fell into the filter. will anything bad happen to it??!!?!. btw thanks man. it sure helped me
@MyHamburgerhelper dunno mate, did you check the spark plug? if you use too much oil or dont rev enough it can foul up. clean the plug, drain as much oil out the pipe as ya can then try to start it and once it warm enough rev the pants off it for about a minute to clear it out lol.... if it aint the plug then try a top end rebuild.. I use 40:1 fuel_oil ratio in my cr cheers
@MyHamburgerhelper try unplugging the kilswitch, mine had a short in it and it would make my bike stop running all the time, and for the oil in the exhaust that happens. an yeah run 40:1
hey man i just got a 2002 cr 125 and it wont start now i look at the head and thegasket is leaking when it take the top head off do i have to drain the antifreeze out or can i just unplug it from the top of the head
This has been flagged as spam show
i got a 2 stroke gasgas 250 ec. and i was unscrewing it and my screw fell into the filter. will anything bad happen to it??!!?!. btw thanks man. it sure helped me
XD
RcCarzNDrumz 2 months ago
i need to rebuild mine but dont know how! :(
hellonwheelz22 4 months ago
you blew it almost 14 days later again
killer4life1000 6 months ago
@killer4life1000 nah i didn't :P, what makes you say that?
guitarboym12 6 months ago
@guitarboym12 i cliked the tabb it was jan 3 2011 rebuilding it again
killer4life1000 6 months ago
@guitarboym12 would this b a good beginner bike? i am great with a clutch on atv's but ive rode 4 strokes but never 2 stroke
killer4life1000 6 months ago
really cool, nice. :)
441344302908 1 year ago
@441344302908 cheers Andy xD
guitarboym12 1 year ago
i just got a cr125 like 3 days ogo and it ran fine for a day and stoped yesterday.so i took the pipe off the the bike and there was oil in the pipe.
what do i do
MyHamburgerhelper 1 year ago
@MyHamburgerhelper dunno mate, did you check the spark plug? if you use too much oil or dont rev enough it can foul up. clean the plug, drain as much oil out the pipe as ya can then try to start it and once it warm enough rev the pants off it for about a minute to clear it out lol.... if it aint the plug then try a top end rebuild.. I use 40:1 fuel_oil ratio in my cr cheers
guitarboym12 1 year ago
@MyHamburgerhelper oh yeah, make sure your carb is properly jetted, not too rich. Look in the manual
guitarboym12 1 year ago
@MyHamburgerhelper try unplugging the kilswitch, mine had a short in it and it would make my bike stop running all the time, and for the oil in the exhaust that happens. an yeah run 40:1
btbierman 1 year ago
@MyHamburgerhelper also some times the radiator fluid finds it's way into the pipe that's what happened to me.
pumpkinman47 5 months ago
hey man i just got a 2002 cr 125 and it wont start now i look at the head and thegasket is leaking when it take the top head off do i have to drain the antifreeze out or can i just unplug it from the top of the head
MyHamburgerhelper 1 year ago
@MyHamburgerhelper Hey Mate, you gotta drain the coolant....
Good luck! xD
guitarboym12 1 year ago
hey dude, it's kinda cool ;)
Heinrich10645 1 year ago
@Heinrich10645 cheers dude! xD
guitarboym12 1 year ago
Nice :)
BMBsWhyNot 1 year ago
@BMBsWhyNot cheers mate, how is your KX250F ?
guitarboym12 1 year ago
@guitarboym12 Non existent i'm afraid :/ :P
BMBsWhyNot 1 year ago