HHO 354 Plate Monster Hydrogen Generator Build Part 5

[corbonzo1]

Do you have to use a mixture of Potassium Hydroxide and distilled water for dry HHO fuel cells?

[delvis11]

@corbonzo1 My cells do because they are warrantied but it will work with other electrolytes.

[TechKidusa]

is your flashback arrestor airsoft bb's?

[delvis11]

@TechKidusa I'm not sure what is in it. I am a reseller of these. But they work great!

[WulfBand]

What is your goal for producing so much HHO ?

That is what are you going to using this on ?

[delvis11]

@WulfBand It would make a great cutting torch. Boosting a 1 megawatt generator comes to mind also.

[markojovanovic1]

Hi, good work, I like it.

How much is that efficient, I mean 9.5kW for 50l/min or for 9.5 kW I got 3 cubic meters HHO per hour, is that enough to heat water in boiler and to use it for heating house?

[juceagso]

What marvelous project developper you are. That work is neat !!

[terrymccurter]

I wanted to tell you something about how hho might be igniting without a spark . If someone were to use water even with a small amount of clorine This is extreamly dangerous hear is why . If you combine hydrogen , oxygen, and clorine all it takes is any kind of light source to ignite it. Many people dont know this perhaps those that are serious will read these posts . be safe love your work .

[fishfrizbee]

run your car on water. This guy does just that!  this is the name of the video go to min 7. 22 seconds he talks about compressing hho

[fishfrizbee]

you know compressed oxygen has loads of uses to. Pure oxygen is great to breath Normal house hold air has a small percentage of oxygen and they have medical oxygen for those folks that cant breath well and plus you could run tools off it I dunno but i would like to have a system that allowed me to capture the oxygen as well. Under water submarine? Spaceship? scuba diving?

[Peebukas1]

@fishfrizbee FYI pure oxygen is poisonous over any extended periods.

[fishfrizbee]

Dude I was watchig your video and you were explaining about how hho cannot be compressed safely because it explodes. In this video called " run your car on water. This guy does just that! " also on youtube He talks about how there is a chemical that allows you to compress it safely but it has been made illegal because it is used in thermonuclear bombs (weapon grade substance) even though it isn't Dangerous in any way. Tell me what you think???

[fishfrizbee]

Bad ass how much could you produce with a solar panel. to heat a house in winter? how much would you need. Have you heard of graphene? as a possible material to make electric panels? super thin strong and 1000 times more electricly conducive than copper look it up, what do you think.

[bigbryjack75]

Holy crap you could run your power geny to run the cell and then run another geny for strait power how sweet would that be no FF just strait homemade power! Amazing dude!

[delvis11]

@bigbryjack75 no overunity here, sorry

[NOBOX7]

hey man thats one bad ass device there, wish i had $6000 dollars laying around,

any way besides the fact this cell kicka ass i just wanted to share something with you, i have bin doin alot off research on flames and found that small copper tubes, or small alluminum tubes if will nit allow a flame to propigate threw them, if the diameter is large the tube must be very long if u use many small tubes it can be small, this is way cheaper and smaller then sum bulky flash arrestore devices,

[mikejollie661751]

nice wiring

[pit61272]

you know sonic ...combo that with lower volt & amper ......you see !! from greece ...not inox .. titanium !! 12 v 46 liters 20 amps

[4flyingtigers]

IMHO - Means: IN MY HUMBLE OPINION

Steve, great work!!!! You are a talent that the world needs.

[tmber01]

Very nice setup Steve. I'm somewhat surprised, however, that you didn't use two colors of tubing; one for input and another for output. It seems like that would make it a whole lot easier to follow, both for the observer and the builder. What do you think?

[altern8energy]

from what I can see, it's 4 88 plate series cells wired in parallel?? parallel circuits draw more current, which eats up the power. there was an article that some CalTech students had a special Molybdenum alloy that was showing extreme promise in HHO production.. Would be nice if someone could get that alloy property and reproduce it.

[mikepowers420]

IMHO = in my humble opinion.. It's text speak, and what I feel to be a massive alteration of the way humans communicate. It sort of like a physics equation were each symbol equals another equation.

As far as the new multi-cell --- WOW.

I still would like to see you integrate pulsed and solid mag-fields and deep UV into the cells, but oh well. I still think this one is very cool - IMHO..

:)

Peace.

Mike..

[frubbers02]

amazing stuff bro, would you think youll be able have that HHO gass feed the generator? or i just got another crazy idea, have the HHO act has a bubbler for gas to run the generator? Ive been interested in Vaporizing gasoline, and was thinking of a system to incorporate both into an engine. but like you said hho is to dangerous, and gas vapors are just ass bad, smallest spark can set it off

[nTrudr65]

IMHO = In My Humble Opinion

[THEWATERENERGY1]

REAL NICE WORK !!!! HE IS RUNNING VERY SMOOTHLY......AND PRODUCTION LPM LOOKS VERY NICE !!! IF YOU HAVE THE TIME WILL YOU RUN THE WITHOUT KOH ONLY TAPWATER...????

SO WE CAN COMPARE THE DIFFERENT...????

NICE TO WARNING THE GUYS OUT THERE !!!!!

THANKS FOR SHARING THE INFORMATION....THERE IS ALWAYS STUFF TO LEARN ...THANKS....

[delvis11]

@THEWATERENERGY1 I only use distilled water. the minerals in tap water can damage the plates.

[THEWATERENERGY1]

@delvis11 LIKE TO SEE THE PRODUTION !!! WITH OUT KOH!!! ONLY DISTILLED WATER !!!!

[nTrudr65]

Also looks like your gas production is back flowing into the reservoir. Correct? Shouldn't you make sure gas production go out through the bubbler?

[delvis11]

@nTrudr65 HHO comes off the top of the reservoir, no water. Out to the bubbler one way.

[nTrudr65]

Should you be worried about producing 40-50 LPM and venting that into the air around you?  That could easily blow and poof! You should think about containment of the gas IMHO.

[delvis11]

@nTrudr65 The area is well ventilated. Anyone know what IMHO means?

[HydroJimVideos]

@delvis11 IMHO(in my honest opinion)

[sixpack127]

@delvis11 In my humble opinion

[TheSanwiches]

@delvis11 IMHO = In my humble opinion

[InventorGadget]

nice, i really like that you keep refining the systems!

Remember to do the melt-a-alu-can-with-lots-of-lp­m-test :D

[shartne]

Goodness thats thing is a monster of HHO machine! nobody smoke please!

[KyleCarrington]

Steve, you are, without a doubt, one of THE most practical, proffessional, and downright helpful friendly builders online, so please don't take this wrong... but... on the topic of safety... you are about to use 7000 watts+ of 240v electricity, without mains isolation? Don't let that juice find a ground, through... you... cause that too, if VERY dangerous!!! HHO doesn't want to lose one of the best! Careful!

[delvis11]

@KyleCarrington I have the box grounded, isn't that enough or do I have to ground the gas generator too?

[KyleCarrington]

@delvis11 I guess in theory the main threat is the device taking a shorter route to ground, given the high voltage. I am not an electrician, but "the heavy part" of mose huge battery chargers and welders is the isolation transformer. Fortunately with an HHO device, most of the time you are touching non-conductive materials and not the metal, etc. Where you might get into trouble is "outside operation". .. cont...

[KyleCarrington]

... cont .. Guys have made home made plasma cutters, welders etc, wired by means of straight off rectifiers (like your device appears to be). The device is grounded to mains ground, but the threat is when heavy watts are moving to a circuit, YOU (touching the device) could provide a "shorter" means to ground, than the cabling does. A wet floor, with concrete has been the guilty party, or worse yet, outside. That's how I understand it. Wear rubber boots and gloves if operating outside?

[delvis11]

@KyleCarrington thanks for the advise!

[KyleCarrington]

@delvis11 Thank you for all your advice! Wow, your channel is an education, for sure. By and large you'll probably be fine unisolated, but outside .. on wet ground, grass... might be whole different story. There is a larger risk, inherently with welders and plasma cutters given their nature... but I figured considering you were raising the topic of safety... why not mention it! I'm putting isolation on mine, because I want to be able to lay under the truck and cut metal, etc., not be concerned.

[KyleCarrington]

I have a torroidal isolation transformer suitable for my rebuild I am doing, based on your videos of a 110v 58 plate drycell. For yours, though, something like this would provide rock solid safety and portability. temcoindustrialpower . com / products / Transformers / FT2065 . html

[sylvanenergy]

Hello Steve, nice controllers! the project is looking great!

[dmdingman]

Great video Steve. I Can't wait to see the performance numbers. Let's see, 1st time test of the power controller, "works as planned, 1st time test for leaks, none, 1st time run with this cell design, generating a whole lot of gas. and I'm sure this done on the first take, and the video wasn't edited. You've done well. Denny

[delvis11]

@dmdingman Ive learned a lot from many mistakes. I spent a lot of time and money on the 118 plate build to learn what not to do. This gen is flowing real nice and I have hit 30 lpm pretty easily. The next video should be fun.

[calskin]

Is it just me or have you had WAY more output with a smaller cell?

By the way, I really enjoyed watching your videos and how your progressed through your research.

[delvis11]

@calskin This was just the first start up and I haven't pushed the cell real hard yet.