Added: 1 year ago
From: DeathCuberK
Views: 89,950
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (258)

Sign In or Sign Up now to post a comment!
  • lol, just buy a dayan or some other speedcube rubiks brand is crap

  • lol why am i watching this?

  • haha he said lubricated.

  • @RunescapePs4TW hahah I see immature kid who just learned about this lube and sexual lube....little kid

  • Green sock lol

  • he didnt finish it...he disassembled it -.-

  • Are you mental? Why not just sand down the sides when it's disassembled. You assembled it, only to disassemble it 1/3 of the way again to sand down the sides. Also you can sand down every side of every edge and corner when it's disassembled. Sorry, didn't mean to rant there but there's a much simpler method opposed to your repeating assemble/disassemble method

  • your sock's are dirty man.

    

  • oh,haven't anyone smelled something? (aziz900078 sayed in 1:13)

  • just buy a diy, it's a lot cheaper and easier cube4you.com

  • why the heck is misternumberno talking to misternumberno

  • oohhhh ahit im on the 2 level of the wierd side of youtube lets c how far i can get

  • @hashbitches lol from lvl 2 to lvl 4

  • @kyde33 i made it to level 9 before i quit

  • I'm a PC enthusiast, and I see this as "overclocking" your cube! O.o

  • @misternumberuno so how do I overclock a PC?

  • @39unknown93 Step One: Have an overclockable BIOS. Step Two: adjust FrontSide Bus Clock Speed. Be very careful and know what you are doing here; this procedure can vary between motherboards and, if done wrong, can break your CPU and/or MoBo.

    In the unlikely event that you happen to have a CPU with an unlocked multiplier, you can use your BIOS that is overclockable to simply increase the multiplier. My CPU is an Intel Core 2 Quad QX9650, which is unlocked, meaning that I overclock it

  • @misternumberuno by changing the multiplier.

  • @misternumberuno When you do this, and you have a set goal on your clock speed you want to acheive, go in small increments and thoroughly benchmark and stress test each increment to check stability. Have a fan controller and temperature sensors. Know the max operating temp recommended for your hardware. Water-cooling over air is recommended.

  • @misternumberuno That's just an overview. First, learn a whole lot about hardware. Then, learn a whole lot about OCing. Then you are ready to take a 2600k to 5.

  • @misternumberuno Also, you would probably need a new PC, depending on what your current is.

  • @misternumberuno thank you. :)

  • or you can buy like any other brand from amazon and it will be a million times better without any mods rubiks brand are terrible

  • i never see the inside of an rubik cube till now....but i think its a lot of fun with that cube

  • who else saw the yellow stain on the sock? XD

  • lubrication and socks...hmmmm ಠ_ಠ

  • LMFAO HE SAID LUBRICATED!!! LMAO

  • Comment removed

  • Or you could stop being a faggot and spend 5 more dollars on a speed cube

  • How did i get to this from hoe to do a backflip!?!?!

  • Nice! I'm going to have to try this with my Rubik's brand cube.

  • omg i have that exact sock ^.^

  • i have that same sock! :D

  • designated driver anyone ? lmfao

  • @kittenestkatwhat is more sad though, someone making this video, or somebody watching it?

  • @TwoTekah

    lol, it gave me reason to keep watching

  • @kittenestkat pathetic.

  • @TwoTekah

    wow get a life... tho i know must be hard for u, but at least try. good luck wit dat ^_^

    oh, and ps... consider urself blocked. have a nice day.

  • @kittenestkat how stupid of you ^_^ if i didnt have a life, i would be dead, and dead people cant type silly ^_^

    PS. You should try taking a remedial human biology course ^_^

  • 2:50 *screeehhh* makes me gritt my teeth

  • I can barley solve my cube and I'm going to take it apart?!?!?!

  • @BlackBricksStudios If you take it apart, you can reassemble it in the fixed way.

  • this is the worst way to make faster the Rubik `s cube

  • dont do this it fucks your cube up big time...

  • he sounds like Mclovin lol

  • zhanchi is better in my opinion. nice vid LOL

  • how did i go from cups to rubiks cubes?

  • lol lubricated :)

  • i just use a sock but any cloth gets the job done lmao

  • That's not the only thing he uses that sock for

  • i was watching this. couldnt take it apart so i threw it at the ground. needless to say its completley broke... problem soved

  • I open my rubiks cube the same way, but i sprayed silicon spray on this parts and have the same effect i didn't destroy it

  • hold on.... you just love to sand down peices of a rubicks cube.... for satisfaction?! are you 6?! or are you just mentally unstable....

  • @AStrangeDwarf How is that weird? Its a craft hobby. I dont know what is wrong with that.. Its like saying, "Hold on... You love to oil your car everyday, For satisfaction? ARE YOU 6?! Or are you just mentally unstable?"

    Kid, your just a dumbass. Learn to take some non stereotypical classes. Just that he likes to sand cubes doesnt mean he is mental. You can say he's high. But not mental.

  • @shadowninja708 i find it commical how i get so many haters from my brother finnishing my comment when i go to pee i meant to say high, i would never use the words "mentally unstable" thats stupid?...and really disciminative if you want to hate on someone go to his channe not have a go at me... this is his username:

    Paperdragon97

  • Comment removed

  • I have modded a rubics brand cube, and it is currently my best speed cube, and I have a Dayan, an A5, and many others that i cant remember the names of, and its still the best, but it takes MUCH more than sandpaper and lube...

  • sorry i mean baby powder i think its that

  • Or just buy an F(II) and have an actually good cube out of the box.

    I seriously doubt you're going to get good corner cutting with a Rubik's brand without getting excessive popping.

  • If you want a really smooth cube, go to amazon.com and look up cube4you 3x3x3. Choose the first white one. It's amazing! (and cheap)

  • @K1LLZ100 that depends on the type...

  • "i just like doing it for satisfaction" lol

  • Why not just sand the sides while the cube is apart?

  • add vaseline hurp derp makes it slide faster than ice like 2.5 x faster

  • @Dushrea

    vaseline eats at your cube and oils and dirts stick to it so if you take it apart it again it will be all messy and oily

  • @Dushrea Vaseline is horrible for your cube...

  • Does anyone else find this video oddly relaxing?

  • is a minute and a half good for not doing finger tricks?

  • @FastNHard99 not really...

  • He didnt fart he dropped a cube.

  • but it works i have 4 3x3x3 cube that can spin like butter

  • he just made the video to cheat

  • Comment removed

  • SUPER SPEED CUBE MOD!! OH YEAH... NERDLOSER!! have fun cubing??!! WTF world are u in??

  • did you find this mod by yourself????Great...'couse every cubers learn that trick since day 1 of speedcubing...

  • @TsopiLNL i remember te days b4 i got a good speed cube

  • Mod that is way better than this: go on amazon and buy a dayan guhong for 10 dollars...

  • just for you know... satisfaction. hahahha

  • @Apolloman00 fartz!!

    \

  • @Apolloman00 ahahahhahahh ^^

  • I don't even own a rubiks cube,why am i watching this?

  • low life...

  • thats not a mod. its a trick

  • @Tidleycastles It is a mod, he is modifying the cube to work differently. Mod is short for Modify

  • This is how I solve my rubiks cube.

  • Someone get this guy a Guhong!

  • THX A LOT!!! It worked, i didn't want to go buy the spray.

  • is your wall out of lego?!

  • I bet that sock doubles as a nut rag o.0

  • Comment removed

  • would it not be faster to sand the core... if it's to stop friction between them it wouldn't matter which part you do so save some time and sand the core :)

  • Ne bazd má el a rubik kockát! Tudod hogy szegény Rubik Ernő mennyit baszakodott ezzel???

  • He sounds like a retard saying " This is an AMAZING CUBE"

  • @Apolloman00

    That's not a fart, it's more like a chair.

  • This sounds like a Paid Programming for a condom

  • @EliteSniipez13 youre gonna want to take very fine sand paper just sand it down, i am never buying a condom from that company

  • @jacktheripperrules Dont buy anything from Paid Programs except for Snuggie's and Sham-Wow's

  • lol fart 1:45

  • im so sick of people stretching the fucking truth. to many people make video's and CONSTANTLY stretch the reality of the situation...

  • thumbs up, good idea... took 2 seconds to do and worked well

  • I have a better mod. Soak your Winning Moves (lol) brand cube in superglue and let it air dry overnight. What's that? We're making it FASTER? Hmmm, yes I'm pretty sure this mod will actually make it faster than it is out of the box.

  • lmao vaseline is a terrible lubricant! use silicon spray instead

  • BUT WILL IT BLEND?

  • 8:00 are you high???

  • @bjfcheerpsycho He isn't. He's low.

  • @bjfcheerpsycho I think he is..

  • loool press 3 and then 8 ....bWAHAHAHAHAH

  • That's the easiest way to solve it

  • Now i know how ppl are getting world records >.>

  • whAT the hells a rubix cube

  • @lenahanson wow really

    

  • @Logo3801 no just seeing what u would say XD

  • Does a sock really work 'perfectly' for you...? 'Cause this whole thing isn't working for me....

  • You talk like a retard

  • 1:16 - 1:21 i laughed so hard!

  • or you can simply buy a diy online from cube for you or from cube smith which is my favorite. and btw i noticed you use patrolium jelly, try crc or jigaloo silicone lube,

  • i guess im in dat weird part of you tube

  • WOW. how did i get here..

  • 1:46 fart

    

  • 1:18 Great. Now i have a Rubiks Cube that smells like a fuckin pair of socks.

  • Dude.

  • fck u i have same rubiks

  • he ha s one dirt sock

  • By not completely sure if necessary i went looking for an other smooth-mod..

  • i just use a sock, works perfectly...

  • OK FRIEND IF NOT CLEAR THAT IS NEVER WORRY BUT OTHERS TO COMMENT THANKS FOR YOUR INPUT

  • That was the best mod I have tried yet. I would really recommend it.Thank You!!!!

    

  • 2:14 thats how my rubiks cube looked after i throwed it down on the floor.. except that middle thing with 6 sides.. it lost 2 sides. so i cant even repair it.

  • they all cut better if you push them in the back

  • i just took apart my rubix cube

  • My name is very very amazing

  • This method raises POP is not recommended

  • @prole76 No...

  • rubiks cubes aren't the only thing that sock is used for

  • Thats how I always solved those darn things. lol

  • I scroll down to reply to a comment and I scroll back up and his cube is in peices XDD lol

  • Just finished the mob. Took about a hour. Thanks for the upload if the video. It worked great. ^_^

  • wat about 150

  • Nice sock, bro

  • think fogal

  • youre a faggot.

  • or just put some vaseline in your cube fuck tard. takes 2 sec and u dont have to fuck up your cube....

  • @mkp333 vaseline fucks up your cube worse fuck tard, use lube fuck tard

  • I can´t open my cube!!

  • That's how I solved my rubiks cube after I threw it in the wall..

  • my cube is already sanded, 14 years of continous scrambling can do that easily

  • sock

    

  • you used your , youre'e a freak

    

  • @huskskater i watched a 3 hour vid about a rubiks cube and on the first try my cube would not move

  • just throw some vaseline on it... its faster

  • 1:46 fart?

  • Have fun ''cubing'' ?. . .

  • go lose your virginity

  • Comment removed

  • It sounded like someone is eating.

  • Thanks!

    

  • It Also Works With Nail Filers

  • how did i get here i was watching minecraft videos xD

  • I jsut watched a 9 minute video on how to sand down a rubik's cube when i don't even fucking own one >.<

  • @huskrskater hey,you shouldn't complain. i watched a 30 min vid about 100 ways to love a cat and the next week we had to take my cat to the vet to put it down.

  • @huskrskater i have one.

  • @huskrskater I always do crap like that XD I learn a song on guitar so while I'm all happy about it I watch some drum lesson on a 5 minute song I've never heard or bothered to look up afterword. XD

  • @huskrskater holy shit, i think i was the only one D:

  • @huskrskater HAHAHAHAHAHAHAHAHAHAHAHAHAAHAH­AHAHAHAHAHAHAHAHAHAHAHAHAHAHAH­AHAHAHAHAHAHAHAHAHAHAHAHAHAHAH­AHAHAHHA.......me to though :\

  • @huskrskater why?

    

  • @huskrskater Mission accomplished!

  • @DeathCuberK can you use a file instead of sandpaper??

  • I just use a sock...LOL!!!

  • "I just use a sock..."

  • @EinhverGaur not even close...

  • ooooooooooooooooo LUBE

    

  • geez this is stupid

  • i did that on my neighbour's carpet