This comment has received too many negative votesshow
Wow, a 6 minute video dedicated to a fucking tape gun? People do have a slight sense of making everything just a bit more complicated. Go drown yourself.
Thx for showing how to load. Your instructions much easier than those included with ATG. I have a problem when using the gun...the adhesive balls up rather than laying flat. What am I doing wrong?
I currently use the ATG 714 tape gun. I print out 6x4 pictures I have printed and using the tape gun put them on 7x5 card stock. I just put tape on all four edges. I am wondering if you think that using the 1/2 in tape might be a better route to got to tape more surface are area down.
Thanks for sharing this video. I purchased the ATG today and was frustrated trying to load the tape for the 1st time. The instructions that come with it are useless in my opinion. I decided to youtube seach on how to load the tap and found your video. THANKS! I was finally able to load the tape without any problems.
i realize I am post to an older video.. I have a pink atg gun that os newly relesaded . I have the WORST time refilling it/ I followed your video step by step , but the adhesive is not coming off on the paper. Please help me
This is my second thank you. It has been quite a spell since I loaded my tape, and yup, I forgot again. So glad I saved your video in my playlists. Your instruction is concise and shows very clearly how to load the tape. Thanks you so much for taking the time to make this.
Thank you for your very instructional tutorial. I went into Michaels today and found one of these, and using my 40%coupon was able to get a good deal:) your instructions were very easy to follow, and as I am a visual learner, written instructions do me no good. But this worked like a charm:) Thank you again!
Sending a big Thank You for showing how to load the ATG Gun. I just got mine. I think the only problem is that I am left handed and I think it is harder to see where your putting the adhesive down. TFS :)
Is the used paper strip supposed to pass over the top of the left roll? Mine returns back behind the left roll then twists to make it over the right roll since they have the right side platform raised about 1/2", therefore it is even with the left side which causes the tape to twist. My tape gets looser when I use it so obviously I'm doing something wrong. Heeelllpp please.
I am ready to pull my hair out!!!!! ARGHHHH!! lol. I got my atg gun about a month or so ago now. The first time I put tape in it it went in and worked like a charm. Tonight however ...different story. I run out & go to refill it and it won't work. I watched 3 diff videos just to be sure I'm doing it right but still no luck. Its being put in the gun right im sure, but when i go to use it its like it doesn't want to move & YES I've got the trigger held down while using it lol. Help plsssss!!!!! TY
Just show how you load it. I don't need all the jibber jabber about losing it. That's obvious. Make a different video for compaing to tombow and environment. Just wanted a quick look how to load!!!
Ok - So I dont know if it is just me or not, but when I use my atg gun (714) how come the tap doesn't stick to the paper? It is alway stringy and becomes a ball on the paper? I don't get why it won't stick to the paper...HELP!!!!!!
I just got my ATG gun today. I read the directions but wasn't comfortable so I found your video on you tube. The video was very helpful not only in learnign how to reload the gun but how to actually use the gun. With a little practice I think I've got. Thanks for doing such a greta job on the video! p.s. hope the finger is better!
I just got my ATG 714 today and had trouble loading the tape using the instructions that were included. After several tries, I decided to go to you tube and found your video. Once I reviewed the video I went back to my gun and loaded it with ease. Thank you for your clarity.
your video helped. I couldn't figure out how it wound back on top of the tape and it kept slipping off. Watching your video told me I needed to wind it more and it would hold. Love it :)
I have been looking at this for a long time. It looked difficulty to load. But because of this video I am ready to purchace. Thanks for such clear instruction.
I kept your video as a favourite so that I could review it again when I needed to change the tape. Appreciate your very clear instructions. I am very happy with how well the ATG gun works -- it was a very worthwhile purchase.
Yay! I'm so excited. The doorbell just rang and it was my ATG Gun 714 arrival! I was so excited and prepared this video on hold in my favorites to go back and review to put it together and it was a sinch! I love it already and thank you for the very informative video!
I saw one for sale with the clear cover missing. Do you think it would still be workable? If not do you know where to buy a new clear cover? Lastly, do you think the atg 700 with the adaptor for 1/4 inch tape is also really easy? If so I don't really get why they even made this 1/4" one that is not as versatile..
I would think that it would work without the cover, but I wouldn't recommend it. My fear would be getting dust in the adhesive and the risk of accidentally breaking the tape. I haven't tried the atg 700, but I would assume they load the same way.
THANK YOU! Just running out of my regular tape runner and was considering the ATG Gun after seeing card makers and scrappers use this product on line. I'm absolutely convinced to buy one now that you have proved to me that it really is simple to use. Again, thank you. This was very informative and professional.
I created an account here just so I could thank you for your excellent demonstration! I have the ATG 700 and I always have a most difficult time loading it. I always get the tape in backwards and I did not know about the two slots on the right side in which to thread the tape. The last time it took me 30 minutes to load - with your help it took under 2 minutes! Thank you!
YOUR video is tops! VERY professional! (No background noises to distract you!)I couldn't load my ATG Gun until I saw your video(I was always asking my hubby to load it for me!) But NO MORE. NOW that I have your wonderful video to go back to, I can do this myself. Thanks AGAIN AND AGAIN !!!
Awesome! Thanks! Your instructions were soooo much better than the diagram.
I just got it yesterday...think I should keep the box to store it in? (In my tote, I mean...or I could find a plastic container somewhere. Artbin makes many great sizes!)
The video was great! I think I have mine loaded correctly, but why does too much tape come out. The adhesive sticks to the paper and the tape keeps coming out! I waste a lot of adhesive because the tape pulls out even when I let go of the trigger. Any ideas?
Thank you so much for doing this. I have this gun and do love it but loading it has always been a major pain for me. I would watch the video for the product over and over and then try to load it and still had problems. I loaded mine with you and it was a breeze and I feel for the first time that I got it. I'm still saving your video for the next time.
What is the best place to buiy refills online? TYFS. Best Wishes Lucinda
goldyfishls 1 month ago
Thank you so much. I have been so frustrated and was ready to throw it away. I was making it much harder than it was. TYFS. Best Wishes Lucinda
goldyfishls 1 month ago
Thank you!! I just got one and am so excited! TFS & ignore that idiot comment, eh.
clamor6 2 months ago
Thanks a bunch
sweetdrops45 3 months ago
This comment has received too many negative votes show
Wow, a 6 minute video dedicated to a fucking tape gun? People do have a slight sense of making everything just a bit more complicated. Go drown yourself.
Ludde0100 9 months ago
Thx for showing how to load. Your instructions much easier than those included with ATG. I have a problem when using the gun...the adhesive balls up rather than laying flat. What am I doing wrong?
mslynn245 9 months ago
I currently use the ATG 714 tape gun. I print out 6x4 pictures I have printed and using the tape gun put them on 7x5 card stock. I just put tape on all four edges. I am wondering if you think that using the 1/2 in tape might be a better route to got to tape more surface are area down.
bstvrsn 10 months ago
Thanks for sharing this video. I purchased the ATG today and was frustrated trying to load the tape for the 1st time. The instructions that come with it are useless in my opinion. I decided to youtube seach on how to load the tap and found your video. THANKS! I was finally able to load the tape without any problems.
msutubelooker 1 year ago
Just got my ATG 714 and your video was so easy to follow on loading the tape. Tried it and I love it. Thanks for the help!
lesley51765 1 year ago
i realize I am post to an older video.. I have a pink atg gun that os newly relesaded . I have the WORST time refilling it/ I followed your video step by step , but the adhesive is not coming off on the paper. Please help me
shellyd1000 1 year ago
Thank you for showing this tape. I just refilled mine and it worked beautifully!
Gabriela7398 1 year ago
This is my second thank you. It has been quite a spell since I loaded my tape, and yup, I forgot again. So glad I saved your video in my playlists. Your instruction is concise and shows very clearly how to load the tape. Thanks you so much for taking the time to make this.
valligator1 1 year ago
Love this vid. After my 50 % off coupon and the reward card discount it came to $9.00.
ileyssilver 1 year ago
Thank you for your very instructional tutorial. I went into Michaels today and found one of these, and using my 40%coupon was able to get a good deal:) your instructions were very easy to follow, and as I am a visual learner, written instructions do me no good. But this worked like a charm:) Thank you again!
diamondrose123 1 year ago
Sending a big Thank You for showing how to load the ATG Gun. I just got mine. I think the only problem is that I am left handed and I think it is harder to see where your putting the adhesive down. TFS :)
MamawCindy 1 year ago
Thank you SO much!! Very helpfull! :)
Cindylee29 1 year ago
Thank you thank you!
slick176 1 year ago
Thank you so much for the tutorial!
ThePiecebypiece 1 year ago
Is the used paper strip supposed to pass over the top of the left roll? Mine returns back behind the left roll then twists to make it over the right roll since they have the right side platform raised about 1/2", therefore it is even with the left side which causes the tape to twist. My tape gets looser when I use it so obviously I'm doing something wrong. Heeelllpp please.
1QueenDi 1 year ago
I am ready to pull my hair out!!!!! ARGHHHH!! lol. I got my atg gun about a month or so ago now. The first time I put tape in it it went in and worked like a charm. Tonight however ...different story. I run out & go to refill it and it won't work. I watched 3 diff videos just to be sure I'm doing it right but still no luck. Its being put in the gun right im sure, but when i go to use it its like it doesn't want to move & YES I've got the trigger held down while using it lol. Help plsssss!!!!! TY
KraftyKatsy 1 year ago
Just show how you load it. I don't need all the jibber jabber about losing it. That's obvious. Make a different video for compaing to tombow and environment. Just wanted a quick look how to load!!!
jandtfrompa 1 year ago
The gun you want for multiple tapes is the 700. I don't think you can use the larger tapes in the 714.
CraftCritique 1 year ago
Can we used 1/2 gold tape in the 714 gun ???
BonitaBeautyPretty 1 year ago
This was VERY helpful - thank you!! I am loading my new tape gun for the first time as I watch your helpful instructions. :)
depmodechick 1 year ago
Ok - So I dont know if it is just me or not, but when I use my atg gun (714) how come the tap doesn't stick to the paper? It is alway stringy and becomes a ball on the paper? I don't get why it won't stick to the paper...HELP!!!!!!
Tink4188 1 year ago
u can get it a LOT cheaper than 70 dollars, i v found it on ebay 2 20 dolars and refills 4 under 2 dollars
ninajeanette2 2 years ago
thanks so much for this video! It was a great refresher for me! Seems I always have to remind myself how to refill!! ha!! Thanks again!
dmacdots 2 years ago
I just got my ATG gun today. I read the directions but wasn't comfortable so I found your video on you tube. The video was very helpful not only in learnign how to reload the gun but how to actually use the gun. With a little practice I think I've got. Thanks for doing such a greta job on the video! p.s. hope the finger is better!
born2shoptr 2 years ago
I just got my ATG 714 today and had trouble loading the tape using the instructions that were included. After several tries, I decided to go to you tube and found your video. Once I reviewed the video I went back to my gun and loaded it with ease. Thank you for your clarity.
shewat54 2 years ago
your video helped. I couldn't figure out how it wound back on top of the tape and it kept slipping off. Watching your video told me I needed to wind it more and it would hold. Love it :)
mikinzistiedle 2 years ago
Thank goodness! I just got mine in the mail and had trouble with the last part of loading the adhesive! This video helped!
StayingCrafty 2 years ago
I have been looking at this for a long time. It looked difficulty to load. But because of this video I am ready to purchace. Thanks for such clear instruction.
MYGISAWS 2 years ago
I kept your video as a favourite so that I could review it again when I needed to change the tape. Appreciate your very clear instructions. I am very happy with how well the ATG gun works -- it was a very worthwhile purchase.
eastendcrafter19 2 years ago
Thank you, mine just arrived. Your video confirmed I was doing it correctly. Illustrations were not the best in the package.
leibro4u 2 years ago
Yay! I'm so excited. The doorbell just rang and it was my ATG Gun 714 arrival! I was so excited and prepared this video on hold in my favorites to go back and review to put it together and it was a sinch! I love it already and thank you for the very informative video!
suziecrafter10 2 years ago
Great video!
KatiesCraftCorner 2 years ago
Could you please tell me where you can buy the refills? We have a Staples Store but that is the only office supply store near us!! Thanks!!
JoPuttPutt 2 years ago
I saw one for sale with the clear cover missing. Do you think it would still be workable? If not do you know where to buy a new clear cover? Lastly, do you think the atg 700 with the adaptor for 1/4 inch tape is also really easy? If so I don't really get why they even made this 1/4" one that is not as versatile..
earthlymusic 2 years ago
earthlymusic-
I would think that it would work without the cover, but I wouldn't recommend it. My fear would be getting dust in the adhesive and the risk of accidentally breaking the tape. I haven't tried the atg 700, but I would assume they load the same way.
CraftCritique 2 years ago
THANK YOU! Just running out of my regular tape runner and was considering the ATG Gun after seeing card makers and scrappers use this product on line. I'm absolutely convinced to buy one now that you have proved to me that it really is simple to use. Again, thank you. This was very informative and professional.
suziecrafter10 2 years ago
Thank you!!
55555sms 3 years ago
I created an account here just so I could thank you for your excellent demonstration! I have the ATG 700 and I always have a most difficult time loading it. I always get the tape in backwards and I did not know about the two slots on the right side in which to thread the tape. The last time it took me 30 minutes to load - with your help it took under 2 minutes! Thank you!
lollipopsandbunnies 3 years ago
Thanks so much for the video. Your directions are so clear.
madaughter 3 years ago
YOUR video is tops! VERY professional! (No background noises to distract you!)I couldn't load my ATG Gun until I saw your video(I was always asking my hubby to load it for me!) But NO MORE. NOW that I have your wonderful video to go back to, I can do this myself. Thanks AGAIN AND AGAIN !!!
redcaboose3054 3 years ago
Are you using the 3M 908 Adhesive Transfer Tape (1/4" x 36 yards)?
Lori612 3 years ago
Awesome product!!! Essential for scrapbooking!! I use this the most out of all my supplies!!!
stamped111 3 years ago
Awesome! Thanks! Your instructions were soooo much better than the diagram.
I just got it yesterday...think I should keep the box to store it in? (In my tote, I mean...or I could find a plastic container somewhere. Artbin makes many great sizes!)
Thanks a ton!
scrappysandi 3 years ago
I have the ATG 700 gun but when I refill it as instructed, the glue is on the inside. What am I doing wrong?
Thanks,
Zelda
zeldastamper 3 years ago
Zelda,
I just received one and tried to load it. The same thing is happening to me. Did you ever figure it out. I'm stumped.
Janine
toj9 3 years ago
Zelda & Janine,Watch the video once more.You are probably loading the tape upside down. Turn it OVER.
redcaboose3054 3 years ago
The video was great! I think I have mine loaded correctly, but why does too much tape come out. The adhesive sticks to the paper and the tape keeps coming out! I waste a lot of adhesive because the tape pulls out even when I let go of the trigger. Any ideas?
sillymommy23 3 years ago
Thank you I was undecides on the purchase, but this video did the trick. Thanks for the demo. AB
auntiebeanie 3 years ago
Thank you so much for doing this. I have this gun and do love it but loading it has always been a major pain for me. I would watch the video for the product over and over and then try to load it and still had problems. I loaded mine with you and it was a breeze and I feel for the first time that I got it. I'm still saving your video for the next time.
smallfryk 4 years ago